Discover more like Hard Race Rear Lower Brace Honda, Jazz/Fit, Gk3/4/5/6

Features: - Enhance body rigidity - Providing excellent steering response - Improve car handling and stability - Ready to install, easy bolt on installation Note: - For FIT HYBRID 3rd GP5 use only - Connecting between control arm - 1 PCS/SET

Features: - Reduces body roll - Enhance body rigidity - Providing excellent steering response - Ready to install, easy bolt on installation - 3D design processing Note: 1 PCS/SET

Features: - Enhance body rigidity - Providing excellent steering response - Improve car handling and stability - Ready to install, easy bolt on installation Note: - Connecting between control arm - 1 PCS/SET

HARDRACE is proud to announce the new front middle brace for HONDA FIT GK. The brace is designed to improve handling and chassis rigidity. Features: - Reduce the flex of the vehicle chassis - Improving the stiffness - Made of superior quality steel, provides more strength Note: - Behind the front sub-frame - 1 PCS/SET

HARDRACE Front Fender Brace are designed to stiffen up the chassis and reduce vehicle chassis flex. This will increase the rigidity of your car during high speed driving and hard cornering. This is why HARDRACE Front Fender Brace can maximizes the performance of the suspension and brings better hand...

Harden rubber bushing made with high strength and anti-crack rubber material, solid steering response and driving suspension feel, resist side inclined while cornering at high speed maneuvers. Features: - Reduces vibration - Provides stability - Increase steering response - OEM direct replacement - ...

Harden rubber bushing made with high strength and anti-crack rubber material, solid steering response and driving suspension feel, resist side inclined while cornering at high speed maneuvers. Features: - Reduces vibration - Provides stability - Increase steering response - OEM direct replacement - Regular greasing not required - No noise or squeaks Note: Harden Rubber Equipped. 2 PCS/SET

Sway Bar affects the handling and the cars over steer and under steer. It ties the lower suspension links together across the front or back, will keep your car flat in turns instead of leaning over to one side. Hardrace sway bars provide better control especially at high speeds cornering. Features: ...

By installing the HARDRACE Roll-Center Adjusters, it will correct the suspension geometry of a lowered car, putting the control arms back closer to its original position, resulting in increased steering response and stability while eliminating bump steer. Features: - Decreases body roll - Improves t...

Pillow ball bushing provides excellent driver feedback, precise control and solid suspension feel. Inner bushing is made accurately with both high molecule plastic tube and specific metal alloy. High durability and reliability. Outer bushing is combined by TPV material anti-dust boot, 100% resistant...

Type Lower Arm Brace, Vendor Carbing, This is a pair of rear lower arm braces to fit a Honda Integra 2002 to 2006 DC5 models.Shown in pictures how they fit on car.Were rusty when removed from car, were stripped of paint and rust and repainted.Two braces:Carbing brace will fit Type-R and Non-Type-RCustom brace will only fit.

Type Strut Brace, Vendor Non-Branded, This is a aftermarket rear strut brace to fit Honda Prelude 1997 to 2001 BB5-9 models.Has an extra hole drilled on left end, and edge has been ground down.Please see our ABOUT page for terms and conditions of sale.If you are not sure this part will fit your Honda please.

Allow 2 weeks for order processing/manufacturing for all special order Hasport products Additional Information: Weight 12 lbs Dimensions 10 6 4 in Urethane U62A (Street), U70A (Race), U88A (Most Race), U94A (Most Extreme Race

Availability: 4 in stock

Type Tail Lamp Fit Vendor Doov This is a set Doovof silver Tail Lamp covers fit Honda Jazz/Fit 2002 2008 GD models.Please see our ABOUT page for terms and conditions of sale.If you are not sure this part will fit your Honda us and we will be happy answer your questions.

OEM factory front lower chassis brace bracket, as removed from a DC5 chassis Honda Integra Type R, years 2002 - 2006. This mounts to the chassis rails in front of the steering rack and holds the heat shield for the exhaust headers. Condition: Good used condition as pictured. For warranty terms and c...

HARDRACE camber kit reduces tire wear and increase tire durable. Made with superior quality bushing, provide advanced stability and accurate response steering, especially during high speed driving and cornering. Features: - One-piece, OE design - Camber adjustment - Provides stability - Assists to r...

Price for one

Dimensions 12 6 6 in

Dimensions 12 6 6 in

GPX 3.5 Neck Brace Junior Description The Leatt GPX 3.5 Junior neck brace has the same features as the adult version just made specially for smaller riders, it is lightweight, has an adjustable rear thoracic and is super stylish, this makes the 3.5 a great buy. The brace is designed to allow the for...

Type Rear Skirt, Vendor Non-Branded, This is a rear bumper skirt to fit a Honda Stream 2002 to 2004 RN1-5 models.In condition with just mild scratches.Please see our ABOUT page for terms and conditions of sale.If you are not sure this part will fit your Honda us and we will be happy.

OEM factory rear alloy floor beam or brace which mounts between the B pillars just under the rear seat, as removed from a Japanese import DC5 chassis Honda Integra Type R, years 2002 - 2006. Condition: Good used condition as pictured. Items are usually sent within 24 hours of payment, we are located...