Discover more like Motion Pro Dual Chamber WP Fork Cap Wrench 50mm 6pt Hex

50mm, 6-point box wrench for removing the fork cap (cartridge) on WP 4860 MXMA dual chamber closed cartridge (WP USD 48 mm) forks on late-model KTMs Features: - 12mm slot for holding the damper rod for removing the rebound bolt. This allows for the removal of the cartridge from the lower fork leg. -...

50mm, 6-point box wrench for removing the fork cap (cartridge) on WP 4860 MXMA dual chamber closed cartridge (WP USD 48 mm) forks on late-model KTMs Features: - 12mm slot for holding the damper rod for removing the rebound bolt. This allows for the removal of the cartridge from the lower fork leg. -...

50mm, 6-point box wrench for removing the fork cap (cartridge) on WP 4860 MXMA dual chamber closed cartridge (WP USD 48 mm) forks on late-model KTMs Features: - 12mm slot for holding the damper rod for removing the rebound bolt. This allows for the removal of the cartridge from the lower fork leg. -...

50mm, 6-point box wrench for removing the fork cap (cartridge) on WP 4860 MXMA dual chamber closed cartridge (WP USD 48 mm) forks on late-model KTMs Features: - 12mm slot for holding the damper rod for removing the rebound bolt. This allows for the removal of the cartridge from the lower fork leg. -...

- Aluminium To work on the likes of: KTM 250SX 250SX-F 350SX-F 450SX-F

Wrench for removing front fork cap. Features: - 2 wrench sizes available: 49 mm for KYB and 50 mm for SHOWA and 50 mm KTM WP front fork. - Open wrench design for easy operation in small space. - Opposite end of the wrench is rod stopper to hold piston rod when removing piston inner cartridge. - Sock...

Wrench for removing front fork cap. Features: - 2 wrench sizes available: 49 mm for KYB and 50 mm for SHOWA and 50 mm KTM WP front fork. - Open wrench design for easy operation in small space. - Opposite end of the wrench is rod stopper to hold piston rod when removing piston inner cartridge. - Sock...

Wrench for removing front fork cap. Features: - 2 wrench sizes available: 49 mm for KYB and 50 mm for SHOWA and 50 mm KTM WP front fork. - Open wrench design for easy operation in small space. - Opposite end of the wrench is rod stopper to hold piston rod when removing piston inner cartridge. - Sock...

Wrench for removing front fork cap. Features: - 2 wrench sizes available: 49 mm for KYB and 50 mm for SHOWA and 50 mm KTM WP front fork. - Open wrench design for easy operation in small space. - Opposite end of the wrench is rod stopper to hold piston rod when removing piston inner cartridge. - Sock...

The Krieghoff T-Handled Stock Wrench fits and removes all Krieghoff Stocks. It is a 5mm Allen head. Other Krieghoff Wrenches Available: - Trigger and Selector Locking Wrench (1.27mm Hex) - Comb Adjustment Wrench (2.5mm Hex) - Trap Special/Pro Rib Wheel Locking Wrench (1.5mm Hex) - Safety Catch Locking Wrench (2mm Hex

2.5mm hex wrench to adjust your K-80 adjustable comb. T-handle and plated shaft. Measures: 125mm Length An essential accessory if you have an adjustable comb. Other Krieghoff Wrenches Available: - Stock Removal Wrench (5mm Hex) - Trigger and Selector Locking Wrench (1.27mm Hex) - Trap Special/Pro Ri...

Fork cap tool specific to Sachs forks

This is a 1.5mm Hex Wrench used to loosen and tighten the adjustment wheel on the K-80 Trap Special Barrels and also the K-80 Pro Rib Barrels. You start by slacking the locking screw to allow the wheel to be turned. Then use the wheel to adjustable the height of the rib. Then tighten the locking scr...

This wrench is 1.27mm, 0.050", and is the correct size to adjust the trigger position on your K-80 or K-20. The same wrench locks and unlocks the barrel selector. Please note: When adjusting the trigger position you must also loosen the front selector locking screw in the trigger blade. This is beca...

Double end design allows you to remove the cartridge on Showa SFF forks and twin chamber Showa forks. Tool holds cartridge so it can be removed from the fork cap. This tool will help you to reduce risk of damage during disassembly

On all K-80 guns the safety catch can be locked in the forward, off, position. This is intended for competition use only as the gun not closed until safely on the firing point. To lock the safety you need to first remove the stock. The locking screw is located on the right-hand side of the top strap...

Hex shaped security wrench for adjusting Loss Prevention products.

Kit includes: - Motion Pro Enduro Pro Tyre Lever 8 1/2in Long (Pair) (MP080051) - Motion Pro Tyre/tube Valve Core Remover (MP080183) - Motion Pro Rimshield II Tyre Change Protector (2pc) (MP080546) - Motion Pro Bead Buddy II - Forged Alloy (MP080471

Kit includes: - Motion Pro Enduro Pro Tyre Lever 8 1/2in Long (Pair) (MP080051) - Motion Pro Tyre/tube Valve Core Remover (MP080183) - Motion Pro Rimshield II Tyre Change Protector (2pc) (MP080546) - Motion Pro Bead Buddy II - Forged Alloy (MP080471

Product Overview Avid 4-in-1 multi-wrench is your common glow plug and clutch nut tool for nitro cars. Details - 4-in-1 multi-wrench is made from durable steel. - 8mm nut wrench for glow plugs. - 10mm nut wrench for clutch nuts. - 3mm hex for M4 chassis screws. - 5mm hex for pillow balls. - Laser-etched logo.

The PRO pedal wrench has an L-shaped 8 mm hex tool on one side, with an additional ball end of the same size protruding from the other end of the handle. Features - 8mm - Ergonomic grip - Steel (vanadium) About PRO The Pro brand was founded in 1981 and has been developing bike components and accesso...

The Peak Pro chamber is the engine for the entire device. A unique sensor embedded inside of the chamber communicates with your Peak Pro, keeping your temperature exactly where it needs to be - regardless of how hard you inhale or how much oil you put in. The end result is the most consistent and co...

Essential tools to help maintain Your chain and control cables. Kit includes: - Motion Pro Chaign Alignment Tool MP080048) - Motion Pro Slacksetter Pro - Chain Slack Setting Tool (MP080674) - Motion Pro Cable Luber v3 (MP080609