Discover more like Chris King Iso Microspline Conversion Kit

Convert your ISO B rear hub to a SRAM XD compatible driveshell. This conversion kit is complete with axle, adjustment clamp, driveshell and all driveshell internals for a plug and play swap. - Compatible with all SRAM XD cassettes - Compatible with ISO B 148x12mm rear hubs. - Stainless steel bearings.

Convert your ISO, ISO B or ISO Superboost DH rear hub to a Shimano Micro Spline compatible driveshell. Conversion kit is complete with axle, adjustment clamp, driveshell and all driveshell internals for a plug and play swap Features - Compatible with Shimano Micro Spline cassettes; XTR, XT, and SLX ...

Convert your ISO B and Boost 6-Bolt hubs to fit Shimano HG, Micro Spline, or SRAM XD cassettes using our latest technology. Gen 4 conversion kits include a pre-assembled axle, driveshell, and adjusting clamp for a plug and play swap. Installation requires a 2.5mm hex key and T10 Torx tool. Twin bear...

Convert your ISO B and Boost 6-Bolt hubs to fit Shimano HG, Micro Spline, or SRAM XD cassettes using our latest technology. Gen 4 conversion kits include a pre-assembled axle, driveshell, and adjusting clamp for a plug and play swap. Installation requires a 2.5mm hex key and T10 Torx tool. - Twin be...

Convert your ISO 6-Bolt (non-Boost) hubs to fit Shimano HG, Micro Spline, or SRAM XD cassettes using our latest technology. This latest update to our hubs uses a Gen 4 142x12mm axle, adjusting clamp, and a Gen 4 Mountain driver. Gen 4 conversion kits include a pre-assembled axle, driveshell, and adj...

Convert your ISO or ISO B rear hub to a Shimano Micro Spline compatible driveshell. This conversion kit is complete with axle, adjustment clamp, driveshell and all driveshell internals for a plug and play swap. Micro Spline Driveshell Instructions Compatible with Shimano Micro Spline cassettes; XTR, XT, and SLX Compatible with ISO 142x12mm and ISO B 148x12mm rear hubs. Stainless steel bearings.

Convert your ISO 6-Bolt (non-Boost) hubs to fit Shimano HG, Micro Spline, or SRAM XD cassettes using our latest technology. This latest update to our hubs uses a Gen 4 142x12mm axle, adjusting clamp, and a Gen 4 Mountain driver. Gen 4 conversion kits include a pre-assembled axle, driveshell, and adj...

Replacement Ringdrive parts for Chris King rear hubs

Convert your R45D 6 Bolt Gen 2 and R45D Centerlock hubs to fit Shimano HG11, HG12, Micro Spline, or SRAM XDR cassettes with our Gen 4 conversion kit. Gen 4 conversion kits include a pre-assembled axle, driveshell, and updated adjusting clamp for a plug and play swap. Installation requires a 2.5mm he...

Convert your ISO 6-Bolt (non-Boost) hubs to fit Shimano HG, Micro Spline, or SRAM XD cassettes using our latest technology. This latest update to our hubs uses a Gen 4 142x12mm axle, adjusting clamp, and a Gen 4 Mountain driver. Gen 4 conversion kits include a pre-assembled axle, driveshell, and adj...

Convert your R45 hubs to fit Shimano HG11, HG12, Micro Spline, or SRAM XDR cassettes with our Gen 4 conversion kit. Gen 4 conversion kits include a pre-assembled axle, driveshell, adjusting clamp, and QR axle ends for a plug and play swap. Installation requires a 2.5mm hex key and T10 Torx tool. Com...

Various axles and axle upgrade kits, to change your Chris King hubs to work with new frames and forks. Please call for further information on Hub upgrades and other options from Chris King. Identification of Gen 1 and Gen 2 ISO LD hubs: Gen 1 hubs - serial number starts with 171 Gen 2 Hubs - Serial number starts with 172

Various axles and axle upgrade kits, to change your Chris King hubs to work with new frames and forks. Please call for further information on Hub upgrades and other options from Chris King. Identification of Gen 1 and Gen 2 ISO LD hubs: - Gen 1 hubs - serial number starts with 171 - Gen 2 Hubs - Serial number starts with 172

Various axles and axle upgrade kits, to change your Chris King hubs to work with new frames and forks. Please call for further information on Hub upgrades and other options from Chris King. Identification of Gen 1 and Gen 2 ISO LD hubs: - Gen 1 hubs - serial number starts with 171 - Gen 2 Hubs - Serial number starts with 172

Convert your R45D 6 Bolt Gen 2 and R45D Centerlock hubs to fit Shimano HG11, HG12, Micro Spline, or SRAM XDR cassettes with our Gen 4 conversion kit. Gen 4 conversion kits include a pre-assembled axle, driveshell, and updated adjusting clamp for a plug and play swap. Installation requires a 2.5mm he...

Convert your R45 hubs to fit Shimano HG11, HG12, Micro Spline, or SRAM XDR cassettes with our Gen 4 conversion kit. Gen 4 conversion kits include a pre-assembled axle, driveshell, adjusting clamp, and QR axle ends for a plug and play swap. Installation requires a 2.5mm hex key and T10 Torx tool. - C...

Our ThreadFit 24 bottom brackets are designed and built to be durable, serviceable, and silent. Manufactured to create a precise and functional interface between your frames bottom bracket shell and your 24mm cranks, our ThreadFIt 24 bottom brackets ensure that your cranks will spin lightly and with...

Our ThreadFit 24 bottom brackets are designed and built to be durable, serviceable, and silent. Manufactured to create a precise and functional interface between your frames bottom bracket shell and your 24mm cranks, our ThreadFIt 24 bottom brackets ensure that your cranks will spin lightly and with...

Our ThreadFit 24 bottom brackets are designed and built to be durable, serviceable, and silent. Manufactured to create a precise and functional interface between your frames bottom bracket shell and your 24mm cranks, our ThreadFIt 24 bottom brackets ensure that your cranks will spin lightly and with...

Our ThreadFit 24 bottom brackets are designed and built to be durable, serviceable, and silent. Manufactured to create a precise and functional interface between your frames bottom bracket shell and your 24mm cranks, our ThreadFIt 24 bottom brackets ensure that your cranks will spin lightly and with...

Screw-On Oil Filter Conversion Kit (Includes Filter) Complete For 948/1098cc Engine

Our ThreadFit 24 bottom brackets are designed and built to be durable, serviceable, and silent. Manufactured to create a precise and functional interface between your frames bottom bracket shell and your 24mm cranks, our ThreadFIt 24 bottom brackets ensure that your cranks will spin lightly and with...

PRO70 Mini Hopper Conversion Kit for NZCTA Mini Sparrow target that is now 70mm. Rules and Regulations for the conduct of Clay Target Shooting in New Zealand including the NZCTA Constitution. Last Updated Oct 2023 4.19 Mini targets (DTL). 4.19.1 Mini targets shall be 73mm (plus or minus 4mm) diameter and shall not be more than 57 grams in weight.