Discover more like eSun ePA (Nylon) 1.75mm Filament 1kg

Build Plate Temp (OPTIONAL) 80 C : Carbon fiber reinforced nylon filament High Strength, High Rigidity, Good Toughness, Wear Resisting Good flame resistance, Flame-retardant Level: UL94-V2; Print temperature range: 260~300 Print Base temperature: 80 Print Speed30-60 mm/s; Move Speed90-150mm/s Carbon...

Recommended Build Surfaces Masking paper, PVP solid glue, PEI DISCLAIMER: BITS4BOTS LIMITED nor any of its Subsidiaries has any material liability (whether known or unknown, whether asserted or unasserted, whether absolute or contingent, whether accrued or unaccrued, whether liquidated or unliquidat...

ePA12 is a product developed based on PA12; low water absorption rate, the size of the printed parts is less affected by humidity and temperature. ePA12 has high toughness and high impact resistance, and can be used to print durable parts; Up to 165% elongation at break and excellent fatigue resista...

ePA12 is a product developed based on PA12; low water absorption rate, the size of the printed parts is less affected by humidity and temperature. ePA12 has high toughness and high impact resistance, and can be used to print durable parts; Up to 165% elongation at break and excellent fatigue resista...

Recommended Build Surfaces High temperature tape, PVP solid glue

Recommended Build Surfaces Masking paper, PVP solid glue, PEI

Build Plate Temp (OPTIONAL) 50C

Build Plate Temp (OPTIONAL) 100 ~ 110 C eSUN eABS MAX halogen-free flame retardant filament. The most flame retardant of all eSun filament About eABS Max 1. The appearance is black, nontransparent; 2. Non-toxic, tough, hard texture, with good temperature tolerance and creep resistant; 3. Good melt f...

eSun have made the move to Cardboard Spools. You can find out more about this here. You may receive a mix of different types of spools as we work through our stock. The latest batch of cardboard spools now has a waxed edge designed to be used with the Bambu Labs AMS unit. PLEASE NOTE for Bambu Labs ...

'White" is more like a milky white where "Cold White is more snow like. The PLA Bundle Pack are the same PLA Filament, but coming together in one box. B iomaterial extracted from corn grain, natural degradable and pollution-free for environment; high rigidity, good gloss and transparency; printing p...

eSun have made the shift to using cardboard spools. These cardboard spools will have the waxed edge designed to suit being used in the Bambu Labs AMS unit. Adding carbon fiber reinforced materials to PETG and modifying, it strengthens the rigidity and toughness of PETG. Features: - High Strength - Matte Texture - Chemical Resistance - Aging Resistance

Build Plate Temp (OPTIONAL) 60-80 C TPU (Thermoplastic Polyurethane) is a sturdy but flexible filament that is easy to use for printing and provides excellent bond between layers. This specially formulated plastic is resistant to oil, grease and scratches and is a great choice for products that need...

ePLA-Gloss has been discontinued by eSun. What ever stock remains is all that is left and available. ePLA-Gloss is a cost-effective PLA material that is environmentally friendly and easy to print. Compared with ABS, ePLA has higher rigidity and PC-like strength, and does not require a closed cavity,...

Note : PLA Refilament is compatible with eSun eSPOOL and Bambu Lab ReUsable spool. It is not compatible with older version of eSun eSPOOL. Please notice this Refill PETG comes without reel and needs to use with spool holder. It can be compatible with eSUN eSpool and Bambu Lab spool holder. It can me...

Build Plate Temp (OPTIONAL) 70-110 eASA is an impact modified resin composed of acrylonitrile, styrene and acrylic rubber. P roduct feature With a similarity in structure, eASA has excellent mechanical physical property as engineering plastics. Because the butadiene with double bond is replaced, eAS...

eSun have made the shift to using cardboard spools. These cardboard spools will have the waxed edge designed to suit being used in the Bambu Labs AMS unit. The ePLA-Chameleon prefers a special technique to give the filament a flowing and colorful effect, enhancing the vibrancy of solid-colored lines...

Note: This filament is wounded on a cardboard spool Looking to create visually striking 3D Prints, then give Bi-Colour Gradient filament a try It is like rainbow filament where the colour change is transitional with the colour changing over time. Bi-Colour Gradient however will only transition betwe...

Build Plate Temp (OPTIONAL) 110 Characteristics - High transparency - Nontoxic, environmental-friendly - High distortion temperature and high thermostability - Low flammability - Good malleability, easy to process DISCLAIMER: BITS4BOTS LIMITED nor any of its Subsidiaries has any material liability (...

Recommended Build Surfaces Masking paper, PVP solid glue, PEI DISCLAIMER: BITS4BOTS LIMITED nor any of its Subsidiaries has any material liability (whether known or unknown, whether asserted or unasserted, whether absolute or contingent, whether accrued or unaccrued, whether liquidated or unliquidat...

eSun have made the move to Cardboard Spools. You can find out more about this here. You may receive a mix of different types of spools as we work through our stock. The latest batch of cardboard spools now has a waxed edge designed to be used with the Bambu Labs AMS unit. PLEASE NOTE for Bambu Labs ...

Refilament PLA is essentially regular PLA but comes without the plastic spools. Help save the environment by re using your old spools. Use a 5mm allen(hex) key to unscrew an old eSun spool. Otherwise head to the link below for instructions and the STL file to print your own spool. esun3d.net/product...

Note : PLA Refilament is compatible with eSun eSPOOL and Bambu Lab ReUsable spool. It is not compatible with older version of eSun eSPOOL. Please notice this Refill PLA comes without reel and needs to use with spool holder. It can be compatible with eSUN eSpool and Bambu Lab spool holder. It can mee...