Discover more like Bernette Blindstitch Foot 1.00mm - Bernina Sewing Centre Tauranga

For especially elegant garments For sewing invisible hems Barely visible stitching on the front For 5.5 mm and 9 mm machines Blindstitch Foot #5 is the invisible-hemming expert. When you sew a blind-hem with this foot, the stitching can scarcely be seen from the front. With Blindstitch Foot #5 the stitch is formed over a special &hellip

For especially elegant garments For sewing invisible hems Barely visible stitching on the front For 5.5 mm and 9 mm machines Blindstitch Foot #5 is the invisible-hemming expert. When you sew a blind-hem with this foot, the stitching can scarcely be seen from the front. With Blindstitch Foot #5 the stitch is formed over a special &hellip

This foot is a specialist for working with blindhems. In one step the seam is sewn and the edge is finished. Therefore the blindstitch foot allows quick and proper working and is ideal for the creation of attractive blindhems on home furnishing and garments.

This foot is most suitable to sew blindhems or to topstitch edges. The stitches only pierce the hem so that the stitch holes are hardly visible on the right side of the fabric. The blindstitch foot for Dual Feed is provided with a recess on the back side of the presser foot to activate the &hellip

This foot is most suitable to sew blindhems or to topstitch edges. The stitches only pierce the hem so that the stitch holes are hardly visible on the right side of the fabric. Suitable for: Category F 1 b33, b35 Please include the model of your machine in the comments section when placing an order &hellip

For creative work with beaded or sequined ribbons. The groove in the middle of the foot serves as a guide for sewing on cords, bead and sequin ribbons.

Difficult-to-work-with fabrics are best sewn using the Walking Foot. It supports the fabric feed by a second feed dog on the upper side of the foot. The sewing project is moved simultaneously by the two feed dogs which allow a smooth sewing process.

Pintuck foot with grooves is used when sewing pintucks with a double needle. The grooves enable you to sew parallel tucks.

Pintuck foot with grooves is used when sewing pintucks with a double needle. The grooves enable you to sew parallel tucks.

For especially elegant hems - For an invisible edge finish - Also suitable for flatlock and heirloom sewing - Infinitely adjustable - Folded edges can be guided easily for sewing without cutting The adjustable guide plate on the side makes it easier to stitch blind hems. The Blindstitch Foot can als...

Presser foot set for the Bernette Overlocker (serger) and the Bernette Overlocker/Coverstitch Combi machines. Binder Attachment for unfolded bias tape Hemmer and Lace Foot Hemmer Foot a) Cording Foot and b) Cording guide Standard Presser Foot with Clear Sole Lace Foot Belt-Loop Foot Booklet

The Overlock Foot facilitates finishing edges professionally and sewing seams similar to overlocking. It is also particularly suitable to create decorative cuffs and seams in the most common knitware fabrics.

The Piping foot with 2 grooves is suited ideally to create and sew in braids. That gives main points to home furnishing or garments. It is also possible to sew on two cords simultaneously.

This foot is ideal to sew along a plexiglass ruler. Note: When using this presser foot make sure the 2mm reduction is active in the sewing settings hovering height. You can also adjust the presser foot height by reducing the presser foot pressure below 0. Lower the feed dog and use without dual feed. &hellip

The sewing machine bag by bernette is suited for transporting your sewing machine. Inside pads support the secure transport and take care of the perfect condition of your sewing machine even when going on long journeys. The sturdy construction protects your machine against external impacts and is easy to clean after the use. Apart from &hellip

This foot is simply perfect to sew in zippers. As the zipper is invisible afterwards, an especially elegant look is achieved.

This foot is most suitable to sew blind hems or to topstitch edges. The stitches only pierce the hem so that the stitch holes are hardly visible on the right side of the fabric.

The hopper embroidery foot is the perfect choice when it comes to embroidering on pile and bulky fabrics, such as terrycloth. Thanks to the spring mechanism, the optimum pressure is applied to the embroidered material, while at the same time, the movement of the foot compensates for any uneven areas, such as puffy lettering or &hellip

Blindstitch foot for the Bernette 37 38

The buttonholes can be sewn easily in different versions and either with or without using cord. Any number of buttonholes can be sewn at exactly the same length.

For everyday sewing projects Makes precise sewing easier Markings as a practical guide Tape guide for tapes up to 8 mm wide The transparent overlock foot eases precise guiding of fabric, for example for sewing corners or circles. Successful to perfect seams and edge finishes in due course.

Sturdy sew table to fit a Bernette b37 or a Bernette b38 sewing machine

The belt-loop foot is used to fold bias or straight binding, which it then quickly and easily turns into straps or belt loops with the cover- or chainstitch.