37000121a Harley Screamin' Eagle Variable Pressure Clutch 37000121A
37000121A
Get more performance from the Original Equipment clutch. The Screamin' Eagle Variable Pressure Clutch is designed to help put the added power from a Screamin' Eagle Stage Kit to the pavement. This bolt-on kit harnesses the centrifugal force of spinning weights to increase the clutch capacity as engine speed increases.
• Mechanism applies increasing pressure to the stock clutch pressure plate as RPM rises
• Results in high torque-handling capabilities without increasing clutch lever effort at idle
• Variable pressure clutch also provides smoother clutch disengagement at lower speed
• Kit fits behind most stock derby covers with no modifications
• See installation manual for additional accessory derby cover fitment information
• To match the performance demands of your engine, team the Variable Pressure Clutch with your choice of clutch diaphragm springs - We recommend the higher capacity Screamin' Eagle Diaphragm Spring P/N 37951-98 for major performance upgrades
FITMENT INFORMATION
Fits '99-'17 Evolution 1340 and Twin Cam-equipped models. Will not fit '16-later Touring and Trike models, '15-later FLHTCUL or FLHTKL models or '07-later Touring or Trike models equipped with Narrow Profile Outer Primary Cover P/N 25700385 or 25700438. Will not fit '13-later CVO models with hydraulic actuated clutch, '16-'17 FXDLS, FLSS and FLSTFBS, or '14-later Touring and Trike models equipped with Screamin' Eagle A&S Clutch Kit P/N 37000026. Derby Covers P/N 25001-03, 25441-04A, 25770-99, 25331-10, 25339-10, 25700250 and 25700062 require Spacer Kit P/N 37000123. Does not fit Derby Covers P/N 25347-02 or 25345-01.
These Screamin' Eagle products are 50-State U.S. EPA compliant for sale and use on all applicable vehicles, including those that are pollution controlled. See Genuine Motor Parts and Accessories or Screamin' Eagle Accessories catalog for fitment information. Screamin' Eagle Performance products are intended for the experienced rider only.
0
0
Get more performance from the Original Equipment clutch. The Screamin' Eagle Variable Pressure Clutch is designed to help put the added power from a Screamin' Eagle Stage Kit to the pavement. This bolt-on kit harnesses the centrifugal force of spinning weights to increase the clutch capacity as engine speed increases.
• Mechanism applies increasing pressure to the stock clutch pressure plate as RPM rises
• Results in high torque-handling capabilities without increasing clutch lever effort at idle
• Variable pressure clutch also provides smoother clutch disengagement at lower speed
• Kit fits behind most stock derby covers with no modifications
• See installation manual for additional accessory derby cover fitment information
• To match the performance demands of your engine, team the Variable Pressure Clutch with your choice of clutch diaphragm springs - We recommend the higher capacity Screamin' Eagle Diaphragm Spring P/N 37951-98 for major performance upgrades
FITMENT INFORMATION
Fits '99-'17 Evolution 1340 and Twin Cam-equipped models. Will not fit '16-later Touring and Trike models, '15-later FLHTCUL or FLHTKL models or '07-later Touring or Trike models equipped with Narrow Profile Outer Primary Cover P/N 25700385 or 25700438. Will not fit '13-later CVO models with hydraulic actuated clutch, '16-'17 FXDLS, FLSS and FLSTFBS, or '14-later Touring and Trike models equipped with Screamin' Eagle A&S Clutch Kit P/N 37000026. Derby Covers P/N 25001-03, 25441-04A, 25770-99, 25331-10, 25339-10, 25700250 and 25700062 require Spacer Kit P/N 37000123. Does not fit Derby Covers P/N 25347-02 or 25345-01.
These Screamin' Eagle products are 50-State U.S. EPA compliant for sale and use on all applicable vehicles, including those that are pollution controlled. See Genuine Motor Parts and Accessories or Screamin' Eagle Accessories catalog for fitment information. Screamin' Eagle Performance products are intended for the experienced rider only.
×