1000W Manual Panel Heater

This 1000W panel heater is easy to operate with 2 heat settings and manual controls, it will get your room warmed up in no time. Assemble its included wheels to easily move between rooms, or mount on your wall to save on floor space. Safety is a priority for us at Goldair, so this heaters safety tip-over switch will only allow it to work in an upright position, and with overheat protection, if it gets to hot it will turn itself off.

Great for Small Rooms

tab1 Where To Buy /tab1

tab1 txt /tab1 txt

tab2 Features /tab2

tab2 txt

2 Heat Settings
Adjustable Electronic Thermostat
Wall Mount or Castors
Manual Control
Safety Tip Over Switch
Overheat Protection
2 Year Warranty /tab2 txt

tab3 About The Technology /tab3

tab3 txt Panel heaters are convection heaters and provide warmth based on the principle of hot air attracting cool air over a large panel surface. Air is drawn over the element and rises up through the unit and out the top through vents. Panel heaters are typically wall mounted and provide efficient heating in lounges, hallways and bedrooms. /tab3 txt

tab4 Specifications /tab4

tab4 txt

Dimensions: H: 455mm, W: 590mm, D: 275mm.
Weight: 3.8kg
Wattage: 1000W
Warranty: 2 Years

/tab4 txt

tab5 User Manual /tab5

tab5 txt Check out the User Manual for safety, operational and installation instructions. /tab5 txt

tab6 Frequently Asked Questions /tab6

tab6 Frequently Asked Questions /tab6
tab6 txt How does a mechanical thermostat work?
This heater has a mechanical thermostat that cannot be set to a specific temperature.

The best way to set one is to turn it up to full (rotate it clockwise all the way until it stops) then when the room reaches a temperature you are comfortable with, then slowly turn it back until it just clicks off. You should hear it 'click'.

Then just leave it at that position and the heater will cycle on and off to maintain the comfort level you have selected.

Can I mount this heater on a wall?
Yes, this panel heater comes with a bracket on the back to be used for wall mounting. This helps save valuable floor space. This heater has been specifically safety tested to be mounted on the wall.

Can I take off the wheels/castors on this heater?
Yes, you can remove the castor plates from this metal panel heater if you decide you want to wall mount it.
You may find that when the castor plates were installed, there were 1-way screws used which means you will not be able to use a screwdriver to remove them.
You may need to use a pair of pliers to unscrew them or failing that use a drill to remove the head of the screw and then you should be able to remove the castor plates. Remember to remove the remaining part of the screw as it will be sharp.

/tab6 txt

title Features /title

img1 https://cdn.shopify.com/s/files/1/0371/1693/6327/files/2heatSetting.png?v=1626986754 /img1

title1 2 Heat Settings /title1
desc1 Select your level of warmth /desc1

img2 https://cdn.shopify.com/s/files/1/0371/1693/6327/files/adjustableThermo.png?v=1626986754 /img2

title2 Adjustable Thermostat /title2
desc2 Easily maintain your desired temperature /desc2

img3 https://cdn.shopify.com/s/files/1/0371/1693/6327/files/safetyTiltSwitch.png?v=1626986755 /img3

title3 Safety Tilt Switch /title3
desc3 Operates only in an upright position /desc3

img4 https://cdn.shopify.com/s/files/1/0371/1693/6327/files/overheatSetting.png?v=1626986755 /img4

title4 Overheat Protection /title4
desc4 Turns off if it gets too hot /desc4

img5 https://cdn.shopify.com/s/files/1/0371/1693/6327/files/wallMountableOrCastors.png?v=1626986755 /img5

title5 Wall Mountable Or Castors /title5
desc5 Ultimate flexibility of use /desc5