Matek Mini PDB With BEC 5V And 12V

Mini POWER HUB has been designed to provide the best possible performance and reliability in a small 36 36mm PCB. The HUB distributes power from a battery pack to 4 ESCs, as well as providing synchronised & regulated DC outputs for powering cameras, servos, video transmitters, LEDs,. Batteries may range from 3S to 6S LiPo. The HUB also features convenient solder bridge of various voltage for camera & video TX. Specifications General:

- Input voltage range (3S-6S operation): 9 - 26VDC
- Regulated 5V and 12V outputs
- LED power indicators ( 5V & 12V outputs )
- 4 ESC outputs ESC outputs:

- Continuous current: 20A per output
- Peak current (10 seconds/minute): 25A per output BEC 5V output:

- Designed for RC Receivers, Flight controllers, OSD, and Servos.
- DC/DC synchronous buck regulator, Efficiency is up to 95%.
- Voltage: 5.0 /- 0.1VDC
- Continuous current: 3 Amps
- Short-circuit tolerant (10 seconds/minute)
- LED (indicates voltage is in regulation) BEC 12V output:

- The battery should be 4S~6S LiPo
- Standard output designed to power cameras and video transmitters,etc.
- Voltage: 12.0 /- 0.2VDC
- Continuous current: 2 Amps (Max.3A 10s/minute)
- Short-circuit tolerant (10 seconds/minute)
- LED (indicates voltage is in regulation) CAM & VTX voltage bridge

- 3S operation. choose “VCC" for 12V camera & 12V VTX, VCC=Battery Voltage.
- 4~6S operation, choose “12" for 12V camera & 12V VTX
- 3~6S operation, choose “5" for 5V camera
- Video pass through from the “CAM" pad to the “VTX" pad Physical:

- Dimensions: 36 x 36mm
- Weight: 6g
- Mounting holes 30.5mm square spacing