Discover more like Clamp Block Manitou Fork Single Crown (Shockcraft) Shockcraft

Fork and shock Shaft Clamp Block (Manitou)Etched part code: 172-31242Sizes 16.3, 14, 12.6, 12, 10 8mmFor Most Manitou forks and shocksManitou Part Code: 172-31464

Universal clamp block for almost every service job and every brand.

Permanent repair of creaking and ticking noises from fork crowns. Also improves fork stiffness. Shockcraft has the technology and understanding to dismantle and reassemble fork crowns for safe and permanent creak repair.Note that damaged crowns will be rejected. This is not a repair for parts stretc...

See relevant Related Products for photos and further information on the items in this fork service kit.Manitou wiper seals can be installed at half height to fit the original mini-boot wipers.Bath Oil Type VolumeBath Oil - Manitou Semi-Bath (Motorex

Kit includes 2 low friction SKF seals and 2 foam ringsFits 37 mm stanchioned Manitou Mezzer or Dorado forks from 2020 to presentFlangeless type for 47 mm pocketManitou Part Code: 141-36713-K025

Application: Manitou DORADO forks 2008-2020Kit includes o-rings quad rings for TPC damper, Dorado Air Spring, IRT Air Spring O-rings and a travel check o-ringDoes not include wiper seals, fluids, valve core seal etc. These are all available in our Dorado Fork Service KitPDF showing contents of kit is available here

Clamps fit all Fox FLOAT shocks and many more. Required for full damper service. Handy for air-can service to remove overtightened air-cans and stuck hardware.2000-2004 FLOAT, FLOAT R, FLOAT RL, AVA2005-2013 FLOAT RP2, FLOAT RP3, Specalized Tr

Ready Mix Tune for the Manitou Mara Inline is Shockcraft's unique Pick Mix Self Tune system but the Picking, Mixing and Installation has been done by Shockcraft for you.This tuning system gives you compression and rebound damping matched to your wei

Installation InstructionsStrip fork lower legs and spring side. Leave damper cap, shaft and oil in place.Damper shaft removes with an 8mm hex key turned clockwise into the lower legs.Lay out coil spring cap, spacer, spring, compression rod and bumpe

Kit fits all the below shocks but will have leftover seals.Identification2008-2015 Manitou Swinger 4Way Second Generation. 40 mm or 43 mm ID black air can with foam negative spring2008-2015 Manitou Swinger 6Way Second Generation. 40 mm or 43 m

Kit fits all the below shocks but will have leftover seals.Identification2008-2015 Manitou Radium R with Rebound adjust.2008-2015 Manitou Radium RL with Rebound adjust and lockout lever.2008 Manitou Radium LRS for Merida with seatstay mounted shock. 

Benefits: Suspension that is stable and supportive while being planted, yet playful. Suspension that is smooth, controlled and always predictable with no bad habits. Eliminates s

Replacement of individual Stanchion or Steerer Tubes in fork crowns. Shockcraft has the technology and understanding to dismantle and reassemble fork crowns for repair.Note that damaged crowns and tubes will be rejected. This is not a repair f

Kit fits all the below shocks but will have leftover seals.Identification2004-2005 Manitou Swinger 3Way First Generation. 40 mm ID gold air can and sealed negative air2005-2007 Manitou Swinger 3Way Second Generation. 43 mm ID black air can wit

Kit fits all the below shocks but will have leftover seals.Identification2004-2007 Manitou Swinger 4Way First Generation. 40 mm gold anodised air can with trapped air negative spring2004-2007 Manitou Swinger 6Way First Generation. 40 mm gold a

Complete rebuild seal kit for Manitou McLeod rear shocks Fits single-can and king-can (dual can) Manitou Part Code: 142-31535-K001

Kit fits all the below shocks but will have leftover seals.Revox shocks have 14mm shafts.Will not fit earlier year shocks with 1/2" (12.7 mm) damper shaft, individual damper dials and the 16 mm hex SPV volume adjuster.Identification2010-2015 Manitou Revox

Kit containing everything to service your 2009-2020 Manitou Dorado 36 mm forks.

Ready Mix Tune for the Manitou Mezzer Pro MC2 damper is Shockcraft's unique Pick Mix Self Tune system but the Picking, Mixing and Installation has been done by Shockcraft for you.This tuning system gives you compression and rebound damping matched t

Ready Mix Tune for the Manitou Mezzer Pro MC2 damper is Shockcraft's unique Pick Mix Self Tune system but the Picking, Mixing and Installation has been done by Shockcraft for you.This tuning system gives you compression and rebound damping matched t

Air can seals for Manitou McLeod rear shocks Fit single and dual (king) can Kit includes quad ring, wiper seal, top-out bumper, glide rings and backup ring Manitou Part Code: 142-31535-K002

Benefits: Suspension that is stable and supportive while being planted, yet playful. Suspension that is smooth, controlled and always predictable with no bad habits. Eliminates s

Dorado IRT (Infinite Rate Tune) upgrade assembly Fits all Manitou Dorado forks 2009 onwards Easy installation in place of lower leg air cap Includes instructions pressure guide Manitou Part Code: 141-32668-K005