Shop for all in Fazcorp

Our GEN-3 LFP battery uses the latest EVE A-Grade prismatic cells for maximum cycle life, making this battery ideal for a back-up power supply and an excellent choice for storing solar energy. The BMS software is compatible with most inverter and charge controller brands. Over the past nine years, o...

The 6A fuse provide overload and short-circuit protection to protect the solar array and are suitable for use on solar arrays with voltages under 1000VDC. These fuses are compatible with our 1100VDC fuse holder. Specifications: Dimension: 10mm x 38mm Rated Operational Voltage: 1000VDC Rated Operational Current: 6A Rated Power Dissipation

The 10A fuse provide overload and short-circuit protection to protect the solar array and are suitable for use on solar arrays with voltages under 1000VDC. These fuses are compatible with our 1100VDC fuse holder. Specifications: Dimension: 10mm x 38mm Rated Operational Voltage: 1000VDC Rated Operational Current: 10A Rated Power Dissipation

The 16A fuse provide overload and short-circuit protection to protect the solar array and are suitable for use on solar arrays with voltages under 1000VDC. These fuses are compatible with our 1100VDC fuse holder. Specifications: Dimension: 10mm x 38mm Rated Operational Voltage: 1000VDC Rated Operational Current: 16A Rated Power Dissipation

The 20A fuse provide overload and short-circuit protection to protect the solar array and are suitable for use on solar arrays with voltages under 1000VDC. These fuses are compatible with our 1100VDC fuse holder. Specifications: Dimension: 10mm x 38mm Rated Operational Voltage: 1000VDC Rated Operational Current: 20A Rated Power Dissipation

The 25A fuse provide overload and short-circuit protection to protect the solar array and are suitable for use on solar arrays with voltages under 1000VDC. These fuses are compatible with our 1100VDC fuse holder. Specifications: Dimension: 10mm x 38mm Rated Operational Voltage: 1000VDC Rated Operational Current: 25A Rated Power Dissipation

The 32A fuse provide overload and short-circuit protection to protect the solar array and are suitable for use on solar arrays with voltages under 1000VDC. These fuses are compatible with our 1100VDC fuse holder. Specifications: Dimension: 10mm x 38mm Rated Operational Voltage: 1000VDC Rated Operational Current: 32A Rated Power Dissipation

This water resistant IP65 Rated outdoor and indoor circuit breaker enclosure is suitable for off grid solar and on grid solar installations. The clear cover provides extra protection from water ingress and ensures a tight weather seal when not in use. Each circuit breaker enclosure is supplied with ...

This water resistant IP65 Rated outdoor and indoor circuit breaker enclosure is suitable for off grid solar and on grid solar installations. The clear cover provides extra protection from water ingress and ensures a tight weather seal when not in use. Each circuit breaker enclosure is supplied with ...

Solar Panel End Clamp is for clamping the edge of a solar panel to the mounting rail, the end clamp is designed to work with our mounting rail and will work with a framed solar panel that is 35mm thick. Made from Aluminium and is supplied with a stainless steel M8 bolt Recommended torque for M8 Bolt...

This solar DC fuse holder is DIN rail mountable and is compatible with our 38mm 6A, 10A, 16A, 20A, 25A and 32A fuses(fuses sold separately to fuse holder). The fuses provide overload and short-circuit protection to protect the solar array and are suitable for use on solar arrays with voltages under ...

This solar DC fuse holder is DIN rail mountable and is compatible with our 85mm 20A, 32A, 40A and 50A fuses(fuses sold separately to fuse holder). The fuses provide overload and short-circuit protection to protect the solar array and are suitable for use on solar arrays with voltages under 1500VDC V...

This waterproof IP66 Rated outdoor and indoor circuit breaker enclosure is suitable for off grid solar and on grid solar installations. The spring loaded clear cover provides extra protection from water ingress and ensures a tight weather seal when not in use. Each circuit breaker enclosure is suppl...

This waterproof IP66 Rated outdoor and indoor circuit breaker enclosure is suitable for off grid solar and on grid solar installations. The spring loaded clear cover provides extra protection from water ingress and ensures a tight weather seal when not in use. Each circuit breaker enclosure is suppl...

MPPT solar charge controllers are programmed with a Maximum Power Point Tracking algorithm that allows the solar charge controller to track/calculate the maximum power output of a solar panel or solar array at any given time to a 99% rate of accuracy. Due to the accuracy of the MPPT algorithm and th...

MPPT solar charge controllers are programmed with a Maximum Power Point Tracking algorithm that allows the solar charge controller to track/calculate the maximum power output of a solar panel or solar array at any given time to a 99% rate of accuracy. Due to the accuracy of the MPPT algorithm and th...

Our 200W Half Cut Mono-PERC solar panels are suitable for off-grid installations and have been manufactured with high efficiency PERC A-grade cells. The solar panel glass front is tempered for strength and has low-iron content to give it greater transparency for higher light transmission. Using Mono...

Our 340W Mono-PERC solar panels are suitable for off-grid installations and have been manufactured with high efficiency Half Cut PERC A-grade cells. The solar panel glass front is tempered for strength and has low-iron content giving it greater transparency for higher light transmission. Specially t...

This 6mm2 Black Solar Cable is marine-grade and is suitable for use with DC or solar applications in compliance with AS/NZS5033. The XLPO(Cross-Linked Polyolefin) solar cable insulation is UV resistant, flame retardant and halogen free. A voltage drop calculation of 3% or less is required when calcu...

Our 460W Mono-PERC solar panels are suitable for off-grid installations and have been manufactured with high efficiency Half Cut PERC A-grade cells. The solar panel glass front is tempered for strength and has low-iron content to give it greater transparency for higher light transmission. The specia...

Our 420W Mono-PERC solar panels are suitable for off-grid installations and have been manufactured with high efficiency Half Cut PERC A-grade cells. The solar panel glass front is tempered for strength and has low-iron content givng it greater transparency for higher light transmission. Specially te...

Our 380W Mono-PERC solar panels are suitable for off-grid installations and have been manufactured with high efficiency Half Cut PERC A-grade cells. The solar panel glass front is tempered for strength and has low-iron content giving it greater transparency for higher light transmission. Specially t...

This Low-Fequency off-grid solar inverter/charger features the combined functions of a 6KW pure sine wave inverter, 120A MPPT solar charger and 60A AC battery charger to offer an uninterruptible power supply. The built in transformer allows for a 5 second 18KVA surge when using devices or appliances...

MPPT solar charge controllers are programmed with a Maximum Power Point Tracking algorithm that allows the solar charge controller to track/calculate the maximum power output of a solar panel or solar array at any given time to a 99% rate of accuracy. Features: Genuine MPPT solar charge controller w...