Takapuna Art Supplies (World HQ) 10k9,287 views  2,194 clicks ♡

"Cold-Casting" is a term used to describe the process of mixing metal powder with a resin and applying the mixture into a mold. The finished casting gives the appearance and weight of solid metal. The metal cold-cast process is faster and much less expensive when compared with foundry casting of mol...

When melted this molding material is 100% reusable. Many casts can be made using the same mold. It is a great material for artists who want to learn and become more involved in sculpting, modeling and mold making without the worry of mistakes or wasting material. This flexible, rubbery thermoplastic...

Use this liquid latex rubber for making three-dimensional molds. Simply brush several thin coats on an object you wish to duplicate and peel off a ready-to-use mold. It cleans up quickly with water. Mold Builder can be used for casting candle wax, plaster and resin.

Make perfect reproductions of 3-dimensional shapes in minutes with this ingenious water-activated, non-toxic, mold-making compound. The finished mold can be used with resin, wax, Permastone or casting plaster to make numerous copies. In a 12 oz. canister that makes up to a gallon of working mixture.

Pinkysil is a two-component, addition curing, low viscosity silicone designed for taking very fast impressions. It is ideally suited to and is the product of choice for fast set moulds where a free flowing product is required and when time factors are an issue. Skin safe.

Harder Than Plaster...Smoother Than Cement. This system uses a dry mix and water at a ratio of 2.5 parts powder to 1 part water; and not less than 2 parts powder to 1 part water by weight or volume. It solidifies to a beautiful light Gray color. The texture is similar to a cement feel, but much smoo...

No more mixing paste and cutting strips of paper– simply add water for a great sculpting medium that is completely non-toxic and safe. Celluclay will adhere to almost any surface and can be sawed, sanded or nailed when dry. Dries to a gray color 1lb.

This plaster-like casting compound dries to be super-hard. Ideal for projects that require break-resistant casting. It can be finished with oils, acrylics, watercolors, poster colors, etc. In a 28oz. can.

Gypsona is a premium quality plaster bandage and is the preferred brand by most experienced lifecasters for its creaminess and smoothness.

This white, non-toxic, cellulose-based compound combines the best features of clay, plaster, and papier maché. Sculptamold is lightweight like papier maché, but it does not shrink. It models and casts like clay, and sets up hard like plaster in about 30 minutes. Cast it in molds made of rubber,...

Clear coat high-glass epoxy resin brings artwork to life while protecting it.

Use the Scratch Knife for thin or wide precise parallel lines. The knife comes with two different nibs.

The Fiber Brush is used to soften crisp edges and create gradual tonal values on claybord.

Use the Line Tool for parallel lines and cross-hatching. The tool has four needles tightly pressed together for fine detail.

Easy-to-use clay extruder for all unhardened modeling clays. The crank ensures ergonomic comfortable and effortless rotation. High-quality design and easy to clean.

The drill on this tool is 2.5mm and 40mm in length. It is made of stainless steel and is rustproof. The drill is ideal for making holes in hardened clay e.g. beads. The smoothing tool is especially suitable to smooth raw materials, to cut off modeling clay and to accentuate raised designs. Easy to clean.

This tool has a rustproof needle tip made of stainless steel. Ideal for making holes in beads, to smooth and model fine details and patterns, as well as to pick up and attach small clay parts. V-tool has a 60 degree angle and is 40mm in length. Ideal for carving to define areas and to cut regular grooves. Easy to clean.

This tool has 2 different balls made of chrome-plated carbon steel, 1.5mm & 8mm. Ideal for shaping soft modeling clay e.g. shaping hollows, arches or eye sockets. Suitable for various applications and modeling fine details. Easy to clean.

This Clay Shaper has an extra firm silicon, taper point and flat chisel for precise sculpting and shaping of modeling clay. Easy to clean.

Coil, bend, wrap and manipulate this light-weight and fully pliable aluminum alloy wire into any shape. Perfect for creating an internal support structure for clay or wax sculpture or to be used alone as wire sculpture. The wire will not corrode or stain, and has a melting point of 1220 degrees F/660 degrees C.

These long, thin blades cut smoothly through clay while the interchangeable comfort handles protect hands and fingers. Includes four different blades (rigid, flexible, wavy and rick-rack) and one set of snap-on handles.

Designed to roll even sheets of clay, the non-stick surface also eliminates the need for a release agent. Smooths clay surface. Cleans up with soap and water.