Discover more like JDM Honda DC5 Integra Type R Front Lower Chassis Brace Bracket 02-06

OEM factory rear seats, as removed from a Japanese import DC5 chassis Honda Integra Type R, years 2002 - 2006. Condition: Good used condition as pictured, there is some fading to the top of the seats, there is also a strand of fabric that has been pulled on the base as shown in photo 6.

OEM factory left side or passengers window regulator and motor, as removed from a right hand drive (RHD) Japanese import DC5 chassis Honda Integra Type R, years 2002 - 2006. Condition: ConditionDescription For warranty terms and conditions please see the Warranty Info For all other information including delivery and handling times please see the FAQs or at the details below

OEM factory rear alloy floor beam or brace which mounts between the B pillars just under the rear seat, as removed from a Japanese import DC5 chassis Honda Integra Type R, years 2002 - 2006. Condition: Good used condition as pictured. Items are usually sent within 24 hours of payment, we are located...

OEM factory 17x4 inch alloy spare wheel tire, as removed from a Japanese import DC5 Chassis Honda Integra Type R years 2002 - 2006. Suited to clear the Type-R factory Brembo brakes. Condition: ConditionDescription For warranty terms and conditions please see the Warranty Info For all other information including delivery and handling times please see the FAQs or at the details below

OEM factory alloy wheel centre caps, removed from a Japanese import DC5 chassis Honda Integra Type R, years 2002 - 2006. Condition: Good used condition as pictured, the H logo on the caps has moved or is bubbling in some places. Items are usually sent within 24 hours of payment, we are located in Ne...

OEM factory interior door sill scuff or kick plates, as removed from a Japanese import DC5 chassis Honda Integra Type R, years 2002 - 2006. Condition: Very good used condition as pictured. There are a couple of light surface scratches including one above the "N" on the plate as shown in photo 5. Ite...

OEM factory rear boot / trunk INTEGRA and TYPE R badge set, removed from a Japanese import DC5 chassis Honda Integra Type R, years 2001 - 2006. Condition: Good used condition as pictured. The alignment pins on both badges are snapped but they will install fine with double sided foam tape. Items are ...

OEM factory rear hatch tailgate lock assembly, as removed from a Honda Integra DC5, years 2004 -2006. Please note: This was removed from a right hand drive Japanese DC5. Condition: Good used condition as pictured. Items are usually sent within 24 hours of payment; we are located in New Zealand. Cour...

OEM factory powerfolding mirrors, as removed from a Honda Integra DC5, years 2001 -2006. Please note: these mirrors suit right hand drive (RHD) vehicles only as the viewing angles are different to LHD. This listing is for a pair of mirrors only, NO switch is included. Condition: Good used condition ...

This auction is for the pictured single factory alloy wheel as removed from a DC5 chassis Honda Integra Type R, years 2001 - 2006. 17x7 inch 60 offset or ET60 64mm center bore No load rating as it is a factory wheel 5x114.3 stud pattern or PCD Condition: There is curbing to the face of wheel as shown in the photos. Wheel has been spun on our wheel balancer and is free from buckles and wobbles.

Type Lower Arm Brace, Vendor Carbing, This is a pair of rear lower arm braces to fit a Honda Integra 2002 to 2006 DC5 models.Shown in pictures how they fit on car.Were rusty when removed from car, were stripped of paint and rust and repainted.Two braces:Carbing brace will fit Type-R and Non-Type-RCustom brace will only fit.

OEM factory genuine Stanley (made in Japan) left and right side marker pair, as removed from a EG chassis Honda Civic, years 1992 - 1995. These also suit the below vehicles; - EG, EJ Honda Civic 1992 - 1995 - EG Honda CR-X Delsol 1992 - 1998 - DC, DB Honda Integra 1992 - 2001 These are also known as...

SPECIAL OFFER Add 1 of our JDM themed caps to to each JDM Honda Integra tee purchased and get 25% off the cap.. Quality AS Colour Black Staple tee with JDM Honda Integra screen printed design front and back. - Regular fit - Crew neck - Mid weight, 180 GSM, 28-singles - 100% combed cotton - Neck ribbing, side seamed, shoulder to shoulder tape, double needle hems, preshrunk to minimise shrinkage.

This is a FLUSH fitting rear wiper delete kit for your Honda Integra DC5. Our kit gives you that smooth, clean, OEM deleted finish. We proudly make our kits in house here in the UK. You will receive: 1 X Flush fitting wiper delete plug. 1 X Detailed printed fitting instructions. 1 X 10ml Waterproof ...

Type Badge, Vendor Honda Oem, This is a genuine Type-R badge removed from a DC5 Integra.Will require double sided tape to fit.Please see our ABOUT page for terms and conditions of sale.If you are not sure this part will fit your Honda us and we will be happy to answer your questions.

Aftermarket new ignition switch unit to suit Honda Civic and Honda CRX, years 1984 - 1987. This will also suit: Honda Integra 1985 - 1989 Honda Ballade 1983 - 1986 For warranty terms and conditions please see the Warranty Info For all other information including delivery and handling times please see the FAQs or at the details below

HARDRACE Rear Lower Brace are designed to stiffen up the chassis and reduce vehicle chassis flex. This will increase the rigidity of your car during high speed driving and hard cornering. This is why HARDRACE Rear Lower Brace can maximizes the performance of the suspension and brings better handling...

HARDRACE is proud to announce the new front middle brace for HONDA FIT GK. The brace is designed to improve handling and chassis rigidity. Features: - Reduce the flex of the vehicle chassis - Improving the stiffness - Made of superior quality steel, provides more strength Note: - Behind the front sub-frame - 1 PCS/SET

Black Series Front Strut Tower Bar for Honda Civic Integra ties the vehicles upper suspension points at its shock towers for ultimate chassis strength and rigidity for improved handling performance. Strut Tower Bars are manufactured from ultra-strong and lightweight 6061 aluminum and yield the highe...

Bracket Holder For Front Gearbox Mount On Chassis Type 2 Kombi 1972-1972 Clamps the front forked mount to the chassis

Product Type: Plastic Kitset Brand: Fujimi Scale: 1/24 Scale Requires assembly. Glue and paint sold separately.

Honda Integra Type R design embroidered on quality UFLEX snapback cap. U15608 Fabric: 80% Acrylic, 20% Wool Fabric - Active: 100% Polyester Sizes: One Size Fits All (Snap Back) 2XL size Snap Back is for larger heads. 6 panel structured snap back Pre-curved Peak Double poly snap back enclosure 6 rows...

HONDA CIVIC INTEGRA Uprated Billet Engine Torque Mount Kit EK EG DC Fits 1992-2000 Honda Civic EK EG 1994-2001 Honda Integra DC1 DC2 Will fit with B Series and D series engines