EcoSoft RO Tankless System - 75 LPH - NSF58 Certified
RObust PRO is specifically designed to reveal the taste and odor of coffee. The water meets the stringent standards set by the Specialty Coffee Association (SCA).
Also suited for drinking water with the addition of a remineralising filter (not included) Description
Code ROBUSTPROB
RObust PRO specifically designed to reveal the taste and odor of coffee. Trusted by professional baristas, it complies with SCA 1 standards, providing the best quality water for making coffee. Provides perfect water for coffee (in accordance with the SCA standards)
This water treatment system is made by Ecosoft, a well-established manufacturer with factories in Germany and Belgium & Ukraine
The ROBUST PRO system is a four state reverse osmosis system with pressure pump, capable to produce up to 1,890 liters of clean drinking water per day
• Direct flow RO system
• Designed for tankless operation
• Built-in pressure gauges indicating pre-filters and membrane conditions
• CE marked and confirmed to be safe in accordance with EC New Approach Directives. Specifications
- Brand Ecosoft
- Inlet/Outlet 1/2"
- Max Pressure (bar) 5
- Min Temp (degrees c 4
- Max Temp (degrees c) 30
- Application Commercial
- Dimensions 420 × 410 × 305 (H x W X D)
- Flow Capacity 70 - 75lph
- Water Consumption 140-150 lph
- Power 230volt
- Purified water flow rate 70-75, L/h
- Feed water flow rate, 140-150 L/h
- Concentrate (brine) flow rate, 70-75 L/h
- Recovery rate 50%
- Nominal micron rating 0.001 - 0.0001
- Inlet water pressure, 4 bar
- Operating pressure, 5-7 bar
- Feed water temperature, 4-30 °С
- Ambient air temperature, 5-40°С
- Connection to water mains 1/2"
- Power consumption, 80watts
- Power 230volt
- Power consumption 0.08kw
Requirements
Feed water requirements
- pH 6.5
- TDS, ppm 250-500
- Total hardness 100–400 ppm CaCO3
- Alkalinity 100–200 ppm CaCO3
- Active chlorine, ppm< 0,5
- Total iron, ppm< 0,3
- Total manganese, ppm< 0,05
- Chemical oxygen demand, ppm O2
- Total microbial count (TMC), (CFU per 1 mL