Discover more like TRIAD 12MM 49'ER AXLE KIT

This is a conversion kit to put the Triad 49'er wheels onto the MADD Drift 2.0. Simply purchase this kit and the 49'er wheel and use the spacers to ensure a snug fit onto the MADD Gear Drift 2.0 axle. Included: 2 x 57mm spacers 2x 40mm spacers 4 x bearings (ID: 12mm, OD: 23mm

Thru Axle trainer adapter kit for 10mm and 12mm diameter through bolts. The Elite Thru Axle adapter kit makes Elite trainers compatible with bicycles with 10mm to 12mm diameter through bolts on the rear wheel (lengths from 130mm to 148mm boost). Easy to setup to start right away with your training, ...

Replacement slicks for the Triad 49'er wheels. Sold as singles, if you need a pair please order 2.

Adaptor for bike with diameter 12mm rear thru-axle and boost width 148mm. Compatible with Drivo, Kura, Turno, Direto, Direto X, Direto XR, Suito, Volano and Turbo Roteo hometrainers.

The Axle assembly to upgrade the Velobike Kickr 17 and Kickr 18, 20, Coreadapters to the new Velobike Through axle system Note: All the new generation Velobike adapterscome with this axle assembly. This is an upgrade kit only. Specifications: Compatible with the early Velobike Kickr 17 and Kickr 18,...

ROBERT AXLE PROJECT TRAINER AXLES Our 12mm Thru Axles for bike trainers adapt your 12mm thru-axle equipped mountain, cross, gravel or road bike to modern bike trainers. No longer do you need a second bike for indoor training or warming up for a race. With our 12 mm Thru Axles for Trainers, you can n...

This kit comes with everything you need to mount most 12x142mm through axle bikes on your KICKR SNAP. It includes 3 sizes, M12 x 1.75 Coarse, M12 x 1.5 Medium and M12 x 1.0 Fine and the end cap.

Increase the spec on your drift trike for less Triad have releases these wheel conversion kits so you can upgrade your current drift trike by just switching out the wheels. The kit comes with wheel spacers to fit most other trikes on the market Specs: Includes: 2 x PP interchangeable slick wheels (w...

Upgraded axles for theMavic Comete wheels, for the use ofMavic wheels in the through axle forks such as the Argon18 TKO and Look T20/895 Framesets. These are aftermarket axles thatimproves the aerodynamics,stiffness and universality of theMavic Comete wheel. The axle kit replaces the stockMavic axle...

Compatible with 12mm rear thru-axles under 180mm in length. Thread pitch: M12 x 1.0 Note: Choose the correct thread pitch, 1.0 / 1.5 / 1.75 mm, to match your thru-axle.

Compatible with 12mm rear thru-axles under 180mm in length. Thread pitch: M12 x 1.5 Note: Choose the correct thread pitch, 1.0 / 1.5 / 1.75 mm, to match your thru-axle.

Compatible with 12mm rear thru-axles under 180mm in length. Thread pitch: M12 x 1.75 Note: Choose the correct thread pitch, 1.0 / 1.5 / 1.75 mm, to match your thru-axle.

Upgraded axles for the Campagnolo Ghibliwheels - developed in collaboration with the Aus Cycling for the use of Campagnolo wheels in the Argon18 Framesets. These are aftermarket axles thatimproves the aerodynamics,stiffness and universality of the Campagnolo Ghibli wheels. The axle kit replaces the ...

, options available: Direct Drive QR Thru-Axle 142x: - Adapters bag (quick release 130-135x5mm and thru axle 142x12mm 2 spacers for 10-11 speed cassette, E5 Key of L=77mm, Right Adapter L=130-135mm) for Direct Drive hometrainers, (it is not compatible with Suito, Direto XR, Turbo Muin, Real Turbo Mu...

DR71 Roller with SS 15mm Long Axle Weight Rating 50kgs DR71 No Axle Roller without Axle Weight Rating 50kgs DR71 Short Axle Roller with SS 12mm Short Axle Weight Rating 50kgs

Rockbros offers the most versatile and cost effective roof mounted bike rack solution This thru-axle adapter kit features one pair of 12x100mm plastic adapters to allow fitment of disc brake bikes on Rockbros roof-top suction rack

This fork accommodates wheels up to 120mm. Comes with the axle as well (not shown in the photo) Also comes with pegs and a rear axle.

COASTER AXLE NUT Steel coaster axle nut 3/8" 24TPI, flanged.

43000159 Required for installation of accessory Front Axle Covers on 19-later FXDRS and 18-later FXFB and FXFBS models. Inverted Forks Kit includes threaded axle spacer, left and right adapters and all hardware FITMENT INFORMATION Required for installation of Front Axle Nut Covers on 18-later FLSB, FXFB and FXFBS, 19-later FXDRS, 20-later FXLRS and 22-later FXLRST models.

SM-IOM1 attaches to the SM-SW1. It is specifically designed to connect to Triad Stands. The Triad-Orbit, Precision AV Atmos Speaker Mount System offers many options for mounting onto walls, ceilings or Triad-Orbit IO. This uniquely designed patent-pending speaker mounting system allows the installer...

Easily convert the Tiny Tot PLUS tricycle into a 2-wheel balance bike. NOTE: This axle is included with every Kinderfeets Tiny Tot PLUS purchase, so there is no need to buy this separately unless you need a replacement. This is designed for rear wheels only.

Free Standard delivery or $5 Rural Surcharge. Trojan offer a range of kits used for piping Hydraulic braking systems. These are available for both single axle tandem axle applications. Stainless steel braided hoses with stainless fittings are also available. Complies with SAE J1401. Single Braked axle kit

High Tensile axle set. For use with most decks Single: Front axle 70mm/2.75" Rear Axle 85mm/3.4" Double: Front axle 85mm/3.4" Rear Axle 105mm/4.1"