__like Fox Air Cap 32/34 Float NA2

Fox 36 Float NA2 2018-2021 air shaft assembliesUse for repair or travel changeFit F36 Float 2018-2021 forks with NA2 air system and 1.287" (32.7 mm) stanchion ID (except e-bike only shafts which have ID 1.214")The 2021 shafts are longer (bigger negative chamber) than the 2018-20 air shaftsSizes ordered in from supplier upon customer order. Usually available approx 2-3 days lead-time.

Used to rebuild and replace all seals on the Fox 36 air shafts with the NA2 design. - Fits all 36 forks with NA2 air shaft including Factory, Performance Series Elite, Performance Series and Rhythm. - Also fits Marzocchi Bomber Z1 air shaft. - Recommended replacement intervals from Fox = 125 Hours T...

Here's an air can service kit forFox Float shocks from 2006 onwards, including Fox Float X. It contains all of the parts you need for an air can service. This service kit will not work on Fox Float X2 shocks. These seals have reduced friction on the stock kits, we have been impressed. The only other...

Time for a air chamber rebuild look no further we have you covered These rebuild kits work with all the NA2, EVOL and Rhythm Air Springs

Application: 2018 and later Fox 36 mm stanchioned forks (excluding E-bike version), including Fox 36 Rhythm forksAlso fits Marzocchi Z1 2020 forksKit includes o-rings and quad ring for the air springPDF showing contents of kit is available here

Make a good fork a great fork. Introducing the Luftkappe air piston kit forFox Float forks. For full in-depth Information on Vorsprung Luftkappe Installation tools also available Pinkbike: "The Luftkappe's change to the feel of the Lyrik was immediately noticeable on the trail. Traction was increase...

- Seals and parts for a 2022 Fox Float X air sleeve service - Also used to service a Marzocchi Bomber Air sleeve This kit is great for regular maintenance and we would recommend doing new seals in your shock at least once a year if not more. This kit is meant to service your rear shock's air can, not to do a full damper rebuild.

Need to adjust the end stroke ramp up of your Fox Float rear shock Vorsprung AVS (Air Volume Spacer) kits are now available Each Vorsprung AVS kit includes 3 spacers (small, medium and large) that simply snap into place underneath your bottom-out plate inside the air sleeve. They are compatible with...

Kit fits both the below shocks but will have leftover seal depending on your compression adjuster vs climb-switch spec.Identification2016-2018 Fox FLOAT X2 has an air-can outer layer that twists to remove.2019-2020 Fox FLOAT X2 has an air-can outer layer

Shockcraft complete air seal kit to fit Fox Float air shocks from 2000 onward.This kit has been designed for a longer life with tougher seals than factory. We still recommend 25 hour clean and re-lube.The seal kit contains the air shaft seal, air pi

Faux Flo Air Sleeve Kit Shockcraft's complete air seal kit to fit Fox Float air shocks from 2000 onward.This kit has been designed for a longer life. We still recommend 25 hour clean and re-lube.The seal kit contains the air shaft seal, air piston

Vorsprung Luftkappe air piston with higher volume negative Fits 2018 Fox Float 36 Evol Performance Factory Series forks Requires roll pin tool to install

Kit containing everything for servicing your Fox F36 GRIP/GRIP2 forks with NA2 EVOL Air Spring. These forks were built 2018-2020 and have GRIP or GRIP2 dampers which can be tuned or upgraded.Earlier NA2 forks DPA forks cannot use Secus or Luftkappe

Details Faux Flo Air Sleeve Kit Shockcraft's complete air seal kit to fit Fox Float DPX2 air shocks from 2017-2021 onward.This kit has been designed for a longer life. We still recommend 25 hour clean and re-lube.The seal kit contains the ai

Changing volume spacers in the shock is an internal adjustment that allows you to change the amount of mid stroke and bottom out resistance. - If you have set your sag correctly and are using full travel (bottoming out) too easily, then you could install a larger spacer to increase bottom out resist...

What we have here is a refined air sleeve kit providing you with reduced friction to give you better traction at ground and a better overall feel bike and trail Air sleeve kits fit to: - Fox Floatfits: - 2006 on Float Shocks,other than Fox Float X2. - Rockshox Monarch/Monarch Plus fits: - All Rocksh...

Damper air spring seal kit fits both the below shocks but will have leftover seal depending on your compression adjuster vs climb-switch spec.See Related Products for further information on components of this kit.PDF showing contents of damper &

Replacement kit for snapped top out spring. Please note: this will fit all Fox Float Fork that rely on coil negative springs, models from 2006 to 2012 approximately.

Air spring volume spacer for Fox 34 forks Also E bike F36 forks have thicker wall stanchions and use F34 volume spacers Green colour 10 cc volume each Fox Part Code: 234-04-953

Application:9 mm kit fits 2014 Fox Float DPS shocks9.5 mm kit fits 2000-2014 Fox Float shocksBoost valve kit fits 2014 Float CTD Boost Valve ShocksKits include o-rings for the damper.PDFs showing contents of kits:• 9 mm Damper O-ring Kit • 9.5 mm Damper O-ring Kit• 9 mm Damper Boost Valve Seals

- Anti Fog / 100% UV Protection - Fits Fox Air Defence Goggles

Changing volume spacers in the shock is an internal adjustment that allows you to change the amount of mid stroke and bottom out resistance. - If you have set your sag correctly and are using full travel (bottoming out) too easily, then you could install a larger spacer to increase bottom out resist...

The stanchion tube mudguard offers a sleek solution for all 2021 models of Fox Racing Shox 36 Float and 38 Float suspension forks. It securely attaches to the lower tube valves and the triple clamp with a robust 4-point direct mounting system, effectively protecting the stanchions and seals from dus...