Discover more like Bernette Binder Attachment For Pre-Folded Bias Tape B33/35

The Binder Attachment serves to bind edges with pre-folded bias tape in a finished width of 5 to 7 mm, which are sewn with a standard or decorative stitch. Compatiable with all Bernette models except; Bernette 33,35,37,38,70,77 and 79

The Binder Attachment serves to bind edges with pre-folded bias tape in a finished width of 5 to 7 mm, which are sewn with a standard or decorative stitch. Only fits bernette 37/38

Bernette Binder Attachment for b42/b44 Binder attachment # 88 for unfolded bias tape is ideal for bias-binding fabric edges. The unfolded tape is fed

Binder Foot #95 For beautifully finished edges - The 5.5 mm foot for Binder attachments #87 and #88 - The notch at the side allows closer access to the binder attachment - Two options #95 For 5.5 mm and #95c for 9 mm machines Binder Foot #95 is a special presser foot for use in conjunction with bind...

This special presser foot serves the purpose to create professional-looking seams. It folds the fabric twice which results in a nice rollhem which is then properly fixed by the needle with a straight stitch. This Bernette foot is compatiable with the Bernette 33 and 35

The binder foot is used to apply pre-folded bias binding tape or bias tape you have cut yourself to the edge of fabric in one easy step. It is equipped with a small funnel to fold and guide the binding over the fabric edge before it reaches the needle and can be used with either zigzag or decorative...

Bernette foot pedal Suitable for bernette b33 and b35 sewing machines

Bernette Invisible-zipper foot b33/b35 This foot is for bernette 33 and bernette 35 Sewing Machines. This foot is simply perfect to sew in invisible zippers. The zip becomes part of the seamline creating an especially elegant look to your garment.

Bernette bobbin case to fit the Bernette 33 35 models only

Presser-Foot Set b33 / b35 Included: - Zigzag Foot with Non-Stick Sole - Overlock Foot - Gathering Foot - Cording Foot - Invisible zipper foot - Patchwork Foot - Straight Stitch Foot - Open Embroidery Foot - Embroidery Foot - Darning-/embroidery foot - Booklet

Instructions - Cut the fabric into strips diagonally (45 angle) for hem finishing, vertical or horizontal for tape cloth handicraft - Insert the fabric through the Tape Maker - Pin the fabric edges then iron the folded tape as you pull the Tape Maker Available in 5 sizes: - Bias Tape Maker (1/4in., ...

This foot is ideal for patchworking with exact seam allowances of 1/4 and 1/8 inch. The fabric edges can either be guided along the foot or the seam guide. This makes accurate sewing absolutely simple.

Pre-folded Iron On Bias Tape. Eliminate time making and pinning in place. Excellent for use in stained glass quilting, Celtic, applique work of project requiring the use of 1/4 inch bias tape. 100% polyester. Washable when sewn in place. Contains eleven yards of 1/4 inch wide tape

This finger guard fits on the bernette sew go1,3 and b33/35/37/38 and possibly on older bernette models. This is a great extra saftey measure to those that are scared of sewing or pricking themself with the needle. Great accessory to add on to your machine for beginner sewers.

Difficult-to-work-with fabrics are best sewn using the Walking foot. It supports the fabric feed by a second feed dog on the upper side of the foot. The sewing project is moved simultaneously by the two feed dogs which allow a smooth sewing process.

This presser foot with guide facilitates the topstitching of edges, hems and pleats; helpful for sewing on lace or tapes, and for reinforcing edges. The guide helps you achieve flawless seams and hems that run parallel to the edge. This Bernette Hemmer foot fits on all models except the following: b33,35,37,38,70,77 and 79

For models: - bernette Milan 2/bernette 2055 - bernette Milan 3/ bernette 2056 - bernette Milan 5/bernette 2066 - bernette Milan 7/bernette 2082e - bernette Milan 8/bernette 2092c

Darning Foot B33/B35 This foot is a true specialist for free motion sewing and it is best suitable to darn holes and worn areas. Used together with an

The straight-stitch foot is ideally suited for all straight-stitch work. The small stitch hole supports the material during sewing. Not suitable for the b33,35,37,38,77,79

This Bias Tape Maker will make the task of creating bias tapes much easier with a fabulous looking result. You can create your own bias tapes to perfectly match your crafty or dressmaking projects. This is a great tool for quilting, dress making, bunting and much more

This Bias Binder Foot is used for easily attaching bias binding to any dressmaking or crafty project. This foot will fold, feed, flatten and stitch your binding for you. Please note: this foot is a snap-on design and requires a snap-on adapter to fit onto your machine.

The universal presser foot holder features an adapted shaft which is fitted in place of the shaft for the Dual Feed. For our bernette machines with Dual Feed, such as the b77 and b79, it is now possible to fit even more sewing feet than those that are already available. Creative touches such as deco...

Open Embroidery Foot B33/B35 This foot makes quick work of appliqus and embroidery projects, as well as the sewing over of lines and patterns. The open