MyTools 46 views 45 clicks Claim this Business♡
×-
$52.92C&D CD9603 1/4 SAE Brass Access TeeUseful in attaching Hi-Lo side switch and other connecting needs valve has brass valve depressor with 1/4" flare nut, 1/4" male flare with internal thread for valve core (not included) and 1/4" male flare with valve core.FEATURES:1/4" M. flare access x 1/4" M. flare access x 1/4" x 1/4" F. flare wit...Buy from Store ⊕ More like this 0 0 -
$52.92C&D CD9611 1/4 Inch Flared Forged Brass TeeForged brass tee, 1/4" female flare nut with depressor tip x 1/4" male flare access x 1/4" male flare access x 1/4" male flare access on branch with one valve core.FEATURES:1/4" female flare nut with depressor tip1/4" male flare access on the branch with one valveForged brass tee.INCLUDES:1 x Valve ...Buy from Store ⊕ More like this 0 0 -
$47.17C&D CD9616 1/4 Inch SAE Access Tee1/4" m. flare access x 1/8" MPT (on run) x 1/4" m. flare access on the branch, CD2245 brass cap and valve core, MPT end has 1/4" ID for tube, forged brass.FEATURES:1/4" m. flare access x 1/8" MPT (on run) x 1/4" m. flare access on branchCD2245 brass cap and valve core, MPT end has 1/4" ID for tube, ...Buy from Store ⊕ More like this 0 0 -
$107.71C&D CD2037 1/4F x 3/8M Flare Sure Seal CouplerSure Seal - Retaining CouplersWhen attached to an access fitting, the "Sure-Seal" retaining coupler automatically open and depresses the valve core all in one action. When disconnected, it traps refrigerant in the charging hose. Leave it permanently installed on the end of the hose. The seals are co...Buy from Store ⊕ More like this 0 0 -
$54.76C&D CD2005BT 1/4?FSAE x 1/4?FSAE Swivel AdaptorFEATURES:Buy from Store ⊕ More like this 0 0
1/4? f. flare swivel x 1/4? f. flare swivel
Seals & No Depressor Tips
Made in the USA.
INCLUDES:
1 x CD2005BT & 12-Month Warranty.
SPECIFICATIONS:
Country of origin: USA -
$27.13C&D CD5555 Replacement O Rings For Core Removal ToolsReplacement o-rings for Core Removal Tools. All the O-rings are necessary to repair any CRT, except the ones in the chuck that grab the core stem.FEATURES:Rings for Core Removal Tools.INCLUDES:1 set of O-rings & 12-Month Warranty.SPECIFICATIONS:Unit of Measure: EAWeight: 0.05 kgLength: 5.0 Inches (I...Buy from Store ⊕ More like this 0 0 -
$69.73C&D CD3815 Valve Core Torque DriverTorque release valve core tool. Take the guesswork out of tightening a valve core. Precision torque release ensures the valve core is tightened correctly every time. Prevents leaks due to under-tightening & prevents damage to valve cores due to over-tightening. Steel jaws ensure a long life. The Ste...Buy from Store ⊕ More like this 0 0 -
$40.95C&D CD5050 Mini Core Depressor 1/4 Inch SAEUltra-miniature 1/4 SAE Male/Female core depressor for use in tight situations. Reduced size thumbscrew flows control valve & core depressor ¼ SAE.FEATURES:Flow Control ValveReduced size thumb screw core depressor, coupler attaches to 1/4" Male Flare1/4" Male flare side portMade in the USA.INCLUDES...Buy from Store ⊕ More like this 0 0 -
$80.09C&D CD2070 1/4 SAE Core DepressorMaintains refrigerant in gauge lines, enables secure & safe connection to 1/4 SAE fitting. Prevents refrigerant burns. CD2070 ¼ SAE valve core depressor safely depresses valve core eliminating refrigerant burns. The back sealing valve ensures minimum refrigerant loss from the hose so ensuring compl...Buy from Store ⊕ More like this 0 0 -
