Discover more like Bernette Hemmer Foot B37/B38

This special presser foot serves the purpose to create professional-looking seams. It folds the fabric twice which results in a nice rollhem which is then properly fixed by the needle with a straight stitch.

This foot is ideal for patchworking with exact seam allowances of 1/4 and 1/8 inch. The fabric edges can either be guided along the foot or the seam guide. This makes accurate sewing absolutely simple.

This foot is simply perfect to sew in zippers. As the zipper is invisible afterward, an especially elegant look is achieved. Only fits Bernette 37/38

This foot is a true specialist for free motion sewing and it is best suitable to darn holes and worn areas. Used together with an embroidery hoop, the darning process can be simplified as the hoop stabilizes the fabric. The foot can also be used to create attractive embellishing such as laces or monograms. Only fits Bernette 37/38

Difficult-to-work-with fabrics are best sewn using the Walking foot. It supports the fabric feed by a second feed dog on the upper side of the foot. The sewing project is moved simultaneously by the two feed dogs which allow a smooth sewing process.

Presser-Foot Set b37 / b38 Included: - Zigzag Foot with Non-Stick Sole - Hemmer Foot (4mm) - Gathering Foot - Cording Foot - Invisible zipper foot - Patchwork Foot - Straight Stitch Foot - Edgestitch Foot - Ribbon-Couching Foot - Darning- /Embroidery Foot - Booklet

Invisible Zipper Foot B37/B38 This foot is simply perfect to sew in invisible zippers. As the zipper is invisible afterward, an especially elegant look is

This special presser foot serves the purpose to create professional-looking seams. It folds the fabric twice which results in a nice rollhem which is then properly fixed by the needle with a straight stitch. This Bernette foot is compatiable with the Bernette 33 and 35

Presser foot set for the Bernette Overlocker (serger) and the Bernette Overlocker/Coverstitch Combi machines. Binder Attachment for unfolded bias tape Hemmer and Lace Foot Hemmer Foot a) Cording Foot and b) Cording guide Standard Presser Foot with Clear Sole Lace Foot Belt-Loop Foot Booklet

Do you want to quilt more with your bernette sewing machine Add decorative stitches, sew smoothly on leather material and so much more, feel free and be creative with the feet in this set With an accompanying instructional booklet, this quilting set for sewing machines b37 and b38 contains the follo...

This special presser foot serves the purpose to create professional-looking seams. It folds the fabric twice which results in a nice rollhem which is then properly fixed by the needle with a straight stitch.

Free-motion embroidery foot b37/b38 The open embroidery sole offers a clear view of the embroidery area. Precise, creative free-motion works such as

The Piping foot with 2 grooves is suited ideally to create and sew in braids. That gives main points to home furnishing or garments. It is also possible to sew on two cords simultaneously.

Looking for additional accessory feet for your bernette sewing machine Sewing in an invisible zipper foot, decorate with yarns or gather fabric easily are only a few examples, which you can do with the feet in this set. - Zigzag Foot with Non-Stick Sole - Hemmer Foot (4mm) - Gathering Foot - Cording...

Pintuck foot with grooves is used when sewing pintucks with a double needle. The grooves enable you to sew parallel tucks.

This special presser foot serves the purpose to create professional-looking seams. It folds the fabric twice which results in a nice rollhem which is then properly fixed by the needle with a straight stitch. The hemmer foot for Dual Feed is provided with a recess on the back side of the presser foot to activate &hellip

This presser foot with guide facilitates the topstitching of edges, hems and pleats; helpful for sewing on lace or tapes, and for reinforcing edges. The guide helps you achieve flawless seams and hems that run parallel to the edge. This Bernette Hemmer foot fits on all models except the following: b33,35,37,38,70,77 and 79

Sturdy sew table to fit a Bernette b37 or a Bernette b38 sewing machine

Included: Gathering Foot Open Embroidery Foot for Dual Transport Patchwork Foot for Dual Transport Straight Stitch Foot for Dual Transport Hemmer Foot for Dual Transport Cording Foot for Dual Transport Zigzag Foot with Non-Stick Sole Invisible Zipper Foot Booklet

Looking for additional accessory feet for your bernette sewing machine Sewing in an invisible zipper foot, decorate with yarns or gather fabric easily are only a few examples, which you can do with the feet in this set.

This foot is ideal for patch working with exact seam allowances of 1/4 and 1/8 inch. The patchwork foot for Dual Feed is provided with a recess on the back side of the presser foot to activate the integrated Dual Feed. This allows an even feed of several fabric layers and sticky" materials such as leather or plastic.

For creative work with beaded or sequined ribbons. The groove in the middle of the foot serves as a guide for sewing on cords, bead and sequin ribbons. Notice for bernette 77/79 To use this product with your b77/b79, the Universal Presser Foot Holder is required. Visit the product page to learn more. https:// bernette.com/en-NZ/accessories/universal-presser-foot-holder

This foot is ideal to sew along a plexiglass ruler. Note: When using this presser foot make sure the 2mm reduction is active in the sewing settings hovering height. You can also adjust the presser foot height by reducing the presser foot pressure below 0. Lower the feed dog and use without dual feed. &hellip