Konica III

!

The immediately distinguishable from the Konica II (and all its variations) thanks to the film wind lever, which is not on the top but instead on the front of the camera and invites the use of the forefinger (or thumb) of the photographer's left hand (similar to that on the Adox 300 and Zeiss Tenax). This lever needs two strokes and cocks the shutter at the same time as it winds the film. The curvaceous metal plate between the leather and lens on the II is reduced and made more rectangular. The self-timer control (where present) becomes a lever and the film rewind knob also has a fold-out crank, both of the kind then becoming conventional. The top cover is engraved Konica, below this (and much taller) III, and below this (and much smaller) NO. and the serial number. Each model has a 48mm Hexanon lens (six elements in five groups). The dimensions are 132×80×64 mm and weight is 760g.

~Perfect for a beginner through to professionals!

Overall condition - Excellent condition 9/10

~Example photos can be found here

~Camera manual can be found here

~Film for this camera can be found here

This camera has been cleaned, mechanically tested and is in full working condition. Light seals are replaced when necessary.
Return Policy

- We gladly accept within 30 days of delivery or pick up if the item arrives defective outside of the detailed conditions when purchased or if any initial defects are present upon receiving the item.