Discover more like Roval Boost Conversion Kit – Control SL 29 142+

Convert existing Roval wheels with 142mm or 142 to be used with Boost spacing (110/148mm) suspension forks and frames. Kits include front and rear hub end caps, rotor spacers, and kit-specific rotor bolts. Compatible with select 2013 to 2018 Roval wheels. Choose the appropriate SKU for each wheelset...

The K-EDGE Specialized Roval handlebar mount is the ultimate direct mounting upgrade for Specialized Roval Alpinist, Rapide, and Control Cockpits. Designed to hold your computer without sacrificing the simplicity of a one-piece bar/stem. Compatibility: For Roval Alpinist, Roval Rapide, and Roval Con...

Convert your ISO 6-Bolt (non-Boost) hubs to fit Shimano HG, Micro Spline, or SRAM XD cassettes using our latest technology. This latest update to our hubs uses a Gen 4 142x12mm axle, adjusting clamp, and a Gen 4 Mountain driver. Gen 4 conversion kits include a pre-assembled axle, driveshell, and adj...

Convert your ISO 6-Bolt (non-Boost) hubs to fit Shimano HG, Micro Spline, or SRAM XD cassettes using our latest technology. This latest update to our hubs uses a Gen 4 142x12mm axle, adjusting clamp, and a Gen 4 Mountain driver. Gen 4 conversion kits include a pre-assembled axle, driveshell, and adj...

Convert your ISO B and Boost 6-Bolt hubs to fit Shimano HG, Micro Spline, or SRAM XD cassettes using our latest technology. Gen 4 conversion kits include a pre-assembled axle, driveshell, and adjusting clamp for a plug and play swap. Installation requires a 2.5mm hex key and T10 Torx tool. - Twin be...

Convert your ISO B and Boost 6-Bolt hubs to fit Shimano HG, Micro Spline, or SRAM XD cassettes using our latest technology. Gen 4 conversion kits include a pre-assembled axle, driveshell, and adjusting clamp for a plug and play swap. Installation requires a 2.5mm hex key and T10 Torx tool. Twin bear...

Finding your rhythm can make or break your race. Our Control SL seat post puts you in an ideal position for high-output efforts, and is easily adjusted thanks to the 2-bolt system letting you easily make micro-alignments for that dialed attack positionall while remaining feather light at 180g for XC...

Remote lever, cable shock mounted cable-stop to convert Manitou McLeod to remote compression adjustment Lever included is two position Manitou Part Code: 142-31535-K027

Convert your ISO 6-Bolt (non-Boost) hubs to fit Shimano HG, Micro Spline, or SRAM XD cassettes using our latest technology. This latest update to our hubs uses a Gen 4 142x12mm axle, adjusting clamp, and a Gen 4 Mountain driver. Gen 4 conversion kits include a pre-assembled axle, driveshell, and adj...

PRO70 Mini Hopper Conversion Kit for NZCTA Mini Sparrow target that is now 70mm. Rules and Regulations for the conduct of Clay Target Shooting in New Zealand including the NZCTA Constitution. Last Updated Oct 2023 4.19 Mini targets (DTL). 4.19.1 Mini targets shall be 73mm (plus or minus 4mm) diameter and shall not be more than 57 grams in weight.

Convert your ISO B rear hub to a SRAM XD compatible driveshell. This conversion kit is complete with axle, adjustment clamp, driveshell and all driveshell internals for a plug and play swap. - Compatible with all SRAM XD cassettes - Compatible with ISO B 148x12mm rear hubs. - Stainless steel bearings.

HU5671510 - HURST ROLL/CONTROL INSTALL Part Number: HU5671510 This kit contains brake lines and various brass fittings, connectors, adapters, unions and plugs necessary for an easy installation.

The ultimate BBS (bottom bracket system) conversion tool kit system is now available This new conversion tool kit system takes into account the 3 objectives of a complete toolkit, removing the necessary components from the bicycle, installing the conversion kit components correctly and efficiently a...

STS3421 - LOWER CONTROL ARM KIT 1/2" For Strange Aluminium Struts - 1/2" ID Rod Ends Part Number: STS3421 Application Strange Aluminum Struts Description Lower Control Arm Tube Kit For frame tabs using 1/2" bolts Provides tubing parts to fabricate lower control arms Note Outer A-Arm ends sold separa...

Everything to convert your Slash 2WD Traxxas now offers a complete Low Center-of-Gravity chassis conversion kit for 2WD Slash models. The Low-CG Conversion Kit lowers the chassis, battery, and electronic components to bring all the advantages of a low center of gravity to the 2WD short-course trucks...

Chris King bottom brackets utilize Fit Kits to ensure that cranks mate perfectly with our precision bearings, extend product life, and reduce the potential for noise. Fit Kits will also allow you to use one bottom bracket with a wide array of cranks, if you happen to change your cranks in the future...

Features - 3kg QCC caravan Kit - Includes test point and valve

Convert a shaft loop saddle to Quick Hitch with this conversion kit containing all the parts you need. It includes: S5 Quick Hitch Saddle Shaped Elastic Girth False Belly Band Quick Hitch Safety Straps All Black

Convert your Epsilon arrow rest into a Target version.

Do you need to replace Holden Colorado UCA bush kit for your SPC arms. CalOffroad SPC Adjustable Upper Control Arm Bush Kit feature polyurethane bushes and steel inner sleeves. One kit includes - 4 Cotton Reel Bushes - 4 Crush Tubes - 1 Grease Packet Terms Of Sale CalOffroad offer custom built suspe...

Drape Case Inserts Control Drape Kit insert for Kiwicase - KCTP1200S For Poles, Baseplates Drapes.

Do you need to replace your LandCruiser 200 Series UCA bush kit for your SPC arms. CalOffroad SPC Adjustable Upper Control Arm Bush Kit feature polyurethane bushes and steel inner sleeves. One kit includes - 4 Cotton Reel Bushes - 4 Crush Tubes - 1 Grease Packet Terms Of Sale CalOffroad offer custom...

Do you need to replace your LandCruiser 100 Series UCA bush kit for your SPC arms. CalOffroad SPC Adjustable Upper Control Arm Bush Kit feature polyurethane bushes and steel inner sleeves. One kit includes - 4 Cotton Reel Bushes - 4 Crush Tubes - 1 Grease Packet Terms Of Sale CalOffroad offer custom...