$108.87C&D CD2085 R410A Core Depressor5/16 SAE valve core depressor safely depresses valve core eliminating refrigerant burns. The back sealing valve ensures minimum refrigerant loss from the hose so ensuring compliance with A.R.C guidelines for h&ling of refrigerants.FEATURES:5/16" SAE fittingMaintains refrigerant in gauge lines.Enable...Buy from Store ⊕ More like this 0 0 -
$62.82C&D CD2038 Valve Fitting - Adaptor 3/8" SAE Male To 1/4" Female SAE SwivelCD2038 Valve Fitting – Adaptor 3/8? SAE Male to 1/4? Female SAE Swivel. Allows for faster vacuum times by working with core removal tools & allowing direct access from the vacuum pump directly to the system. Speed-up vacuum times & reduce leak possibility. Commonly used to attach 3/8 vacuum hoses ...Buy from Store ⊕ More like this 0 0 -
$84.69C&D CD5060 R410A Mini Core Depressor 1/4 Inch SAE Male, 5/16 Inch SAE FemaleUltra-miniature 1/4 SAE Male/Female Core depressor for use in tight situations. CD5060 is 5/16 SAE Female & 1/4 SAE male (use with R410A) Can be used with CD9601 & CD9602 Access tees with male or female side fittings (Use to Convert a Single Port to Dual or Test Port).FEATURES:Flow control valve.Red...Buy from Store ⊕ More like this 0 0 -
$40.95C&D CD2058 1/4 Female To 5/16 Male AdaptorCD2058 1/4 Female to 5/16 Male Adaptor: Used to connect vacuum pump & recovery machines to R410A manifolds or any other 1/4 fitting that needs to connect a 5/16th connector.FEATURES:Twin Pack (of two)Quality 1/4 Female to 5/16 Male AdaptorUsed to attach R410A hoses to vacuum pumps & recovery unitsMa...Buy from Store ⊕ More like this 0 0 -
$91.60C&D CD2080 5/16 Inch Flare Thumbscrew Core DepressorThe C&D Valve CD2080 is installed on the end of a charging hose, the thumbscrew core depressor attaches to a 5/16" male flare with a valve core. It allows the valve core to be opened to the degree of flow desired by turning the knob clockwise. The tool will back seat & retain the gas in the charging...Buy from Store ⊕ More like this 0 0 -
$42.10C&D CD4338 3/8 Self-Piercing Line Tap ValveSelf-piercing line tap valve for 1/4", 5/16", and 3/8" tube.FEATURES:With 3 valve coresCompact knurled designCore container with wrench.INCLUDES:1 x CD4338.SPECIFICATIONS:Brand: C&DPart Number: CD4338Weight: 0.175 Pounds (lbs)Length: 1.5 Inches (In)Width: 1.3 Inches (In)Height: 1.3 Inches (In)Compos...Buy from Store ⊕ More like this 0 0 -
-
-
$98.63Buildpro Table Mount Locking C-Clamp 85mmSHPT11K - BuildPro Table Mount Locking C-Clamp 85mm Insert into 16 mm for fast hold-down clamping. Mount on the Right Angle Bracket Riser Block or Clamping Squares for push down clamping at an elevated height for taller workpieces. The patented rear crank handle allows clamp pressure adjustment whil...Buy from Store ⊕ More like this 0 0 -
$113.88BuildPro Table Mount C-Clamp 120mmSHPT14K - TABLE MOUNT LOCKING C-CLAMPS Mounts directly to any work bench drill press and fixtures. • Mounting base hole accepts standard M8 bolts and uses push-down action to hold your workpiece securely. • Use the Crank-Handle for pressure adjustment. • Rapid lock and release. Ideal for repet...Buy from Store ⊕ More like this 0 0 -
-
-
-
-
×