Polymer Clay Water Slide Transfer - 4 Patterns

These beautiful water slide stencils are great for adding detail to any earring creation.

Instruction
- Roll out clay to the desired thickness - note: transfers are best paired with lighter colours so you can see the detail.
- Cut from sheet the size of transfer sheet you want to use.
- Lay cut piece pattern side down on to the clay and use and acrylic roller over the top to remove any air bubbles that may have become trapped
- Take a wet cloth and place it on the back of the paper until it is soaked (like a childs temporary tattoo)
- Once saturated, wait for 30 seconds and then carefully slide the white paper away from the clay, leaving the pattern behind.
- Let the transfer dry on the clay - do not touch the pattern or try to dry with a tissue or it may come off, but any water around the clay you can dab away.
- Once dry, you can use your favourite clay cutters to make beautiful earrings
- After baking your polymer clay pieces, it would be best to seal to make sure the pattern doesn't come off.