Discover more like Haltech Dual Switch Panel Kit

12 Position Rotary Trim Module - (Boost/Fuel/Ign ) Triple Switch Panel Only - includes Yellow Red knobs Includes: Triple panel, yellow and red adjustment knobs and 3 x 12 position rotary trim modules.

Here is the bulk hardware (including cabling) The stainless battery holder is a custom fit, mounting in the right hand rear corner of the ST3 hull. The dual battery switch has the facility to combine both batteries in an emergency with the ASR changing the main battery as priority. Kit includes 1 x ...

Here is the bulk hardware (including cabling) The stainless battery holder is a custom fit, mounting in the right hand rear corner of the ST3 hull. The dual battery switch has the facility to combine both batteries in an emergency with the ASR changing the main battery as priority. Kit includes 1 x ...

CO2 Boost Control Dual Solenoid Pressure Sensor Kit Includes: Two 3 port 33Hz boost control solenoid kits, 150 PSI "TI" wastegate pressure sensor with -4 AN adaptor and "T" fitting.

Size: 250mm x 500mm (10" x 20") Suits: Haltech iC-7 Display Dash Includes: 1 x iC-7 Moulded Panel Mount- Black Notes: Suits Haltech IC-7 Display Dash Panel is textured. Made from UV stabilised ABS Plastic

Suits: Nexus R3 VCU Nexus S3 ECU Nexus S2 ECU Includes: - 1 x Mounting Plate - 2 x 41.275mm (1.625") Tube Clamps Notes: Brackets are made from CNC machined 6061 Aluminum and then anodized for a durable black finish.

Suits: Haltech uC-10 Display Dash Includes: 1 x uC-10 Moulded Panel Mount- Black Notes: Suits Haltech uC-10 Display Dash Panel is textured. Made from UV stabilised ABS Plastic.

Suits: Nexus R3 VCU Nexus S3 ECU Nexus S2 ECU Includes: - 1 x Mounting Plate - 2 x 31.75mm (1.25") Tube Clamps Notes: Brackets are made from CNC machined 6061 Aluminum and then anodised for a durable black finish.

Ideal for dedicated race cars, engine swaps and custom wiring jobs. The Universal Wire-in Harness has a set of VCU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are colour coded and clearly labelled. Connect your Haltech VCU to the terminated end an...

Very cool 8 Way Touch Switch Panel is the perfect addition to commercial vehicles, 4WDs, caravans or boats. Specs - Control up to 8 different auxiliary lighting or electrical devices. The stylish Thunder 8 Way Touch Switch panel allows the user to control the switching of up to 8 electrical devices ...

This kit enables the wireless control of lighting, fans, and other loads over long distances or through concrete and steel. Just connect the switch module to a conventional switch mechanism and wire in the receiver to the load. The transmitters are digitally paired to the receiver which can switch l...

.00 exc. GST 287913 Switch (On Off) KIT, REPAIR, FILTER BOARD, 240V: 240V repair kit with on/off switch for filter board. 5 in stock

The Haltech CAN Keypad is a plug and play control solution for your Haltech system. With soft touch, ergonomically designed buttons, the Haltech CAN Keypad is easy to use and simple to configure. Suits: NEXUS and Elite devices only Includes: 1 x 8 button keypad (2x4), 1 x Adaptor Harness DT-4 to DTM...

Suits: NTK Sensor Includes: Single Channel, CAN Wideband Controller, NTK Sensor, CAN Cable (4'/1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. Notes: Best product for methanol-powered vehicles Compatible with Nexus and Elite products on NSP only

With soft touch, ergonomically designed buttons, the Haltech CAN Keypad is easy to use and simple to configure. The Haltech CAN Keypad is a plug and play control solution for your Haltech system. Suits: NEXUS and Elite devices only Includes: 1 x 15 Button Keypad (3x5), 1 x Adaptor Harness DT-4 to DT...

Suits: Bosch LSU 4.9 Sensor Includes: Single Channel, CAN Wideband Controller, 4.9LSU Sensor, CAN Cable (4'/1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. Notes: The ideal CAN expansion accessory for all Elite Series ECUs.

Fill Rite KIT120SW switch lever repair kit for FR1200 pumps KIT120SW replacement switch level kit for: FR1200, FR2400, FR4200, FR4400, FR600, SD1200, and SD600 series pumps Kit includes switch lever and locking nut

3.5 GPM PUMP KIT 13 l/min (35 GPM) wash down kit conveniently includes a high capacity Aqua Jet WD 3.5, 5 bar (70 psi). 5.2 GPM PUMP KIT 20 l/min (5.2 GPM) wash down kit conveniently includes a high capacity Aqua Jet WD 5.2, 5 bar (70 psi). PUMProtector inlet strainer, spray nozzle, bulk head fittin...

Plug and Pins Only 24 Pin TYCO As supplied this product is direct Plug n Play compatible with an Elite ECU CAN port, Elite ECU Harness CAN connector or multiple CAN device installation using an Elite 4 Port CAN HUB. If you are connecting this product with a Platinum Pro Plug-in, Sport or Sprint ECU ...

Simplify wiring jobs or add smart control with this kit. Creates a virtual wire between the light switch and the lights. Surface Mount Light Switch Kit comes with Wireless Surface Mount Switch(es) (transmitter) and Controller (receiver). All switches in this pack will only operate the included contr...

Part Number: RTS-DHN-BKHQ RTS Weld-On Axle Housing Bracket kits The RTS Rear Axle Diff Housing Weld-On Bracket Kit is designed for high-performance applications, providing enhanced strength and durability for your rear axle Housing to Bolt into you GM Applications. This kit includes precision-engine...

Simplify wiring jobs or add smart control with this kit. Creates a virtual wire between the light switch and the lights. Surface Mount Light Switch Kit comes with Wireless Surface Mount Switch(es) (transmitter) and Controller (receiver). All switches in this pack will only operate the included contr...

Part Number: RTS-DHN-BKLH RTS Weld-On Axle Housing Bracket kits The RTS Rear Axle Diff Housing Weld-On Bracket Kit is designed for high-performance applications, providing enhanced strength and durability for your rear axle Housing to Bolt into you GM Applications. This kit includes precision-engine...