Discover more like Hyundai 5356 Mig 1.2mm 7kg spools Duroweld

AWS A5.10 ER5356 Hyundai 5356 MIG WIRE As the usage of aluminium wire in welding field is increasing; HYUNDAI WELDING is geared to offer a rapid response to clients specific requirements. With constant research and development, our range of aluminium wire will continue to evolve to offer the global ...

AWS A5.10 ER5183 Duralloy 5183 is an Al Mg Mn alloyed welding wire with high tensile and corrosion strength. It is used for welding wrought aluminium alloys is also used for other special welding processes of Aluminium/Manganese, Aluminium/Magnesium, Aluminium/Magnesium/Silicon Aluminium/Zinc alloys...

Hyundai SC-700H is a flux cored wire designed for hardfacing application with 100% CO2 shielding gas. It is highly recommendable to use on wear plate and weld metals hardness should be over Hv 700.

Graphite Liner 1.0-1.2mm 5m Used for feeding soft wires through your Mig gun, Idealy suited to Aluminium Wires

D200 Spool 5356 is considered to be the most commonly used aluminium wire Uses include storage Fuel tanks, boat building, bull bars, automotive general aluminium fabrication Suitable for welding a wide range of cast wrought aluminium alloys Precision layer wound aluminium MIG wire Double diamond shaved MIG wire, ensures smooth feed-ability AWS - A5.10 ER5356

Supercored 71H is a titania flux cored wire for all position welding with high ampere. Its impact value is very good under high heat-input, arc is smooth and slag detachability is excellent - All position welding of shipbuilding, bridges, building and structural fabrication. - Use 100% CO2 gas

AWS A5.20 E71T-11 Gasless Flux Cored Wire is used for light structural, short assembly welds, other general fabrications and galvanized steel fixtures like gates. It is an all position self-shielded flux cored wire designed for single multi-pass welding of thin mild and medium tensile Steel. Available in 0.8mm, 0.9mm, 1.2mm and 1.6mm 5kg and 15kg Spools.

AWS A5.29 E81T1- Ni 1 M H4 Hyundai Supercored 81 is a high tensile all position flux cored wire designed for 100% COshielding. You can get smooth arc, and low spatter, good weldability. Has good bead appearance, slag covering is uniform and easy to remove. For use in construction machinery, bridge structures and storage tanks. 15kg Spool.

AWS A5.18 E70C-6M Hyundai Supercored 70NS is a metal-cored wire which combines the high deposition rates of F.C.W with the high efficiencies of a solid wire, provides exceptionally smooth and stable arc, low spatter and minimal slag coverage. 70NS is used for welding in shipbuilding, machinery, brid...

AWS A5.28 E80C-Ni1 H4 Hyundai Supercored 80ML is the metal cored wire which combines the high deposition rates of a flux cored wire with the high efficiencies of the solid wire. SC-80ML provides an exceptionally smooth and stable arc, low spatter and minimal slag coverage and achieves good impact value to low temperature(-50 ). Use Ar 10-25% CO2 gas

Graphite Liner 1.0-1.2mm 9m Used for feeding soft wires through your Mig gun, Idealy suited to Aluminium Wires

AWS A5.20 E71T-1M/9M Hyundai SC-71LHM Cored is a titania type flux cored wire for all position welding of building, shipbuilding, bridge construction, machinery, and vehicles. It has extra low hydrogen level(H5) and provides an exceptionally smooth and stable arc with a fast freezing slag system. Provides excellent weld-ability with minimal clean up. Use with Argon/C02 Mixed Gas. 15kg Spool

D200 Spool 5356 is considered to be the most commonly used aluminium wire Uses include storage Fuel tanks, boat building, bull bars, automotive general aluminium fabrication Suitable for welding a wide range of cast wrought aluminium alloys Precision layer wound aluminium MIG wire Double diamond shaved MIG wire, ensures smooth feed-ability AWS - A5.10 ER5356

D200 Spool 5356 is considered to be the most commonly used aluminium wire Uses include storage Fuel tanks, boat building, bull bars, automotive general aluminium fabrication Suitable for welding a wide range of cast wrought aluminium alloys Precision layer wound aluminium MIG wire Double diamond shaved MIG wire, ensures smooth feed-ability AWS - A5.10 ER5356

Bossweld 5356 Aluminium Alloy TIG Welding Rods3.2mm Handy Pack (0.45 kg) A5.10 ER5356 5% Mn Tig wire Consistent quality

Weldco Mig Welding Wire - Premium Mig Wire Mild Steel 1.2mm x 15kg (WDC0803) ER 70S-6 Grade For welding with gas co2 or Argon/co2 mix Copper coated to help prevent oxidation Precision wound for smooth feeding

Bossweld 5356 Aluminium Alloy TIG Welding Rods 3.2mm 5Kg - A5.10 ER5356 - 5% Mn Tig wire - Consistent quality

AWS A 5.28: ER80S-G ER80S-G is a Low-alloy copper-coated solid wire with Ni-Cu-Cr additions designed for weather-resistant steel. Thanks to the chemical composition and weld metal mechanical properties it is also used for welding high tensile strength steels. Suitable for the construction of contain...

Bossweld 5356 Aluminium Alloy TIG Welding Rods 2.4mm 5Kg 5356 would be considered the most widely used aluminium TIG rod Consistent quality Applications include bull bars, roll bars, boat building and the welding of many aluminium alloys AWS A5.10 ER 5356 Bossweld 5356 aluminium TIG rod is a 5% magn...

Bossweld 316L stainless steel TIG rods offers excellent resistance to general corrosion from organic and inorganic acids. Metal deposits show good resistance to inter-crystalline corrosion and high temps due to low carbon content. Suitable for a range of stainless steel including: 302, 304, 308, 316, 318, 347, 410 and 410.

Bossweld 316L stainless steel TIG rods offers excellent resistance to general corrosion from organic and inorganic acids. Metal deposits show good resistance to inter-crystalline corrosion and high temps due to low carbon content. Suitable for a range of stainless steel including: 302, 304, 308, 316, 318, 347, 410 and 410.

Availability: Available

Availability: Available