Discover more like Holmenkol basebrush/nylon

Coarse copper brush for cleaning the base prior to waxing and for brushing off hot wax.

For brushing off when preparing the base with glide wax and speed products.

Art.-Nr. 20523

Granular grinding rubber for refinishing ski and snowboard edges. Used to blunt the steel edge at the front and rear Optimally suitable for removing flash rust

Superior-quality aluminium edge angle for file guiding. Suitable for all ski files, grinding diamonds and oxide stones Delivery does not include File Guide Clamp (art. 24481

High quality base and training wax with a hydrocarbon basis. Handy set of one bar each of Betamix RED and Ultramix BLUE For all snow types For snow temperatures from -4 to - 20C Easy application no blending required

Holmenkol Oxyd Mini Oxide Stone is handy item to have around for removing those hardened ski or snowboard edge burrs that are too tough for a standard steel file to handle. It can be used on its own or in a file holding tool. Supplied with a plastic storage sleeve for protection, a must-have item fo...

Holmenkol 5mm Plexi Wax Scraper is a beefier version of the 3mm scraper and suitable for more robust workshop and race use. Its a simple and easy to use plastic scraper suitable for removing excessive wax when hot waxing skis or snowboards. It also has a notched corner for removing wax from the meta...

Holmenkol Betamix Red Ski Wax is a high quality; iron on base and training wax with a hydrocarbon base. Suitable for all snow types at temperatures from -4 to -14C; it is easy to apply and needs no blending. It has outstanding abrasion resistance and is suitable for ski racers for training or expert skiers &hellip

Alternative to Racing File L-MAXI (art. 24450) - for a somewhat finer finish Optionally suitable for Base Edge File Guide (art. 24450) 200 x 20 mm, 15 teeth/cm Professional file, for precise fine-filing ski and board edges.

Ultra Mix Blue by Holmenkol is a high quality coldest conditions ski and snowboard wax for when the temperature really drops on the mountain. When the snow temperature tumbles below -8C and towards -20C this wax will perform. Recommended iron temperature: 135-145C Snow temperature range: -8 to -20C ...

The Holmenkol Racing Mix Wet Wax is a highly fluorinated paraffin wax for racing and training missions of all disciplines (Alpine / Nordic). For fine to coarse and wet snow For snow temperatures from 0 to 4 C Top marks in acceleration; gliding and abrasion resistance Maximum water and dirt repellent Optimized &hellip

The Holmenkol Racing Mix Mid 2x35g wax is a highly fluorinated paraffin wax for racing and training missions of all disciplines (Alpine / Nordic). For fine to coarse and wet snow For snow temperatures from 0 to 4 C Top marks in acceleration; gliding and abrasion resistance Maximum water and dirt repellent &hellip

Gogue Nylon Ropes 8 mm nylon cord 5 adjustment rings Easy to adjust

Can be used with all membrane textiles (e.g. GORE-TEX) and synthetic fillings (e.g. Thinsulate; Thermolite; Primaloft) and elastic fabrics (e.g. softshell; fleece). Features of Holmenkol HighTec Proof universal impregnation Suitable for membrane fabrics (e.g. Gore-Tex) maintains breathability Strong water- and dirt-repellent lotus effect Easy application; spray on; let &hellip

Gogue Nylon Ropes 8 mm nylon cord 5 adjustment rings Easy to adjust

A pair of elastic nylon side reins which have a trigger hook fastening on one end. Available in black.

New Liquid Wax variant of the well-known skiwax bar Ultramix. For cold, old and aggressive snow. For snow temperatures from -8 to -20 C. Fast and easy application. Apply with the special fleece "CareFleece" 24492, allow to dry and then polish in with FinishCork 20645. Finished

Highly fluorinated additive; appropriate match for the race wax collection (Alpine/Nordic). For high air humidity and/or snow moisture To enhance gliding as well as water and dirt repellence GW 25 can be added to RaxingMix and SpeedBase Iron temperature 120C.

Features: Suitable for all membrane textiles (e.g. GORE-TEX) synthetic fillers (e.g. Thinsulate; Thermolite; Primaloft) and elastic fabrics (e.g. soft shell; fleece) Cleans breathable sportswear with care Effectively prevents the formation of unpleas

Boost your water workout with the Aquatic Resistance Belt The LAQRES is a comfortable, stationary swim training device that builds strength and endurance. With quick drying capabilities, it offers optimum comfort and convenience. The adjustable belt and clip system on this aquatic fitness equipment ...

Block of high quality wax in the 150g option, supplied in a storage case with lid to keep the wax clean when not in use. BETAMIX RED - smooth application and glide performance - works well in anything but Spring or extreme cold conditions - ideal as a base preparation layer for new skis or a complet...

Holmenkol Crossfile Maxi (also known affectionately as a "Bastard File" is a coarse body file which can used for removing excessive material rapidly when repairing or patching bases. The file incorporates to mounting holes, so the file can be mounted to a true bar for planing larger surfaces such as snowboards. If you have a lot of rust on your steel edges, this is also the veil that you can use.