Discover more like Gas Strut Heavy Duty Angle Bracket Stainless Steel 250kg

Stainless Steel Fits Gas Struts from 8mm - 14mm Rods 250kg load rating

316 Stainless Steel Drill hole out to 10mm if necessary

Re-gas service available Adjustable for less pressure Supplied with right angle stainless steel ball joints Supplied with instruction sheet and allen key (for reducing gas strut pressure

Re-gas service available Adjustable for less pressure Supplied with right angle stainless steel ball joints Supplied with instruction sheet and allen key (for reducing gas strut pressure

Re-gas service available Adjustable for less pressure Supplied with right angle stainless steel ball joints Supplied with instruction sheet and allen key (for reducing gas strut pressure

Height of door (R) 2 = approximate extended length. However if the door width exceeds 1.5m then the height of the door x 0.7 equals the approximate extended length. Increase dimension P if door needs to be less than 90 Decrease dimension P if door needs to be more than 90 Adjustable for less pressur...

Re-gas service available Adjustable for less pressure Supplied with right angle stainless steel ball joints Supplied with instruction sheet and allen key (for reducing gas strut pressure

Gas Strut Safety Sleeve for 1852 Unscrew end of matching strut and install Push sleeve to release strut Prevents gas strut from unintentional closing Black Powdercoated Steel A=145mm B=165mm D=6mm Dimensions Listed on Diagram Does not include Gas Strut

Gas Strut Safety Sleeve for 1851 Unscrew end of matching strut and install Push sleeve to release strut Prevents gas strut from unintentional closing Black Powdercoated Steel A=95mm B=115mm D=6mm Dimensions Listed on Diagram Does not include Gas Strut

Gas Strut Safety Sleeve for 1853 Unscrew end of matching strut and install Push sleeve to release strut Prevents gas strut from unintentional closing Black Powdercoated Steel A=195mm B=215mm D=6mm Dimensions Listed on Diagram Does not include Gas Strut

Gas Strut Safety Sleeve for 1857 Unscrew end of matching strut and install Push sleeve to release strut Prevents gas strut from unintentional closing Black Powdercoated Steel A=495mm B=515mm D=10mm Dimensions Listed on Diagram Does not include Gas Strut

Gas Strut Safety Sleeve for 1856 Unscrew end of matching strut and install Push sleeve to release strut Prevents gas strut from unintentional closing Black Powdercoated Steel A=395mm B=415mm D=8mm Dimensions Listed on Diagram Does not include Gas Strut

Gas Strut Safety Sleeve for 1855 Unscrew end of matching strut and install Push sleeve to release strut Prevents gas strut from unintentional closing Black Powdercoated Steel A=295mm B=315mm D=8mm Dimensions Listed on Diagram Does not include Gas Strut

Gas Strut Safety Sleeve for 1854 Unscrew end of matching strut and install Push sleeve to release strut Prevents gas strut from unintentional closing Black Powdercoated Steel A=245mm B=265mm D=6mm Dimensions Listed on Diagram Does not include Gas Strut

The GME MB042 Heavy Duty Fold Down Bracket in Stainless Steel lets you lower GME UHF CB antennas antennas effortlessly for low-clearance access.

Gas Strut 8mm Shaft Shroud Set Protects the gas strut shaft from contamination and eliminates pinch points, making it safer Stainless steel tube Cut the tube to suit your gas strut stroke and slide the shroud over the shaft (cut to length so that the shroud covers end of barrel by 30mm) 308mm overal...

Gas Strut 10mm Shaft Shroud Set Protects the gas strut shaft from contamination and eliminates pinch points, making it safer Stainless steel tube Cut the tube to suit your gas strut stroke and slide the shroud over the shaft (cut to length so that the shroud covers end of barrel by 30mm) 458mm overa...

Gas Strut 10mm Shaft Shroud Set 32mm Protects the gas strut shaft from contamination and eliminates pinch points, making it safer Stainless steel tube Cut the tube to suit your gas strut stroke and slide the shroud over the shaft (cut to length so that the shroud covers end of barrel by 30mm) 450mm ...

For attaching to fences that do not have capping on top of the fence. Suitable for Timber Paling Fences, Metal Fences and Hardie Fences. Stainless Steel Brackets with pre-drilled holes. These brackets are an optional accessory to use with our Colorbond Metal Fence Brackets. Fixing screws are included.

For attaching to fences that do not have capping on top of the fence. Suitable for Timber Fences, Metal Fences and Hardie Fences. Stainless Steel Brackets with pre-drilled holes. These brackets are an optional accessory to use with our Colorbond Metal Fence Brackets. Fixing screws are included.

Durable and rugged Antenna mounting hardware \n \nAntenna bracket to suit mounting on a bull bar at right angle (MB408SS Style) \n \n - 3 mm Stainless Steel \n

Mounting Bracket for 5005 300kg load rating per bracket We recommend 3 brackets for each 1500mm slide

Zinc Plated ball socket Re-gas service available Height of door (R) 2 = approximate extended length Increase dimension P if door needs to be less than 90 Decrease dimension P if door needs to be more than 90 Adjustable for less pressure Supplied with right angle ball joints and an M10 thread at each end Supplied with instruction sheet and allen key (for reducing gas strut pressure