MO750 Wearable C-section model

Materials

Skin safe Silicone, Silicone & plastic tubing

Preparation

- Attach baby Aiden to the placenta with the umbilical cord.
- Fill the baby's belly reservoir with 10cc blood and liquid soap if umbilical cannulation is required.
- Lubricate the baby with a hair conditioner or personal water-based lubricant, then insert it into the uterus.
- Place the placenta inside the uterus.
- Optionally, add amnion fluid with a latex-free condom filled with warm water and blood.
- Close the uterus and place it inside the model base, then cover it with the pregnant belly. Simulation recommendations

- Carefully perform a simulated C-section, following standard procedures.
- The baby and placenta can be removed, and the umbilical cord separated. Cord wraps around the stump on the baby.
- The uterus and belly skin can be sutured with a round needle only.

Additional Scenarios

- Cord collapse scenario: Cut out the vagina opening in the vulva. Lubricate the cord and place the placenta inside the belly close to the vagina opening and drop the cord through the opening.
- PPH scenario: lead the extra tube through the uterus opening if the bleeding occurs during the c-section. If the hemorrhaging occurs during a vaginal birthing situation, lead the tube close to the vagina opening. Connect the other side to a syringe idled with blood or any other blood pump system.
- Bloodlines for the IVC and Aorta are included, allowing additional training with a pregnant patient. To use the lines attach longer bloodlines and blood pumps. You can form a loop by connecting the 2 lines with the included connector tube.

Care & Repair

- Both the uterus and belly skin can be repaired after use. Follow the included instructions for cleaning, mixing silicone components, and curing.
- Warnings and Recommendations:

- Don’t submerge baby in full water, the baby's lungs will fill with water.
- Use a round needle for suturing where possible.
- Only glucose-free blood mixed with liquid soap is recommended.

MEDICFX guarantees that all products supplied will uphold high standards of quality and will adequately serve the purpose(s) as specified in their descriptions. In the unlikely event of a product being faulty or damaged upon receipt, the customer must notify MEDICFX within one week, including a photo of the damage as evidence. If it is determined that the fault or damage was due to manufacturing, MEDICFX commits to either repair, replace, or refund the faulty product according to the customer's preference.

Furthermore, MEDICFX provides a six-month warranty specifically for the silicone parts of your model. Under normal, gentle usage, no rips or tears should occur. Please note, however, that the hairwork on our models is not covered under this warranty.

Copyright MedicFX, New Zealand

www.medicfx.com

Care & Repair

- Both the uterus and belly skin can be repaired after use. Follow the included instructions for cleaning, mixing silicone components, and curing.
- Warnings and Recommendations:

- Don’t submerge baby in full water, the baby's lungs will fill with water.
- Use a round needle for suturing where possible.
- Only glucose-free blood mixed with liquid soap is recommended

MEDICFX guarantees that all products supplied will uphold high standards of quality and will adequately serve the purpose(s) as specified in their descriptions. In the unlikely event of a product being faulty or damaged upon receipt, the customer must notify MEDICFX within one week, including a photo of the damage as evidence. If it is determined that the fault or damage was due to manufacturing, MEDICFX commits to either repair, replace, or refund the faulty product according to the customer's preference.

Furthermore, MEDICFX provides a six-month warranty specifically for the silicone parts of your model. Under normal, gentle usage, no rips or tears should occur. Please note, however, that the hairwork on our models is not covered under this warranty.