Zeiss DTC-R M52 Digital Thermal Imaging Clip-on Adapter Ring

The one part of a specially designed adapter duo that is required to attach a Zeiss DTC 3 Digital Thermal Imaging Clip-on optic to your riflescope. You will also require the DTC-A adapter itself which can be purchased separately here.

This adapter ring is the link between the Zeiss DTC-A adapter and the Zeiss DTC 3 thermal imaging clip on that are required to use the set up with your riflescope. Your DTC ring is equipped with an M52 screw thread on the attachment side that connects to your Zeiss DTC 3/38 Digital Thermal Imaging Clip-on. On the opposite site, there is a bayonet attachment that securely connects the DTC ring to the adapter.

When the combination of the DTC 3 Thermal Imaging Clip-on, DTC-R M52 adapter ring, DTC-A Adapter and have all been attached and zeroed in, the adapters and DTC 3 Thermal Imaging Clip-on can be removed easily from your riflescope for transport. Thanks to the bayonet attachment, the position of the point of impact is not changed, as long as the position of the DTC adapter on the riflescope side is not changed.

This awesome adapter offers you the newest technology and allows an easy and fast mount and dismount of your Zeiss thermal clip-on device. In combination with the zeroing profiles of the DTC 3 the ZEISS adapter can be used on up to 4 different riflescopes.

Features:

- Part one of the two part adapter required to connect a Zeiss DTC 3 Digital Thermal Imaging Clip-on to a riflescope
- Also need to purchase the second part of the adapter - Zeiss DTC-A adapter
- Bayonet attachment makes it easy to remove from riflescope