Discover more like Krieghoff Adjustable Comb 2.5 Wrench

The Krieghoff T-Handled Stock Wrench fits and removes all Krieghoff Stocks. It is a 5mm Allen head. Other Krieghoff Wrenches Available: - Trigger and Selector Locking Wrench (1.27mm Hex) - Comb Adjustment Wrench (2.5mm Hex) - Trap Special/Pro Rib Wheel Locking Wrench (1.5mm Hex) - Safety Catch Locking Wrench (2mm Hex

This wrench is 1.27mm, 0.050", and is the correct size to adjust the trigger position on your K-80 or K-20. The same wrench locks and unlocks the barrel selector. Please note: When adjusting the trigger position you must also loosen the front selector locking screw in the trigger blade. This is beca...

Changing chokes is a breeze with Extreme Chokes proprietary stainless collapsible choke wrench designed specifically for Krieghoff shotguns, featuring split-barrels design. Also our 4 slot 12g Gauge Wrench that fits the Extreme Chokes made for Zoli Kolar, Beretta, Blaser, Browning Perazzi. Change co...

This is a 1.5mm Hex Wrench used to loosen and tighten the adjustment wheel on the K-80 Trap Special Barrels and also the K-80 Pro Rib Barrels. You start by slacking the locking screw to allow the wheel to be turned. Then use the wheel to adjustable the height of the rib. Then tighten the locking scr...

On all K-80 guns the safety catch can be locked in the forward, off, position. This is intended for competition use only as the gun not closed until safely on the firing point. To lock the safety you need to first remove the stock. The locking screw is located on the right-hand side of the top strap...

The Krieghoff K-80 Speed Wrench for KTW Thinwall Chokes - For Parcours Parcours-X Thinwall Chokes This wrench fits the Krieghoff KTW Thinwall Choke Tubes especially for the Parcours and Parcours-X Barrels. The plastic section inserts into the choke for a firm fit. Then the teeth on the wrench fit di...

Krieghoff Speed choke wrench, foldable, for Krieghoff factory chokes

Three wrenches in One. 20b, 28b and.410g. This wrench is the perfect accessory for the K-20 3 barrel set owner. Flat black ring type spanner wrench fully encloses the choke tube and ensures removal of even the most stubborn choke.

The Krieghoff K-80 Factory Choke Tube Wrench Flat black spanner type wrench to fit all K-80 choke tubes, including black Steel Factory Chokes and all of the Titanium Choke Series including Gold Titanium and Black Titanium. Ring type spanner wrench fully encloses choke tube and ensures removal of even the most stubborn choke.

Brand new aftermarket product. In good quality. Made of T6061 aluminum alloy. Color: Black Adjustable Wrench: From -3AN to -12AN Total length: Approx. 17.3cm PACKAGE CONTENTS: 1 x 3AN to 12AN Adjustable Wrench Key words: AN3 Wrench AN4 Wrench AN6 Wrench AN8 Wrench AN10 Wrench AN12 Wrench

For Briley choke installation THIS CHOKE WRENCH IS NOT COMPATIBLE WITH KRIEGHOFF THIN WALL CHOKES

Reversible Jaw Adjustable Wrench A Reversible jaw with extra capacity allows working with bigger diameter nuts and pipes with the same adjustable wrench. Professional multipurpose adjustable wrench. Double Scale (mm. and inches.) Reversible jaw for working on pipes IREGA 100% quality assured Length: 259mm Capacity Comparison 10 inch IREGA 92WR - 40mm STANDARD ADJUSTABLE WRENCH - 29mm Made in Spain

Reversible Jaw Adjustable Wrench A Reversible jaw with extra capacity allows working with bigger diameter nuts and pipes with the same adjustable wrench. Professional multipurpose adjustable wrench Double Scale (mm. and inches.) Reversible jaw for working on pipes IREGA 100% quality assured Length: 207mm Capacity Comparison 8 inch IREGA 92WR - 34mm STANDARD ADJUSTABLE WRENCH - 24mm Made in Spain

Reversible Jaw Adjustable Wrench A Reversible jaw with extra capacity allows working with bigger diameter nuts and pipes with the same adjustable wrench. Professional multipurpose adjustable wrench Double Scale (mm. and inches.) Reversible jaw for working on pipes IREGA 100% quality assured Length: 161mm Capacity Comparison 6 inch IREGA 92WR - 27mm STANDARD ADJUSTABLE WRENCH - 19mm Made in Spain

Reversible Jaw Adjustable Wrench A Reversible jaw with extra capacity allows working with bigger diameter nuts and pipes with the same adjustable wrench. Professional multipurpose adjustable wrench Double Scale (mm. and inches.) Reversible jaw for working on pipes IREGA 100% quality assured Length: 311mm Capacity Comparison12 inch IREGA 92WR - 45mm STANDARD ADJUSTABLE WRENCH - 34mm Made in Spain

Check out the Nuke website to see what else they offer and more info https:// nukeperformance.com/ Listing is for: - 1x Wrench The Nuke Performance Adjustable Aluminum AN Wrench AN-4 to AN-16 is a handy and invaluable help when installing all types of connectors and hose ends. With this handy adjust...

8 Inch Adjustable Wrench This professional quality wrench with adjustable jaws offers the best value for money. Triple coated chrome finish (2 Ni 1 Cr) for perfect chrome adherence and maximum rust resistance. Opening: 24.05mm (15/16 inch)Length: 206mm Made in Spain Manufactured according to the mos...

6 Inch Adjustable Wrench This professional quality wrench with adjustable jaws offers the best value for money. Triple coated chrome finish (2 Ni 1 Cr) for perfect chrome adherence and maximum rust resistance. Opening: 19.2mm (3/4 inch)Length: 160mm Made in Spain Manufactured according to the most s...

10 Inch Adjustable Wrench This professional quality wrench with adjustable jaws offers the best value for money. Triple coated chrome finish (2 Ni 1 Cr) for perfect chrome adherence and maximum rust resistance. Opening: 29mm (1.1/8 inch)Length: 257mm Made in Spain Manufactured according to the most ...

STUBBY ADJUSTABLE WRENCH 6.5,165mm Excellent Quality Great Gift Idea FEATURES: Max Opening: 30mm (the same as ISO6787 -10) Made of CrV Steel Chrome Finish Two-Component Plastic Handle Packing: Blister Hanger

Powerbuilt 610mm/24" Adjustable Wrench. WES5012 Jaw opening: 63mm Built to exceed ANSI specifications Drop forged, chrome vanadium steel Features the Euro Design type handle for greater comfort at higher torque applications with positive grip and balance Features a metric scale on jaw for easy fastener size identification

Powerbuilt 100mm/4" Adjustable Wrench. 944039HS Jaw opening: 15mm Built to exceed ANSI specifications Drop forged, chrome vanadium steel Features the Euro Design type handle for greater comfort at higher torque applications with positive grip and balance Features a metric scale on jaw for easy fastener size identification

Universal adjustable wrench for AN hose fittings. AN3-AN12 Anodized alloy