Discover more like High-Pressure Fuel Pump Kit For B8/B8.5 Audi A6/A6/Q5/S4/S5/SQ5

Audi TTRS 2012-2013 8J 2.5 TFSI

NOTE This product is not currently stocked in store, takes 2-5 working days to get in - High pressure model - F90000295 - Same basic fuel pump as F90000285 but with no check valve. If running two of these pumps we recommend either the FPTI285K or running external check valves - Dual channel turbine ...

VW Passat 2006-2010 B6 2.0T FSI

This is a repair service for this particular BCM that can have an intermittent or constant faulting fuel pump output from the BCM. 1 year warranty on the repair. No programming needed, just plug and play. We carry parts in stock so we can quickly get your BCM repaired and back on the road.

This hardware kit contains all hardware required to install a lower front control arm kit for late model B8.5/C7.5 vehicles with M14 hardware. All hardware is high-quality OEM plated. Fitment: - 2012 - 2016 Audi A4 (B8/B8.5) - 2012 - 2017 Audi S4 (B8/B8.5) - 2012 - 2017 Audi A5 (B8/B8.5) - 2012 - 20...

This hardware kit contains all hardware required to install a lower front control arm kit for early model B8/C7 vehicles with M12 hardware. All hardware is high-quality OEM plated. Fitment: - 2009 - 2011 Audi A4 (B8) - 2010 - 2011 Audi S4 (B8) - 2008 - 2011 Audi A5 (B8) - 2008 - 2011 Audi S5 (B8) - ...

HO12-963 - HOLLEY 470LPH E85 FUEL PUMP Part Number: HO12-963 Holley offers a full line of high performance fuel pumps. These Holley electric in-tank fuel pumps have been designed to the highest quality standards to provide increased performance and fuel efficiency for most stock, turbo, and supercha...

034Motorsport is proud to offer this high-quality Supercharger Pulley Upgrade for the B8/B8.5 Audi S4/S5/Q5/SQ5 C7/C7.5 Audi A6/A7 3.0T FSI At 57.70mm in diameter, the 034Motorsport 3.0 TFSI Supercharger Pulley is significantly smaller than the factory unit in order to increase the drive ratio of th...

3.5 GPM PUMP KIT 13 l/min (35 GPM) wash down kit conveniently includes a high capacity Aqua Jet WD 3.5, 5 bar (70 psi). 5.2 GPM PUMP KIT 20 l/min (5.2 GPM) wash down kit conveniently includes a high capacity Aqua Jet WD 5.2, 5 bar (70 psi). PUMProtector inlet strainer, spray nozzle, bulk head fittin...

Walbro fuel pumps are true OE-quality, you will need a Walbro high pressure fuel pump to properly support your vehicles engine if you do a lot of performance modification. Use these fuel pumps to provide fuel pressure needed to supply the engine under heavy loads of power At Scarles we recommend any...

The 034Motorsport 3.0 TFSI Supercharger 190mm Crank Pulley Upgrade for the B8/B8.5 Audi S4/S5/Q5/SQ5 C7 Audi A6/A7 is an easy way to increase supercharger rotational speed to provide more boost to your engine. This kit works with both the OEM supercharger pulley and the 034Motorsport 3.0 TFSI Superc...

The 034Motorsport 3.0 TFSI Supercharger 179mm Crank Pulley Upgrade for the B8/B8.5 Audi S4/S5/Q5/SQ5 C7 Audi A6/A7 is an easy way to increase supercharger rotational speed to provide more boost to your engine. This kit works with both the OEM supercharger pulley and the 034Motorsport 3.0 TFSI Superc...

Walbro fuel pumps are true OE-quality, you will need a Walbro high pressure fuel pump to properly support your vehicles engine if you do a lot of performance modification. Use these fuel pumps to provide fuel pressure needed to supply the engine under heavy loads of power At Scarles we recommend any...

034Motorsport is proud to offer the ultimate rear sway bar upgrade for the B8/B8.5 Audi Q5/SQ5 C7/C7.5 A6/S6/RS6, A7/S7/RS7 The 034Motorsport Adjustable Solid Rear Sway Bar is made from a single piece of high-quality, 25.4mm thick spring steel for maximum rigidity, and is designed to combat underste...

All necessary parts to replace the fuel pump module. Features: - Includes complete module, retaining nut and gasket. - Restores lost performance or non-functioning fuel pump with this economical solution. - Pump draws less current than OEM counterpart while maintaining the same flow rate at working ...

All necessary parts to replace the fuel pump module. Features: - Includes complete module, retaining nut and gasket. - Restores lost performance or non-functioning fuel pump with this economical solution. - Pump draws less current than OEM counterpart while maintaining the same flow rate at working ...

HP AZX1307 Electric Fuel Pump 12V - Dual Polarity. High pressure 12 Volt with minimum flow of 56 litres per hour - pressure 2 to 2.7 psi. Popular applications: Jaguar Daimler models fitted with SU fuel pumps. MGB (alternator models) Triumph Stag. Description from SU: - The AZX 1300 series pump is a ...

All necessary parts to replace the fuel pump module. Features: - Includes complete module, retaining nut and gasket. - Restores lost performance or non-functioning fuel pump with this economical solution. - Pump draws less current than OEM counterpart while maintaining the same flow rate at working ...

034Motorsport is proud to offer this high-quality Supercharger Pulley Removal Tool for the B8/B8.5 Audi S4/S5/Q5/SQ5 C7/C7.5 Audi A6/A7 3.0T FSI This pulley removal tool features precision machined half-shells designed to perfectly clamp the supercharger pulley for easy removal. The durable low-carb...

SU Genuine Burlen 12V Fuel Pump pull-type for bulk head mounting - AUA25. Low pressure 12V SU electric fuel pump with points, suitable for positive or negative earth vehicles. As fitted to: Land Rover, Early Morris Minor, MG TC TD TR, Riley and a wide range of other early vehicles, but also suitable...

The factory front lower control arms are an integral part of the B8/B8.5 Audi A4/S4, A5/S5/RS5 Q5/SQ5 suspension, but can start wearing out as early as 40,000 miles - especially on enthusiast-owned vehicles which are driven hard on the street or track. As the rubber bushings degrade and ball joints ...

SU Genuine Burlen 12V Fuel Pump pull-type for bulk head mounting - AUA66. Low pressure 12V SU electric fuel pump with points, suitable for positive or negative earth vehicles. As fitted to: Land Rover, Morris Minor, but also suitable for any car with negative or positive earth polarity requiring a low pressure pump. Uses 1/4" BSP inlet fitting and push-fit outlet. Pump Pressure: 1.5 PSI.