Discover more like Kelford Cams Toyota 3S-GE (Gen 3) shim under bucket TURBO Performance Cam - 3-195-TA

Kelford Cams Toyota 3S-GE (Gen 3) shim under bucket Performance Cam - 3-195-B 296/284 Degrees advertised duration. 11.20mm/10.50mm lift Race cams to suits professionally built competition engines.

Kelford Cams Toyota 3S-GE (Gen 3) shim under bucket Performance Cam - 3-195-A 284/276 Degrees advertised duration. 10.50mm/10.20mm lift Rally cams to suits big valve head, increased compression.

276/270 Degrees advertised duration. 9.90mm/9.60mm lift 3S-GE Gen 2 Camshaft - Ultimate street or club race cams.

290/274 Degrees advertised duration. 10.60mm/9.90mm lift Rally cams for good midrange power in mild engines.

314/302 Degrees advertised duration. 10.60mm/10.25mm lift Super race cams to suit light car, increased compression, big valves.

300/286 Degrees advertised duration. 10.60mm/9.90mm lift Rally or circuit racing cams to suit ported head, 45mm throttles

272/280 - 10.00mm/10.00mm Valve Lift 4AGE-16V High Lift Cams for high RPM drag racing engines. Suits turbo sizing 48-58mm. Great with E85. HV high velocity cam profile, more cam sweep area than the stock shim will allow. Must convert to shimless or shim under bucket style lifter. Kelford Cams recommends KVS101-BT valve spring.

307/300 Degrees advertised duration. 12.25mm/10.65mm lift All motor drag race or lightweight race car cams to suit 12.5/1 compression and close ratio gearbox.

300/294 - 10.50mm/10.25mm Valve Lift Toyota 4AGE Racing Camshaft: High Lift cams to suit professionally built naturally aspirated 4AGE 16V competition engines. Will pull to around 9.5k rpm depending on engine. HV high velocity camshaft profile, more cam sweep area than the stock shim will allow. Mus...

290/282 - 10.30mm/10.10mm Valve Lift High lift Rally Cams to suit racing 4AGE 16V engines with big valves, increased compression and well designed intake and exhaust system. Good mid-high rpm power. HV high velocity cam profile, more cam sweep area than the stock shim will allow. Must convert to shimless or shim under bucket style lifter. Kelford Cams recommends KVS101-BT valve spring.

318/304 - 11.00mm/10.10mm Valve Lift 4AGE-16V Naturally Aspirated Camshafts - High Lift single seater racing or drag cams to suit professionally built competition 4AGE 16V engine. Will pull to around 10.5k rpm depending on engine. More top end power than the 193HV-B. HV high velocity cam profile, mo...

276/284 Degrees advertised duration. 10.35mm/10.55mm lift 1FZ-FE Turbo cams for high HP engine builds.

PLEASE NOTE THESE ARE A SPECIAL ORDER CAM. ALLOW 4 WEEKS FOR MANUFACTURE AND DELIVERY 270/268 - 10.30mm/10.15mm Valve Lift Toyota Mark 5 Supra B58 Stage 1 Performance Camshaft - 270/268 cams to suit Gen 2 B58 engine with bolt on intake, exhaust and turbo upgrades. For an engine producing around 550-...

264/264 Degrees advertised duration. 9.70mm/9.65mm lift Stage 1 mild performance cams to suit a near stock engine.

264/272 adv., 232/232 @ 1mm, 9.65mm/9.65mm valve lift Toyota 1GR-FE Engine Cam designed to work with a small twin turbo setup or single 60-68mm turbo. Good throttle response.

TOYOTA 1GR-FE. Kelford Racing, High performance PACALOY valve spring set for turbocharged and supercharged 1GR-FE engines.

PLEASE NOTE THESE ARE A SPECIAL ORDER CAM. ALLOW 4 WEEKS FOR MANUFACTURE AND DELIVERY 288/288 - 10.35mm/10.80mm Valve Lift Toyota Supra B58 Camshafts - 288 Stage 3 drag racing cams for professionally built B58 Gen 2 engines making 1200hp. Turbo sizing 72mm on high boost. Fuel type ethanol blend or m...

258/258 Degrees advertised duration. 9.30mm/9.30mm lift. 3S-GTE Turbo cams for street performance engines with stock turbo.

264/272 Degrees advertised duration. 9.65mm/9.65mm lift Stage 1 high performance cams for mildy tuned, turbocharged 3RZ-FE engine builds.

284/284 Degrees advertised duration. 10.60mm/10.55mm lift Stage 3 cams for well modified 1FZ engines.

270/270 Degrees advertised duration. 9.60mm/9.60mm lift. 3S-GTE Turbo cams for serious street performance. Turbo and ECU upgrade required.

270/270 Degrees advertised duration. 9.65mm/9.65mm lift Stage 2 cams to suit mildly modified engines.

288/306 Degrees advertised duration. 11.55mm/11.60mm lift Drag racing cams to suit high boost race engine using alcohol. These cams must use shimless buckets.