Discover more like Fox F36 NA2 Internal Air Seal Kit (Shockcraft) Shockcraft

Fox 36 Float NA2 2018-2021 air shaft assembliesUse for repair or travel changeFit F36 Float 2018-2021 forks with NA2 air system and 1.287" (32.7 mm) stanchion ID (except e-bike only shafts which have ID 1.214")The 2021 shafts are longer (bigger negative chamber) than the 2018-20 air shaftsSizes ordered in from supplier upon customer order. Usually available approx 2-3 days lead-time.

Kit containing everything for servicing your Fox F36 GRIP/GRIP2 forks with NA2 EVOL Air Spring. These forks were built 2018-2020 and have GRIP or GRIP2 dampers which can be tuned or upgraded.Earlier NA2 forks DPA forks cannot use Secus or Luftkappe

Shockcraft complete air seal kit to fit Fox Float air shocks from 2000 onward.This kit has been designed for a longer life with tougher seals than factory. We still recommend 25 hour clean and re-lube.The seal kit contains the air shaft seal, air pi

See relevant Related Products for photos and further information on the items in this fork service kit.Kit containing everything for servicing your Fox F36 GRIP/GRIP2VVC forks with NA2 EVOL Air Spring. These forks were built 2021 and have GRIP or G

Used to rebuild and replace all seals on the Fox 36 air shafts with the NA2 design. - Fits all 36 forks with NA2 air shaft including Factory, Performance Series Elite, Performance Series and Rhythm. - Also fits Marzocchi Bomber Z1 air shaft. - Recommended replacement intervals from Fox = 125 Hours T...

Application: 2018-20 Fox 36 forks with GRIP2 dampers.Kit includes o-rings for the entire damper assembly.PDF showing contents of kit is available here

Application: 2018 Fox 36 forks with GRIP dampers.Kit includes o-rings for the entire damper assembly.PDF showing contents of kit is available here.

Faux Flo Air Sleeve Kit Shockcraft's complete air seal kit to fit Fox Float air shocks from 2000 onward.This kit has been designed for a longer life. We still recommend 25 hour clean and re-lube.The seal kit contains the air shaft seal, air piston

Damper air spring seal kit fits both the below shocks but will have leftover seal depending on your compression adjuster vs climb-switch spec.See Related Products for further information on components of this kit.PDF showing contents of damper &

Details Faux Flo Air Sleeve Kit Shockcraft's complete air seal kit to fit Fox Float DPX2 air shocks from 2017-2021 onward.This kit has been designed for a longer life. We still recommend 25 hour clean and re-lube.The seal kit contains the ai

Here's an air can service kit forFox Float shocks from 2006 onwards, including Fox Float X. It contains all of the parts you need for an air can service. This service kit will not work on Fox Float X2 shocks. These seals have reduced friction on the stock kits, we have been impressed. The only other...

SKF Low Friction Flangeless Fork Seal kit for Fox 36 mm forks These flangeless seals have the same fork compatibility as the flanged option Flangeless seals provide a tighter fit into the lower leg (to resist popping out with internal air leaks

Faux Flo Micro Brain Seal Kit Shockcraft's complete seal kit to fit Specialized-Fox Micro Brain rear shocks from 2011-17.The seal kit contains air can seals and damper seals for a full rebuild including green travel check o-ring. PDF showing conten

Time for a air chamber rebuild look no further we have you covered These rebuild kits work with all the NA2, EVOL and Rhythm Air Springs

SKF Low Friction Flanged Fork Seal kit for Fox 36 mm forks These flanged seals have the same fork compatibility as the flangeless option Flangeless seals provide a tighter fit into the lower leg (to resist popping out with internal air leaks

Kit fits both the below shocks but will have leftover seal depending on your compression adjuster vs climb-switch spec.Identification2016-2018 Fox FLOAT X2 has an air-can outer layer that twists to remove.2019-2020 Fox FLOAT X2 has an air-can outer layer

- Seals and parts for a 2022 Fox Float X air sleeve service - Also used to service a Marzocchi Bomber Air sleeve This kit is great for regular maintenance and we would recommend doing new seals in your shock at least once a year if not more. This kit is meant to service your rear shock's air can, not to do a full damper rebuild.

See Related Products for further information on components of this kit.O-Ring KitContains oil and air seals for both generations of Swinger 3 Way.Installation NotesClean all seal grooves thoroughly with a dry paper towel and lightly grease all static seal

Air can seals for Manitou McLeod rear shocks Fit single and dual (king) can Kit includes quad ring, wiper seal, top-out bumper, glide rings and backup ring Manitou Part Code: 142-31535-K002

Complete seal kit (air sleeve and damper) for Manitou radium rear shocks with lockout lever This version is for 40 mm ID air-cans, measuring 43 mm OD Kit contains air can seals, damper seals, rebound knob seals detent ball plus lockout lever seals d

Complete seal kit (air sleeve and damper) for Manitou radium rear shocks with lockout lever This version is for 43 mm ID air-cans, measuring 46 mm OD Kit contains air can seals, damper seals, lockout lever seals and detent balls for rebound and lockout

Air O-Ring kit for Manitou McLeod and Mara Inline shocks from 2014 to 2023We've made this kit easy to install by shipping with a full build sheetThe build sheet is printed to scale and shows the contents of the kit and locations for seal installSeals can be laid out on top of the drawing to check confirm size and locationPDF Build Sheet showing contents of kit is available here

Fits Manitou Evolver ISX 6, ISX4 Rear Shocks 2007-2010 (Shim SPV)Fits Manitou Swinger Air X3, X4 2007-2009Fits Manitou Radium Split 2007-2009New Old Stock (NOS)Manitou Part Code: 83-2708