Craftsman Sports Claim this Business♡
×-
$222Krieghoff Front Hanger, Steel blackKrieghoff factory front hanger allows changes in point of impact of bottom barrel. Available for both Choke-tubed and Fixed choke barrel configurations. Please note that Briley or Teague choked K-80 will have a Fixed Choke barrel profile so choose the hanger for fixed choke barrels. The change in po...Buy from Store ⊕ More like this 0 0 -
$322Krieghoff Front Hanger TitaniumTitanium Front hanger for your K-80. Particularly aimed at the sporting clays market, they are available in sizes #1, #2, #3, #4, #5, #6 and #7 for choke tube barrels only. The front hangers go great with our Titanium Choke Tubes and Titanium Triggers! 12 Gauge only.Krieghoff Know How - Remove the F...Buy from Store ⊕ More like this 0 0 -
$35Front SightThe Krieghoff Bead fits all Krieghoff K-80 ribs , with easy attachment to the front using a single screw. The white or orange bead gives you excellent quick alignment with the target and is highly visible even in fading light. Easy fitting using a single screw and small screwdriver. Includes sight and screw. With the exception of some early Trap Models.Krieghoff thread size is 2.5mm (M2.5×0.45Buy from Store ⊕ More like this 0 0 -
$38Krieghoff Stock 5 WrenchThe Krieghoff T-Handled Stock Wrench fits and removes all Krieghoff Stocks. It is a 5mm Allen head.Other Krieghoff Wrenches Available:- Trigger and Selector Locking Wrench (1.27mm Hex)- Comb Adjustment Wrench (2.5mm Hex)- Trap Special/Pro Rib Wheel Locking Wrench (1.5mm Hex)- Safety Catch Locking Wrench (2mm HexBuy from Store ⊕ More like this 0 0 -
$22Krieghoff Adjustable Comb 2.5 Wrench2.5mm hex wrench to adjust your K-80 adjustable comb.T-handle and plated shaft.Measures: 125mm LengthAn essential accessory if you have an adjustable comb.Other Krieghoff Wrenches Available:- Stock Removal Wrench (5mm Hex)- Trigger and Selector Locking Wrench (1.27mm Hex)- Trap Special/Pro Rib Wheel...Buy from Store ⊕ More like this 0 0 -
$9.50Krieghoff Ejector Ball and Spring Set for K80-K20This is a set that includes one ball and one spring for the newer style K-80 & K-20 ejectors.Krieghoff Know How - Removing & Replacing the Krieghoff EjectorsBuying or receiving non-prohibited firearms or other items by mail order or through the internetBuy from Store ⊕ More like this 0 0 -
$2Krieghoff Front Hanger Roll PinThis is the Pin ONLY for a K-80 12 Gauge Front Hanger (for both Fixed Choke and Choke Tube Hangers).The need for the correct Pin Punch is necessary.Krieghoff Know How - Remove the Front HangerBuy from Store ⊕ More like this 0 0 -
$25Krieghoff Pin PunchesFront hanger removal and replacement pin punches. 1.4mm diameter, the correct size to drift out the hanger cross pin without damage. 0.9mm diameter, the correct size to pass up the center of the hollow cross pin to provide support whilst it is replaced.The pin punch is used to drive objects using a ...Buy from Store ⊕ More like this 0 0 -
$6.64Krieghoff Safety Locking Screw 2mm WrenchOn all K-80 guns the safety catch can be locked in the forward, off, position. This is intended for competition use only as the gun not closed until safely on the firing point. To lock the safety you need to first remove the stock. The locking screw is located on the right-hand side of the top strap...Buy from Store ⊕ More like this 0 0 -
$6.64Krieghoff Trap Special & Pro Rib Adjustment Wheel Locking 1.5 WrenchThis is a 1.5mm Hex Wrench used to loosen and tighten the adjustment wheel on the K-80 Trap Special Barrels and also the K-80 Pro Rib Barrels. You start by slacking the locking screw to allow the wheel to be turned. Then use the wheel to adjustable the height of the rib. Then tighten the locking scr...Buy from Store ⊕ More like this 0 0 -
$6.64Krieghoff Trigger and Selector Locking 1.27 WrenchThis wrench is 1.27mm, 0.050", and is the correct size to adjust the trigger position on your K-80 or K-20. The same wrench locks and unlocks the barrel selector. Please note: When adjusting the trigger position you must also loosen the front selector locking screw in the trigger blade. This is beca...Buy from Store ⊕ More like this 0 0 -
$333Nickel Trigger – Three SizesThe K-80 Nickel Trigger Blade. The Nickel Trigger is now available in three sizes; Standard, Short and Wide (the wide trigger is 12 mm wide).This Trigger blade fits all new model K-80 guns. It is suitable for K-80 owners with a forward position blade fitted who need the trigger to sit further back. ...Buy from Store ⊕ More like this 0 0
×