Discover more like Rocky Creek PA006 SAE Battery Lead

These heavy-duty SAE battery leads (18 gauge wire) can handle 15 amps of current. Use this cable to bypass your motorcycle Canbus and connect directly to your battery. Includes 15 amp fuse and tethered dust cap. The cable is 45cm in length.

Hook the charger up to your battery and you have two USB charging ports AND a voltmeter. Most importantly this unit has an ON/OFF switch so when youre not riding, turn the unit OFF and you wont drain your battery. Comes with a 1m long SAE to SAE lead and a mirror mount. The charger outputs a total o...

Hook the charger up to your battery and you have two USB charging ports AND a voltmeter. Most importantly this unit has an ON/OFF switch so when youre not riding, turn the unit OFF and you wont drain your battery. Comes with a 1m long SAE to SAE lead and a mirror mount. The charger outputs a total o...

Got an electronic device like a spot light with a male lighter attachment Want to run it off your bike but dont have a female lighter fitting Not any more, just connect this fitting to any SAE battery lead lead and you're right to go No soldering or splicing your wiring harness, simply plug it strai...

Got an electronic device like a spot light with a male lighter attachment Want to run it off your bike but dont have a female lighter fitting Not any more, just connect this fitting to any SAE battery lead lead and you're right to go No soldering or splicing your wiring harness, simply plug it strai...

Got an accessory socket on your bike and want to connect a device with an SAE fitting like a MotoPressor Pocket Pump This adaptor comes with a male lighter fitting that will fit BOTH car and motorcycle lighter sockets. To plug into a motorcycle-style (Hella) socket, simply remove the RED adaptor at ...

Got an accessory socket on your bike and want to connect a device with an SAE fitting like a MotoPressor Pocket Pump This adaptor comes with a male lighter fitting that will fit BOTH car and motorcycle lighter sockets. To plug into a motorcycle-style (Hella) socket, simply remove the RED adaptor at ...

Comes with a 1.5m long power lead with Battery Circles and Blade Connectors. Attach the power lead to your battery, Red to ( ) and Black to (-). Next attach the corresponding wires to the back of the socket as marked on the back of the socket. The socket will handle 12V/120W. BEFORE DRILLING ANY HOLES ensure there is enough space behind the installation point to accommodate the body of the socket.

Comes with a 1.5m long power lead with Battery Circles and Blade Connectors. Attach the power lead to your battery, Red to ( ) and Black to (-). Next attach the corresponding wires to the back of the socket as marked on the back of the socket. The socket will handle 12V/120W. BEFORE DRILLING ANY HOLES ensure there is enough space behind the installation point to accommodate the body of the socket.

Batteries on some bikes like the 2015 BMW R1200GS LC are not easily accessible. In the case of the R1200GS, the battery is located behind the left-hand side panel. On other bikes, it's behind fuel tank covers and they have to be removed before you can get to the battery. Not much use if you want to ...

Batteries on some bikes like the 2015 BMW R1200GS LC are not easily accessible. In the case of the R1200GS, the battery is located behind the left-hand side panel. On other bikes, it's behind fuel tank covers and they have to be removed before you can get to the battery. Not much use if you want to ...

This connector will enable you to run accessories like the MotoPressor Pocket Pump, off a Mini Jump Starter. Plug the Blue plug (EC5) into your Mini Jump Starter and the other end into any accessory running an SAE connector like our MotoPressor Pocket Pump. You now have a means to connect and power ...

This connector will enable you to run accessories like the MotoPressor Pocket Pump, off a Mini Jump Starter. Plug the Blue plug (EC5) into your Mini Jump Starter and the other end into any accessory running an SAE connector like our MotoPressor Pocket Pump. You now have a means to connect and power ...

Comes with a 1.5m long power lead with Battery Circles and Blade Connectors. To install, attach the power lead to your battery, Red to ( ) and Black to (-). Next attach the Red wire ( ) to the pin closest to the centre of the socket and the Black wire (-) to the pin closest to the edge of the socket...

Comes with a 1.5m long power lead with Battery Circles and Blade Connectors. To install, attach the power lead to your battery, Red to ( ) and Black to (-). Next attach the Red wire ( ) to the pin closest to the centre of the socket and the Black wire (-) to the pin closest to the edge of the socket...

The MotoPressor Pocket Pump V2 is the perfect lightweight companion for riders who need a reliable tyre inflator. Its ultra-compact design makes it easy to carry, and it'll inflate a 150/70/ R18 tyre in under 4 minutes The entire kit weighs just 545g and includes an EVA zippered bag, inflation hose, alligator clips, and an SAE battery cable, so you'll always be prepared.

The MotoPressor Pocket Pump V2 is the perfect lightweight companion for riders who need a reliable tyre inflator. Its ultra-compact design makes it easy to carry, and it'll inflate a 150/70/ R18 tyre in under 4 minutes The entire kit weighs just 545g and includes an EVA zippered bag, inflation hose, alligator clips, and an SAE battery cable, so you'll always be prepared.

Hard wire your charging solution to your bike battery. The two USB power ports offer 5V/2.1A per socket and when powered on will display you battery voltage. The USB charging ports supply enough power to charge devices like phones, tablets, trackers, GPS. NOTE - WIRE TO COME ON WHEN THE IGNITION IS TURNED ON. WE RECOMMEND INSTALLATION BY AN AUTO ELECTRICIAN.

If you have a 12V accessory with a standard cigarette lighter plug and you want to power it off a jump starter battery this is the lead. Plug the EC5 plug into the corresponding EC5 port on your Jump Starter and plug your accessory plug into the lighter socket..you now have power. NOTE COMPATIBLE WITH JUMP STARTER BATTERIES USING EC5 SOCKET ONLY.

Hard wire your charging solution to your bike battery. The two USB power ports offer 5V/2.1A per socket and when powered on will display you battery voltage. The USB charging ports supply enough power to charge devices like phones, tablets, trackers, GPS. NOTE - WIRE TO COME ON WHEN THE IGNITION IS TURNED ON. WE RECOMMEND INSTALLATION BY AN AUTO ELECTRICIAN.

If you have a 12V accessory with a standard cigarette lighter plug and you want to power it off a jump starter battery this is the lead. Plug the EC5 plug into the corresponding EC5 port on your Jump Starter and plug your accessory plug into the lighter socket..you now have power. NOTE COMPATIBLE WITH JUMP STARTER BATTERIES USING EC5 SOCKET ONLY.

The MotoPressor Pocket Pump V2 is the perfect lightweight companion for riders who need a reliable tyre inflator. Its ultra-compact design makes it easy to carry, and it'll inflate a 150/70/ R18 tyre in under 4 minutes The entire kit weighs just 545g and includes an EVA zippered bag, inflation hose, alligator clips, and an SAE battery cable, so you'll always be prepared.

5 Amp charger lead extender with weather/dirt protected SAE connection system. Features: - LENGTH: 15ft/460cm - CONNECTORS: SAE to SAE - CABLE RATING: 18AWG (0.82mm2) SPT-2 - USE: -20C/-4F low temperature use - STYLE: Includes in-line rubber seal for OptiMATE heavy duty SAE connector.