Din Rail / Wall Mount 6 Way Hard Wired DMX/RDM Splitter

DMX Splitter & Booster, (RDM-6 Wall Auto RDM Switching)

RDM-6Wall Splitter is a 6-output DMX/RDM splitter with DMX/
RDM pass-through supporting bi-directional communications for
discovery, addressing and DMX control of Color Kinetics and Vaya
products. This unit takes the incoming DMX/RDM signal and splits
the signal into six separate output channels allowing for expanding
the number of devices controlled from 32 to 6 X 32. The output
terminals are electronically isolated from the input & RDM-through
port and share a common ground reference. All six output ports
have an independent output driver to boost the DMX/RDM signal.

- 1:6-way DMX/RDM Splitter/Booster
- Isolated DMX/RDM Input/Outputs
- Surface or DIN-rail mountable
- Automatic switching between DMX and RDM mode for Vaya
auto-discovery

Specifications

Due to continuous improvements and innovations, specifications may change without notice.

Electrical
Input Voltage DC 12-24V input
wires for terminal connector included
Power Consumption 4.5 W max
Control
Power/Data Output Six 3-pin terminal sockets

Physical
Dimensions 195 x 105 x 21 mm (7.7 x 4.1 x 0.83 in)
(Height x Width x Depth)
Weight 250 g (8.8 oz)
Housing Material Polycarbonate
Connector/Cable Two piece compression screw terminals
Mounting Surface mount or DIN-rail mountable
Operating Temperature -10 to 35 °C (14 to 95 °F)
Storage Temperature -20 to 70 °C (-4 to 158 °F)
Certification and Safety
Certification FCC Class B, CE, ETL
Environment IP20, Interior applications

AKA Philips Showline SPLIT-6

Requires a 12 or 24 vdc power supply - not included - like this one