Discover more like Kelford Cams TOYOTA 2RZ/3RZ TACOMA PERFORMANCE CAMS - 180-B

264/272 Degrees advertised duration. 9.65mm/9.65mm lift Stage 1 high performance cams for mildy tuned, turbocharged 3RZ-FE engine builds.

290/290 Degrees advertised duration. 10.60mm/10.20mm lift Drag racing cams to suit top end, high HP Turbocharged 3RZ-FE engines.

288/306 Degrees advertised duration. 11.55mm/11.60mm lift Drag racing cams to suit high boost race engine using alcohol. These cams must use shimless buckets.

280/286 Degrees advertised duration. 11.00mm/11.00mm lift Drag racing cams to suit high boost engines in the 800-1000 HP range. These cams must use shimless buckets.

Designed specifically for the Toyota 3RZ-FE Engine 31mm OD. Kelford Cams DLC Coated Buckets Feature: larger internal fillet and reinforced skirt. Increased rigidity increases both camshaft and bucket longevity. DLC coated follower surface decrease friction Decreases surface wear and oil temps. Impro...

94lb at 36.10mm installed height. Coil bind at 23.3mm. KVS180-BT, Toyota 3RZ-FE High Perfformance Beehive Spring and Titanium Retainer Kit. 94lb seat pressure @ 36.1mm, 186lb @11.5mm lift. Coil bind is 23.3mm. Use OEM Seat.

TOYOTA 1GR-FE. Kelford Racing, High performance PACALOY valve spring set for turbocharged and supercharged 1GR-FE engines.

Kelford Cams Toyota 3S-GE (Gen 3) shim under bucket Performance Cam - 3-195-B 296/284 Degrees advertised duration. 11.20mm/10.50mm lift Race cams to suits professionally built competition engines.

Kelford Cams Toyota 3S-GE (Gen 3) shim under bucket Performance Cam - 3-195-A 284/276 Degrees advertised duration. 10.50mm/10.20mm lift Rally cams to suits big valve head, increased compression.

264/264 Degrees advertised duration. 9.70mm/9.65mm lift Stage 1 mild performance cams to suit a near stock engine.

264/270 adv., 228/232 @ 1mm, 11.5mm/10.75mm valve lift Stage1 performance cams, suited to 500-700hp, 8000rpm and 30psi when matched with our spring kit.

284/284 Degrees advertised duration. 10.60mm/10.55mm lift Stage 3 cams for well modified 1FZ engines.

276/284 Degrees advertised duration. 10.35mm/10.55mm lift 1FZ-FE Turbo cams for high HP engine builds.

274/276 adv., 236/240 @ 1mm, 11.75mm/11.15mm valve lift Stage2 Street/Strip cams, Suited to 700-1000hp, Great with twin 62mm turbos and E85.

270/270 Degrees advertised duration. 9.65mm/9.65mm lift Stage 2 cams to suit mildly modified engines.

290/274 Degrees advertised duration. 10.60mm/9.90mm lift Rally cams for good midrange power in mild engines.

276/270 Degrees advertised duration. 9.90mm/9.60mm lift 3S-GE Gen 2 Camshaft - Ultimate street or club race cams.

314/302 Degrees advertised duration. 10.60mm/10.25mm lift Super race cams to suit light car, increased compression, big valves.

300/286 Degrees advertised duration. 10.60mm/9.90mm lift Rally or circuit racing cams to suit ported head, 45mm throttles

PLEASE NOTE THESE ARE A SPECIAL ORDER CAM. ALLOW 4 WEEKS FOR MANUFACTURE AND DELIVERY 270/268 - 10.30mm/10.15mm Valve Lift Toyota Mark 5 Supra B58 Stage 1 Performance Camshaft - 270/268 cams to suit Gen 2 B58 engine with bolt on intake, exhaust and turbo upgrades. For an engine producing around 550-...

300/294 - 10.50mm/10.25mm Valve Lift Toyota 4AGE Racing Camshaft: High Lift cams to suit professionally built naturally aspirated 4AGE 16V competition engines. Will pull to around 9.5k rpm depending on engine. HV high velocity camshaft profile, more cam sweep area than the stock shim will allow. Mus...

280/286 adv., 242/244 @ 1mm, 12.30mm/11.65mm valve lift Drag cams, Great for 4.0ltr stroker builds and alcohol blended fuels. Suits professionally built engines. Suits fixed timing or can be run as variable, great care needed checking Piston to Valve. Rated 1200-1600hp.

286/286 - 10.80mm/10.75mm Valve Lift 286 Stage 2 NA cams to suit performance naturally aspirated TB48DE engines. Improved high rpm power. Retains NVCS / N-VCT variable intake cam timing. Kelford Cams recommend KVS04 valve spring.