Reflow Recycled PETG - Clear and Natural Collection 1.75mm

Flexural strain at break % 4.2 ISO 178

SAMPLE PREPARATION AND TESTING CONDITIONS
Sample preparation conditions:
Ultimaker 2 with 0.4 mm nozzle was applied for preparing both tensile
and flexural specimens.
Line width: 0.35 mm - layer height: 0.2 mm - printing speed: 20 mm/s - retraction distance and speed: 9 mm and 35 mm/s - printing temperature: 230 ºC - fan speed: 40% - infill percentage: 100% - outline overlap: 35%
Testing conditions:
Five samples were tested and the value shared was the average value.
For tensile specimens, they were printed flatly (x-y direction ) and the printing direction
was in line with the tensile stretching direction. As for the flexural specimens, the printing direction was perpendicularly to the test direction.

DISCLAIMER
The values and recommendations provided herein are given or accepted at your own responsibility. In view of variations in maintenance or processing, neither Reflow nor its aliates provide any warranty for their use. You must make your own determination of its suitability and completeness for your specific use, for the protection of the environment, and for the health and safety of your employees and purchasers of your products.