Discover more like E3D Revo™ Nozzle Triple Sock Packs

Bits4bots is an authorised reseller of E3D products Swap your 3D printers nozzles in less than 60 seconds without tools or hot tightening just use your fingers If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and youre ready to 3D print. Exp...

Bits4bots is an authorised reseller of E3D products E3D colour-coded silicone socks for Revo Nozzles. Never run out of silicone socks for your Revo 3D printing setup This colour-coded sock kit includes ten silicone socks for all your 3D printing needs. The Revo Fully Loaded Sock Pack contains two so...

Bits4bots is an authorised reseller of E3D products Available with a short delay, expected to ship late Feb/Early March. These retention springs clip onto your Revo HeaterCore on one side, before connecting to any Revo-compatible cold side on the other including the Revo Micro, Revo Six, and Revo He...

Bits4bots is an authorised reseller of E3D products The Revo Hemera upgrade kit gives you all the parts you need to enhance your Hemera with the power of RapidChanging. No more tools or hot tightening This kit includes a Hemera heatsink with a revised design thats compatible with a Revo HeaterCore a...

Bits4bots is an authorised reseller of E3D products Revo Six is adrop-in replacement for yourE3DV6HotEnd, giving you all the benefits of E3Ds RapidChange Revo ecosystem in an easy-to-upgrade package. Compatible with Prusa MK2/3 (Check voltage before ordering) No machine redesign. Revo Six is a top c...

0.40mm nozzles is available in a 3 Pack here https:// bits4bots /products/e3d-revo-high-flow-nozzle-3-pack Frustration-free. Each Revo Nozzle is a preassembled nozzle and HeatBreak in one unit, so theres no hazardous hot tightening and no chance of incorrect assembly. Say goodbye to frustrating HotE...

Bits4bots is an authorised reseller of E3D products Swap your 3D printers nozzles in less than 60 seconds without tools or hot tightening, just use your fingers If you can unscrew a tube of toothpaste, you can use a Revo Nozzle. Just screw one in to any Revo cold side and youre ready to 3D print. Ex...

Revo Starter/Revo Creality Starter Packs Key features: - Best value entry-point for Revo - Tool-free nozzle changes in under 60 seconds - Brass nozzles for everyday 3D printing - 40W Heatercore enabling rapid heat-up/cool-down - Free Revo nozzle included If youre just getting started with 3D printin...

Bits4bots is an authorised reseller of E3D products The Revo HeaterCore is a heating and sensing architecture for E3Ds RapidChange Revo ecosystem. It combines a powerful heater and temperature probe into a convenient, compact package. - The HeaterCore secures onto a Revo-compatible cold side using a...

Bits4bots is an authorised reseller of E3D products Modify your Creality MK8 HotEnd with a genuine E3D Nozzle. E3D MK8 nozzles are designed for use with Creality MK8 Hotends. Check out the E3D Help Centre for a full list of compatibility. E3D's brass MK8 nozzles have optimal thermal properties for e...

Bits4bots is an authorised reseller of E3D products Smaller, lighter, and better than ever before, our Revo Micro HotEnd uses the smallest heatsink weve produced so far. Weighing in at only 30g, use Revo Micro to squeeze more speed performance from your motion system. Adaptable to Bowden or direct d...

High Temperature Abrasive Nozzles HT-Abrasive nozzles are high-temperature, abrasion-resistant nozzles. Much like ObXidian, HT-Abrasive nozzles have a hardened steel tip, copper carrier and copper spreader segment to optimise the transmission of heat to the heatsink. The nozzle is then coated with C...

Both kits come 60W 24V RC Core with Spring Single Nozzle Kit : 1 x 0.6mm Nozzle Fully Loaded Kit : 1 x 0.6mm, 1 x 0.8mm, 1 x 1.00mm, 1 x 1.20mm Nozzles Higher Flow. Revo High Flow increases your setup's volumetric flow rate, enabling you to print faster How does this work Unlike our previous High Fl...

Key features - Compatible with Voron 1, Voron Trident, Voron Switchwire, Voron 2.4, Voron Legacy, Voron 0.1 - Tool-free nozzle changes in under 60 seconds - Super lightweight construction for improved speed performance - Pairs perfectly with the Voron StealthBurner Upgrade your Voron 3D printer with...

Bits4bots is an authorised reseller of E3D products A replacement fan duct for your Revo Micro. A black injection moulded fan duct for your Revo Micro. This replacement fan duct clips snugly around the Revo Micro heatsink, and a Revo Micro fan clips into the other side. - Injection moulded polycarbo...

We offer exciting Revo upgrades for Prusa MK3 and Prusa Mini printers that enable users to change nozzles in under 60 seconds without the need for any tools. These Coldside kits include everything you need to securely mount the new setup to your Prusa printer. Pair with your perfect Hotside Pair you...

Bits4bots is an authorised reseller of E3D products Volcano nozzles are designed for the E3D Volcano heater block. From standard to super-fat layering, you'll be making stronger, faster and bigger prints in no time. 2.85mm Volcano nozzles are compatible with the Lulzbot Moarstruder. Brass Brass nozz...

Bits4bots is an authorised reseller of E3D products This tiny 5V fan with quiet performance is designed to keep your Revo Micro heatsink cool. A compact 5V regulator board is included to step down a maximum input of 24V. This tiny 5V fan is designed to fit a Revo Micro heatsink. A compact 5V regulat...

Bits4bots is an authorised reseller of E3D products Upgrade your Creality 3D printer to Revo so you can change nozzles cold without special tools and hot tightening hassles. No extra mounts or adapters needed: Pre-drilled M3 clearance holes match Crealitys X carriage mounting pattern for easy instal...

Bits4bots is an authorised reseller of E3D products V6 nozzles are designed for use with the E3D V6 heater block. Modify your HotEnd to be able to print with small nozzle orifices to achieve fine details or larger nozzle orifice sizes for more substantial, stronger prints. 1.75mm Brass V6 nozzles ar...

FAQs Do you need the new 60W Revo HeaterCore to use High Flow For the majority of uses cases the standard 40W HeaterCore will suffice, however, if you want to maximise your performance with high temperature materials we would recommend upgrading to the 60W core to reach the full potential of Revo Hi...

E3D Bambu Lab ObXidian High Flow HotEnds are an official collaboration between E3D and Bambu Lab, bringing you one of the most compact, lightweight and, more importantly, performant HotEnds to date. High Flow. There's no denying that the Bambu Lab X1 and P1 series printers are built for speed. Howev...

These high-quality 3D printing nozzles are designed specifically for use with Prusas latest extruder Nextruder. Compatible with Prusas MK4 and XL 3D printers, they feature an all-metal filament guide which means that Nextruders filament path is entirely metal. This helps improve overall printer reli...