Philips UV Purification| Big UVCA210 Air Disinfection Unit| Kills 99% Germicides Including Delta and Omicron Variants of Covid-19 Virus

Suitable for random switching Not applicable

Warnings and Safety

• Our UV-C Products are not meant to be used in applications or activities which may cause and/or lead to death, personal injury
and/or damage to the environment.
• This UV-C product is intended to be used for the disinfection of indoor air.
• This UV-C product is not approved and/or certified as a medical device.
• The back cover must be closed properly before disinfection, otherwise the UVC lamp won’t work.
• Product is designed to avoid any kind of UV-C leakage, in case there is a leakage due to product damage or similar incident,
please stop using and report back to Signify sales representatives. Signify will not be responsible for any accidents/injuries
caused by exposure to UV C light.
• Please contact manufacture or its maintenance department and other similar professionals for repair. When the product is
working normally, the UV C radiation at 200mm from the product is less than 1mW/m. If the power cord is damaged, it must be
replaced with a dedicated cord or with a dedicated component purchased from its manufacturer or maintenance department.
• UV-C exposed luminaire parts (other than metal parts), like Lamp holder, end cap. might change colour after a certain period
of usage due to the UV C light property.
• UV-C light emitted from UVC lamp is much 'stronger' than normal sunlight and can cause a severe sunburn like reaction to your
skin, and similarly, could damage the retina of your eye, if exposed.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• In case of accidental breakage of the lamp tube, it should be ventilated for 30 minutes first.
• Please remove the debris with gloves, put it in a sealed plastic bag and take it to a local waste disposal site for safe disposal