Discover more like Rear Shock Service Kit for Fox Float Shocks (Shockcraft) Shockcraft

Damper air spring seal kit fits both the below shocks but will have leftover seal depending on your compression adjuster vs climb-switch spec.See Related Products for further information on components of this kit.PDF showing contents of damper &

Faux Flo Micro Brain Seal Kit Shockcraft's complete seal kit to fit Specialized-Fox Micro Brain rear shocks from 2011-17.The seal kit contains air can seals and damper seals for a full rebuild including green travel check o-ring. PDF showing conten

See Related Products for further information on components of this kit.Identification:1997-1999 Fox Vanilla R coil shock is inline with a 2-piece shock body (screwed on eyelet) and rebound adjuster1997-1999 Fox Vanilla RX coil shock is a piggyback with a

Shockcraft complete air seal kit to fit Fox Float air shocks from 2000 onward.This kit has been designed for a longer life with tougher seals than factory. We still recommend 25 hour clean and re-lube.The seal kit contains the air shaft seal, air pi

See Related Products for further information on components of this kit.Identification2004-2007 Swinger 4 way shocks are piggy back with SPV damping and no compression adjusters.2004-2007 Swinger 6 way shocks are piggy back with SPV damping and 2 individua

See Related Products for further information on components of this kit.O-Ring KitContains oil and air seals for both generations of Swinger 3 Way.Installation NotesClean all seal grooves thoroughly with a dry paper towel and lightly grease all static seal

See Related Products for further information on components of this kit.Identification2004-2007 Swinger 4 way shocks are piggy back with SPV damping and no compression adjusters.2004-2007 Swinger 6 way shocks are piggy back with SPV damping and 2 individua

Clamps fit all Fox FLOAT shocks and many more. Required for full damper service. Handy for air-can service to remove overtightened air-cans and stuck hardware.2000-2004 FLOAT, FLOAT R, FLOAT RL, AVA2005-2013 FLOAT RP2, FLOAT RP3, Specalized Tr

Kit fits both the below shocks but will have leftover seal depending on your compression adjuster vs climb-switch spec.Identification2016-2018 Fox FLOAT X2 has an air-can outer layer that twists to remove.2019-2020 Fox FLOAT X2 has an air-can outer layer

- Seals and parts for a 2022 Fox Float X air sleeve service - Also used to service a Marzocchi Bomber Air sleeve This kit is great for regular maintenance and we would recommend doing new seals in your shock at least once a year if not more. This kit is meant to service your rear shock's air can, not to do a full damper rebuild.

Need to adjust the end stroke ramp up of your Fox Float rear shock Vorsprung AVS (Air Volume Spacer) kits are now available Each Vorsprung AVS kit includes 3 spacers (small, medium and large) that simply snap into place underneath your bottom-out plate inside the air sleeve. They are compatible with...

Kit containing all the essentials for servicing your FIT4/GRIP/GRIP2 damper Fox Forks.

What we have here is a refined air sleeve kit providing you with reduced friction to give you better traction at ground and a better overall feel bike and trail Air sleeve kits fit to: - Fox Floatfits: - 2006 on Float Shocks,other than Fox Float X2. - Rockshox Monarch/Monarch Plus fits: - All Rocksh...

Vorsprung Luftkappe air piston with higher volume negative Fits 2018 Fox Float 36 Evol Performance Factory Series forks Requires roll pin tool to install

Vorsprung Fractive upgrade tuning kit for Fox FIT4 Factory-Series fork dampers. Requires significant tools and knowledge to install. Can be installed as part of any Shockcraft complete-fork or damper-only service

CJSuspension Fox Damper/Air Service Kits These kit are made to benefit your components with longer life span due to better quality compounds. X2 and Mirco kit come with air sleeve service O Rings Float 9mm, 9.5mm, Float X and DPX2 don't come with air sleeve kit here's a link to the air sleeve kits h...

Fox 36 Float NA2 2018-2021 air shaft assembliesUse for repair or travel changeFit F36 Float 2018-2021 forks with NA2 air system and 1.287" (32.7 mm) stanchion ID (except e-bike only shafts which have ID 1.214")The 2021 shafts are longer (bigger negative chamber) than the 2018-20 air shaftsSizes ordered in from supplier upon customer order. Usually available approx 2-3 days lead-time.

Fits Manitou Evolver ISX 6, ISX4 Rear Shocks 2007-2010 (Shim SPV)Fits Manitou Swinger Air X3, X4 2007-2009Fits Manitou Radium Split 2007-2009New Old Stock (NOS)Manitou Part Code: 83-2708

Replacement kit for snapped top out spring. Please note: this will fit all Fox Float Fork that rely on coil negative springs, models from 2006 to 2012 approximately.

Top notch damper/air service kit

The Performance Series 2.0 IFP smooth body shocks contain the latest in shock technology to transform the performance of your Truck or SUV. They use our race-proven damping control to provide a comfortable on-road ride and predictable off-road handling in even the toughest conditions. The precision ...

Kit fits all the below shocks but will have leftover seals.Revox shocks have 14mm shafts.Will not fit earlier year shocks with 1/2" (12.7 mm) damper shaft, individual damper dials and the 16 mm hex SPV volume adjuster.Identification2010-2015 Manitou Revox

The Performance Series 2.0 IFP smooth body shocks contain the latest in shock technology to transform the performance of your Truck or SUV. They use our race-proven damping control to provide a comfortable on-road ride and predictable off-road handling in even the toughest conditions. The precision ...