22 5.0 DC Race Roller: 1/10 2wd Buggy

Assembled to our TLR Race Team’s Factory Specifications, the Team Losi Racing® will get any racer off on the right foot and competing for podiums quickly! Key Features

- Low Maintenance Gear Differential
- Adjustable Rear Hubs and Inner Rear Pivots
- Revamped Steering Geometry
- 2.0 Milled Aluminum Chassis
- 22 5.0 Body In The Box

- 1/10 22 5.0 DC Race Roller
- Product Manual Needed to Complete

- Radio System
- Motor
- Electronic Speed Control
- Servos
- LiPo Battery
- Charger Overview

Assembled to our TLR Race Team's Factory Specifications, the Team Losi Racing® will get any racer off on the right foot and competing for podiums quickly! Factory built and pre-assembled as a Race Roller chassis, new drivers can start racing in less time. Just add your preferred electronics, tires, and paint to make this Race Roller as unique as you. The 22 5.0 DC Race Roller has a combination of features second-to-none including low maintenance gear differential, G3 12mm big bore shocks, revamped steering geometry, and so much more. No matter if the terrain is dirt or clay, the 22 5.0 DC Race Roller is at home on the racetrack and poised for the podium. Features

- Pre-Assembled Race Roller
- Low Maintenance Gear Differential
- Adjustable Rear Hubs and Inner Rear Pivots
- G3 12mm Big Bore Shocks
- Revamped Steering Geometry
- Super Heavy Duty Slipper (SHDS)
- 2.0 Milled Aluminum Chassis
- 22 5.0 Body
- TLR Front Wing Included

- Diff Height Adjustment
- Front Roll Center Adjustment
- 3-position Front Camber Block
- New Battery Hold Down
- Optimized Composites
- TLR 6.5" Rear Wing
- Built-In Motor Fan Mount
- Laydown Configuration
- All Metric Hardware Race Roller

Factory Built as a Race Roller Chassis, just install the electronics, mount the preferred tires, paint the body and the 22 5.0 DC Race Roller will be ready to hit the track and collect podiums!

Low Maintenance Gear Differential

Optimized for reduced maintenance, the 22 5.0 DC Race Roller includes TLR's metal version gear differential which is ultimately reliable and uses silicone fluid to adjust performance.

VHA Rear Hubs and Adjustable Inner Rear Pivots

The 22 5.0 DC Race Roller includes Inner Rear Pivots with roll center, track width, anti-squat and toe adjustment paired with the Variable Height Axle (VHA) rear hubs which also give more roll center and axle height adjustment. This is the most adjustable rear suspension TLR has ever produced.

Revamped Steering Geometry

The 22 5.0 is the best driving 2wd Team Losi Racing has ever created, and the biggest improvement comes from the steering geometry. Increasing the length of the steering bell cranks and spindle arms, along with changes to the Ackermann angle give the 22 5.0 DC Race Roller a significantly smoother steering feel, especially off-center and high speed, while increasing low-speed steering for tighter tracks and 180's.

Super Heavy Duty Slipper (SHDS)

The slipper is optimized with all new slipper plates, slipper pads, spring, spur gears, and an all new top shaft. The new top shaft uses a sturdy M4 lock nut, the new slipper pads allow for spur gears sized 69T to 81T, reduced slipper pad area provides a more linear slip through the throttle application, and thicker slipper plate keep consistent pressure across the surface of the slipper pads.

G3 12mm Big Bore Shocks

The G3 shocks give the 22 5.0 the plush handling and consistent, leak-free bleed as the Gen II shocks, but with some long-anticipated ease of use improvements. No more e-clips as the pistons are now secured by screws, new shock caps and shock bodies increase the spring collar height by 3mm to accommodate lower ride heights, new eyelets and spring cups provide -3mm, 0mm and 4mm spring cup off-sets and paired with all new eyelets will never pop off with the screw in feature. The new eyelets are also made in two lengths that allow racers to switch between different heights, and work with revised shock balls that finally slide into the front arms smoothly and easily.

Milled 2.0mm Aluminum Chassis

Maximizing the flex characteristics for all surfaces, the 2.0mm thick chassis give the right about of flex and rigidity for smooth corning, optimized balance, and bounce-free landings.

22 5.0 Body

Maintaining the excellent balance, grip, and stability of the 22 4.0 body, with a similar styling, the 22 5.0 body is pulled from 0.8mm PC plate for a lightweight body that still has fantastic durability. As with all TLR bodies, the 5.0 body is clear a