eSun PLA+1.75mm Refilament 1 kg Original

Refilament PLA is essentially regular PLA but comes without the plastic spools. Help save the environment by re using your old spools. Use a 5mm allen(hex) key to unscrew an old eSun spool. Otherwise head to the link below for instructions and the STL file to print your own spool.
http://www.esun3d.net/products/228.

You can also buy an eSun reusable spool from the link below
https://www.bits4bots.co.nz/products/esun-3d-filament-spool-for-refilament?variant=40524152995995

B iomaterial extracted from corn grain, natural degradable and pollution-free for environment; high rigidity, good gloss and transparency; printing process is non-toxic and tasteless, no curling.

PLA has additional additives added into its regular PLA. These additional additives improve the strength of the filament (at least 2 times tougher than regular PLA). PLA has a higher tendency to snap under pressure, where PLA is more likely to bend. It also gives a smoother surface finish. PLA is also better with dealing with bridging and overhangs so there is less stringing and supports are not required as often.

PLA is our best seller as it is a very easy to use filament. You will need to print at a slightly higher temperature than regular PLA. We recommend PLA especially for those larger prints.

Advantage:
- Neat winding, avoid filament tangle
- Reduce the waste of empty spools

DISCLAIMER: BITS4BOTS LIMITED nor any of its Subsidiaries has any material liability (whether known or unknown, whether asserted or unasserted, whether absolute or contingent, whether accrued or unaccrued, whether liquidated or unliquidated, and whether due or to become due) arising out of any injury to individuals or property as a result of the ownership, possession or use of any product manufactured, sold, leased or delivered by BITS4BOTS LIMITED or any of its Subsidiaries.