Banjo MFM300 3 inch open bore magnetic flow meter with fittings kit (6 x AA batteries included) 53 to 2500 lpm
Banjo MFM300 3 inch open bore magnetic flow meter (with fittings)
Includes 6 x AA batteries
3 inch flange type ports
Includes fitting kit:
2 x 3 inch BSP(M) threaded adapters
2 x 3 inch (75 mm) hose tails
2 x clamps and flange gaskets
Displays overall total volume and batch total volume
US gallons and litres
6 digits for rate, 8 digits for total and 1 decimal place reading in tenths
Magnetic style meter with stainless steel electrodes
Self-calibrating
Measures water and most conductive liquids
Easy to change six (6) AA batteries
No moving parts to fail during use
Glass-reinforced polypropylene
Temperature range from -18° C to 65° C (0°F to 150°F)
Accuracy is 99% from 53 to 2500 lpm (14 to 670 US gallons per minute) for 3 inch
3 photo-eyes located on the face of the flow-meter
Note : these are not push buttons, to activate you must hold your finger over the photo-eye for 2 to 4 seconds
Installation tip:
Have at least 700 mm of straight pipe before and after the flow meter
General information:
The 3 inch Banjo flow meter series are a full-bore, plastic-bodied electromagnetic flow meter designed for flow and usage monitoring applications in 3 inch pipe.
The polypropylene flow tube offers corrosion resistance to a wide range of chemicals.
Its light weight and clamp flanges allow it to be easily installed or removed from the pipe for inspection.
There are multiple configurations.
With no moving parts, the mag meter permits unobstructed flow, minimizing flow disturbances.
The 3 inch meter series can be used in piping configurations where there is little space between the meter and valve.
The 3 inch meter series, like other mag meters, are resistant to wear from debris.
Since there are no bearings or propeller to wear out, downtime and maintenance are kept to a minimum.
Because there are no mechanical parts in the flow stream, the meter tolerates high flows without damage.
Please note that flow does not automatically turn the meter on.
The hinged, polyethylene cover protects from dust and UV rays, while permitting easy access to the LCD flow rate and total display.
The electronics housing is made of rugged powder-coated die-cast aluminum.
Flow rate and total can be displayed in a variety of units, customer-selected and factory-set.
The 3 inch meter series are used for tracking flow rates and total flow in usage monitoring applications.
These would include wells,industrial wastewater, leach mining discharge, cooling tower deduct metering, turf and landscape applications, and other water reclamation operations.
When changing the batteries, the 3 inch are designed to retain the internal settings and flow total.
The flow meters are externally powered via a 5-pin connector cable (20 ft/6 m) which also provides pulse output for use with a variety of displays and controls for remote reading, data logging, pulse-to analog conversion, and telemetry applications.
The flow meters are a battery-operated unit for use when pulse output is not required.
The batteries are user replaceable with an approximate 1-year life under continuous use, or more depending on the duty cycle.
The flow meters shut off after minutes of inactivity to preserve battery life.
Applications:
Water use monitoring
Irrigation
Industrial wastewater discharge monitoring
Cooling tower deduct metering
Heap leach mining discharge monitoring
Well monitoring
Turf and landscape water monitoring
Agriculture liquid monitoring
Household water use
Note:
Not suitable for petroleum based liquids