Discover more like Krieghoff Stock 5 Wrench

2.5mm hex wrench to adjust your K-80 adjustable comb. T-handle and plated shaft. Measures: 125mm Length An essential accessory if you have an adjustable comb. Other Krieghoff Wrenches Available: - Stock Removal Wrench (5mm Hex) - Trigger and Selector Locking Wrench (1.27mm Hex) - Trap Special/Pro Ri...

This wrench is 1.27mm, 0.050", and is the correct size to adjust the trigger position on your K-80 or K-20. The same wrench locks and unlocks the barrel selector. Please note: When adjusting the trigger position you must also loosen the front selector locking screw in the trigger blade. This is beca...

On all K-80 guns the safety catch can be locked in the forward, off, position. This is intended for competition use only as the gun not closed until safely on the firing point. To lock the safety you need to first remove the stock. The locking screw is located on the right-hand side of the top strap...

This is a 1.5mm Hex Wrench used to loosen and tighten the adjustment wheel on the K-80 Trap Special Barrels and also the K-80 Pro Rib Barrels. You start by slacking the locking screw to allow the wheel to be turned. Then use the wheel to adjustable the height of the rib. Then tighten the locking scr...

The Krieghoff K-80 Speed Wrench for KTW Thinwall Chokes - For Parcours Parcours-X Thinwall Chokes This wrench fits the Krieghoff KTW Thinwall Choke Tubes especially for the Parcours and Parcours-X Barrels. The plastic section inserts into the choke for a firm fit. Then the teeth on the wrench fit di...

Krieghoff Speed choke wrench, foldable, for Krieghoff factory chokes

Three wrenches in One. 20b, 28b and.410g. This wrench is the perfect accessory for the K-20 3 barrel set owner. Flat black ring type spanner wrench fully encloses the choke tube and ensures removal of even the most stubborn choke.

Changing chokes is a breeze with Extreme Chokes proprietary stainless collapsible choke wrench designed specifically for Krieghoff shotguns, featuring split-barrels design. Also our 4 slot 12g Gauge Wrench that fits the Extreme Chokes made for Zoli Kolar, Beretta, Blaser, Browning Perazzi. Change co...

The Krieghoff K-80 Factory Choke Tube Wrench Flat black spanner type wrench to fit all K-80 choke tubes, including black Steel Factory Chokes and all of the Titanium Choke Series including Gold Titanium and Black Titanium. Ring type spanner wrench fully encloses choke tube and ensures removal of even the most stubborn choke.

This is a set that includes one ball and one spring for the newer style K-80 K-20 ejectors. Krieghoff Know How - Removing Replacing the Krieghoff Ejectors Buying or receiving non-prohibited firearms or other items by mail order or through the internet

This is the Pin ONLY for a K-80 12 Gauge Front Hanger (for both Fixed Choke and Choke Tube Hangers). The need for the correct Pin Punch is necessary. Krieghoff Know How - Remove the Front Hanger

The Krieghoff Bead fits all Krieghoff K-80 ribs. with easy attachment to the front using a single screw. The white or orange bead gives you excellent quick alignment with the target and is highly visible even in fading light. Easy fitting using a single screw and small screwdriver. Includes sight and screw. With the exception of some early Trap Models. Krieghoff thread size is 2.5mm (M2.50.45

The original Krieghoff factory choke tubes, designed as a part of the Krieghoff choke system with an extended collar for easy choke identification and removal. Choke tubes can be removed using the original ring wrench. Constrictions for Choke Tubes (12 gauge) Steel Choke Tubes Available: - Cylinder ...

The Krieghoff towel features a centrally hung carabine for hanging just about anywhere. A Microfibre Towel. This medium size towel is lightweight, absorbent and dries fast. Comes in black or red with the Krieghoff logo. Carbine included. Towel Dimensions 40 cm x 60 cm Composition 88% Polyester 12% Nylon Weight 90 g

Krieghoff Thin Wall Chokes (KTW) in the flush-fit 12-gauge. For standard threads (formerly known as "SK" threads) These chokes fit any K-80 "Parcours" version, which already has a thread for interchangeable chokes. Subsequent fitting of thin wall chokes possible for shotgun barrels with fixed chokes...

Description - Shell Pouch made of resistant fabric with leather applications. The Krieghoff logo is embroidered on the front. On the underside of the two inside bags is a hole each rooted to ensure the dripping of water during rainfall.

Krieghoff Basecamp Jacket is showerproof and made from nylon ottoman shell, self coloured anti-pill polar fleece lining. Light blue stripe along top collar. Contrast inside storm flap and contrast piping detailing. Full front zip with Velcro external storm flap. Two zippered front pockets. Draw cord...

Front hanger removal and replacement pin punches. 1.4mm diameter, the correct size to drift out the hanger cross pin without damage. 0.9mm diameter, the correct size to pass up the center of the hollow cross pin to provide support whilst it is replaced. The pin punch is used to drive objects using a...

For Briley choke installation THIS CHOKE WRENCH IS NOT COMPATIBLE WITH KRIEGHOFF THIN WALL CHOKES

Grab its heavy duty handle and off you go. The Ultimate Krieghoff embroidered Ammunition/Cooler holder is the perfect companion for the range or outdoor adventures. 600D polyester Easy, double zip U-shaped access to main compartment 2 handy elastic end mesh pockets for your drink bottle Heavy duty m...

Brand new aftermarket product. In good quality. Made of T6061 aluminum alloy. Color: Black Adjustable Wrench: From -3AN to -12AN Total length: Approx. 17.3cm PACKAGE CONTENTS: 1 x 3AN to 12AN Adjustable Wrench Key words: AN3 Wrench AN4 Wrench AN6 Wrench AN8 Wrench AN10 Wrench AN12 Wrench

Keep your chokes together in a branded, form-fitting case designed by Extreme Chokes. Please note that this case will fit any of our standard length chokes except thin-wall Krieghoff K-80 Parcours, Zoli, Beretta Optima or Optima HP, which are longer. Extreme choke case is only compatible with the fo...

Krieghoff Thin Wall Chokes (KTW) in the flush-fit 12-gauge. For standard threads (formerly known as "SK" threads) These chokes fit any K-80 "Parcours" version, which already has a thread for interchangeable chokes. Subsequent fitting of thin wall chokes possible for shotgun barrels with fixed chokes...