Discover more like Seal kit for Fox float air sleeve service

- Seals and parts for a 2022 Fox Float X air sleeve service - Also used to service a Marzocchi Bomber Air sleeve This kit is great for regular maintenance and we would recommend doing new seals in your shock at least once a year if not more. This kit is meant to service your rear shock's air can, not to do a full damper rebuild.

What we have here is a refined air sleeve kit providing you with reduced friction to give you better traction at ground and a better overall feel bike and trail Air sleeve kits fit to: - Fox Floatfits: - 2006 on Float Shocks,other than Fox Float X2. - Rockshox Monarch/Monarch Plus fits: - All Rocksh...

Shockcraft complete air seal kit to fit Fox Float air shocks from 2000 onward.This kit has been designed for a longer life with tougher seals than factory. We still recommend 25 hour clean and re-lube.The seal kit contains the air shaft seal, air pi

Time to service your air sleeve Use what we use on a daily basis our premium performance air sleeve rebuild kits with every thing you need to get the job done We recommend service intervals to be between 30/50hrs ride time or 2 - 3 times a year depending and how much you ride and what the weather co...

Faux Flo Air Sleeve Kit Shockcraft's complete air seal kit to fit Fox Float air shocks from 2000 onward.This kit has been designed for a longer life. We still recommend 25 hour clean and re-lube.The seal kit contains the air shaft seal, air piston

Used to rebuild and replace all seals on the Fox 36 air shafts with the NA2 design. - Fits all 36 forks with NA2 air shaft including Factory, Performance Series Elite, Performance Series and Rhythm. - Also fits Marzocchi Bomber Z1 air shaft. - Recommended replacement intervals from Fox = 125 Hours T...

Details Faux Flo Air Sleeve Kit Shockcraft's complete air seal kit to fit Fox Float DPX2 air shocks from 2017-2021 onward.This kit has been designed for a longer life. We still recommend 25 hour clean and re-lube.The seal kit contains the ai

Damper air spring seal kit fits both the below shocks but will have leftover seal depending on your compression adjuster vs climb-switch spec.See Related Products for further information on components of this kit.PDF showing contents of damper &

Here's an air can service kit for RockshoxMonarch and Monarch plus shocks from year 2011 onwards. It contains all of the parts you need for an air can service. These seals have reduced friction on the stock kits, we have been impressed. The only other thing you need is a quality assembly grease/seal...

Need to adjust the end stroke ramp up of your Fox Float rear shock Vorsprung AVS (Air Volume Spacer) kits are now available Each Vorsprung AVS kit includes 3 spacers (small, medium and large) that simply snap into place underneath your bottom-out plate inside the air sleeve. They are compatible with...

Here's an air can service kit for all years of Rockshox Super and Super deluxe shocks. It contains all of the parts you need for an air can service. These seals have reduced friction on the stock kits, we have been impressed. The only other thing you need is a quality assembly grease/seal lubricant....

Application: 2018 and later Fox 36 mm stanchioned forks (excluding E-bike version), including Fox 36 Rhythm forksAlso fits Marzocchi Z1 2020 forksKit includes o-rings and quad ring for the air springPDF showing contents of kit is available here

Kit fits both the below shocks but will have leftover seal depending on your compression adjuster vs climb-switch spec.Identification2016-2018 Fox FLOAT X2 has an air-can outer layer that twists to remove.2019-2020 Fox FLOAT X2 has an air-can outer layer

Fox 36 Float NA2 2018-2021 air shaft assembliesUse for repair or travel changeFit F36 Float 2018-2021 forks with NA2 air system and 1.287" (32.7 mm) stanchion ID (except e-bike only shafts which have ID 1.214")The 2021 shafts are longer (bigger negative chamber) than the 2018-20 air shaftsSizes ordered in from supplier upon customer order. Usually available approx 2-3 days lead-time.

Faux Flo Micro Brain Seal Kit Shockcraft's complete seal kit to fit Specialized-Fox Micro Brain rear shocks from 2011-17.The seal kit contains air can seals and damper seals for a full rebuild including green travel check o-ring. PDF showing conten

Changing volume spacers in the shock is an internal adjustment that allows you to change the amount of mid stroke and bottom out resistance. - If you have set your sag correctly and are using full travel (bottoming out) too easily, then you could install a larger spacer to increase bottom out resist...

Cane Creek rear shox air sleeve service kits for the DB Air and Inline Air shox, recommend servicing every 50hrs These service kit are for the updated air piston assembly Blue and Purple, The DB Air has a Blue air piston and the Inline Air has a Purple air piston.

SKF Low Friction Flangeless Fork Seal kit for Fox 36 mm forks These flangeless seals have the same fork compatibility as the flanged option Flangeless seals provide a tighter fit into the lower leg (to resist popping out with internal air leaks

Application:9 mm kit fits 2014 Fox Float DPS shocks9.5 mm kit fits 2000-2014 Fox Float shocksBoost valve kit fits 2014 Float CTD Boost Valve ShocksKits include o-rings for the damper.PDFs showing contents of kits:• 9 mm Damper O-ring Kit • 9.5 mm Damper O-ring Kit• 9 mm Damper Boost Valve Seals

See Related Products for further information on components of this kit.O-Ring KitContains oil and air seals for both generations of Swinger 3 Way.Installation NotesClean all seal grooves thoroughly with a dry paper towel and lightly grease all static seal

SKF Low Friction Flanged Fork Seal kit for Fox 36 mm forks These flanged seals have the same fork compatibility as the flangeless option Flangeless seals provide a tighter fit into the lower leg (to resist popping out with internal air leaks

Fox air seal for air springnegativecoil modal years between 2003- 2013 FOX No. 036-01-010 - seal fits 80mm to 120mmtravel Fox Forks (I.D. 22.07mm X O.D. 28.3mm H 3.78mm) FOX No. 036-01-011 - seal fits2003 F80 RLT(O.D. 22.55mm X I.D.28.75mm X H 3.78mm) FOX No. 036-01-018 seal fit 140mm travel Fox Forks ( I.D. 21.61mm X O.D. 27.81mm X H3.78mm)

Changing volume spacers in the shock is an internal adjustment that allows you to change the amount of mid stroke and bottom out resistance. - If you have set your sag correctly and are using full travel (bottoming out) too easily, then you could install a larger spacer to increase bottom out resist...