Discover more like Lainer Bladder Kit WP Link 2023+

Bladder Kit 64 mm for all shock absorbers WP link. This model allows to put more quantity of nitrogen, so less overheating and more absorbtion of the holes. Specially designed to replace the standard plastic oil/nitrogen separator that can often break. Application WP Link: - KTM SX-F 250/350/450 201...

Bladder Kit for shock absorbers WP XPlor PDS. Application: - KTM EXC 150/250/300 20172023 - KTM EXCF 250/350/450/500 20172023 - KTM EXC Six Days 250/250F/350F/450F/500F 20172023 - KTM SX 85 20182024 - Husqvarna TC 85 20182024 - GAS GAS MC 85 20212024 Specially designed to replace the standard oil/ni...

Application: - KTM EXC TPI 150/250/300 2024 - KTM EXCF SIX DAYS 250/350/450/500 2024 - KTM EXCF 350/450/500 2024 Specially designed to replace the standard oil/nitrogen separator which, being plastic, is subject to breakage. The kit allows a higher absorption of the holes and less overheating. The B...

Aluminum wrench to dismount the stock WP Link shock reservoir model 2023.

Bladder kit to be applied on the original tank, specifically designed to replace the oil/gas separator. The kit allows for less overheating and greater pothole absorption. The bladder KIT consists of the following parts: - NBR rubber bladder. - Cylinder cap entirely machined from solid in blue anodized ergal. Designed and made by Lainer Suspension Racing.Made in Italy.

Shock Spring to fit WP Link Shocks from 2023 onwards Length 240 mm, Applications: - KTM SX-F 250/350/450 2023 - KTM SX 125/150/250 2023 - HUSQVARNA FC 250/350/450 2023 - HUSQVARNA TC 125/250 2023 MADE IN ITALY

Shock absorber spring for WP Link, sold with aluminum ring adapters. Length 260 mm (250mm for 4.2mm with no rings required) Applications: - KTM SX-F 250/350/450 2012-2022 - KTM SX 125/150/250 2012-2022 - HUSQVARNA FC 250/350/450 2014-2022 - HUSQVARNA TC 125/250 2014-2022 - HUSQVARNA FE 250/350/450/5...

This kit is a great value for money upgrade providing better bottoming control and more front end feel.

Adjuster with 35 clicks in compression for WP AER 43mm fork designed to offer greater adjustment possibilities. Compared to the original register, compression adjustment is added at low speeds. It includes calibration in low and high speed compression. The advantage is that of having a more sustaine...

Pair of fork springs KYB 48 Length.498mm Brushed and polished finish. Application: - YZ 125/250 2022-2023 - YZF 450 2014-2023 - YZF 250 2014-2023 - RMZ 250 2019-2023 - KXF 250 2020-2023 Superior quality MADE IN EUROPE

Please Note This is not a stocked item yet, so this product will be backordered, with a delivery time of approx 3-4 weeks Upgraded Midvalve kit for WP XACT forks Enduro 2024

- Includes 3-pin Deutsch DTM connector kit - Easy to mount via 2 bolt holes. Note that the sensor should be mounted higher than the intake manifold port that the hose connects to. - Compact aluminium enclosure - Mechanical connection via 4mm (3/16) hose connector nipple. - Using Link G4/G4 /G4X ECUs just select the MAP sensor type in PC Link as Link 4 Bar

NZD $35.42 NZD

60mm WP Shock Bladder Upgrade Kit BlackAnodized Aluminium Alloy. Designed with a bigger gas capacity and more oil volume than any bladder kit, in fact its gas capacity is25% larger andallows the shock to hold10% more oilthan our nearest competitor. For you this means: - Less fade from pump up', when...

Kit compression adjuster high and low speed for standard shock absorbers KYB. It replaces the original adjuster which is less sensitive to the interventions. Application: - YZ 125/250 2004-2021 - YZF 250 2014-2024 - YZF 450 2010-2024 - BETA RR Racing 2T 250/300 2024 - BETA RR Racing 4T 350/390/430/4...

Please Note This is not a stocked item yet, so this product will be backordered, with a delivery time of approx 3-4 weeks - KTM EXC 2017-2023 - KTM EXC-F 2017-2023 - KTM EXC Six Days 2017-2023 - KTM XC-W TPI 2017-2023 The Stopper Rebound is installed in the linkage shock bolt on the bikes frame. Its...

LINK Air Temp Sensor (IAT1-8) 101-0045 Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" BSP Thread

Please Note This is not a stocked item yet, so this product will be backordered, with a delivery time of approx 3-4 weeks CRF 450 2021-2023 - CRF 250 2022-2023 The Stopper Rebound is installed in the linkage shock bolt on the bikes frame. Its in fact designed to control the last part of the shock wh...

Please Note This is not a stocked item yet, so this product will be backordered, with a delivery time of approx 3-4 weeks Fork piston kit compression and rebound shims included. Application: Ducati Desert X Thanks to the different oil flow of these pistons, the forks become more progressive and controlled, increasing the adjusters sensitive.

E-Throttle Accelerator Pedal Module - Firewall mounted hanging design - 16degree (~70mm) travel - Redundant dual output potentiometers suitable for use with Electronic throttle bodies - Includes 6 pin mating connector kit Technical Specs: Further details on E-Throttle setup can be found in the PC Link helpfile.

Please Note This is not a stocked item yet, so this product will be backordered, with a delivery time of approx 3-4 weeks Fork piston kit compression and rebound shims included. Application: - Yamaha Tenere 700 Thanks to the different oil flow of these pistons, the forks become more progressive and ...

Please Note This is not a stocked item yet, so this product will be backordered, with a delivery time of approx 3-4 weeks Compression adjuster kit high and low speed for Sachs ZF shock absorbers. It replaces the stock compression adjuster. Application: - BETA RR 2T/4T 2019-2024 - BETA RR Racing 2T/4...

82mm Electronic Throttle Body - 82mm Bore size - Dual potentiometer redundancy - Bosch quality and performance - Includes groove on inlet port flange - Includes mating connector kit Technical Specs: Further details on E-Throttle setup can be found in the PC Link helpfile.