Discover more like Brass Needle Valve Female/Female

Female/Female Tee Handle Brass Ball Valve Applications - Hot and Cold Water - Compressed Air - Oils - Non-Aggressive Chemicals Specifications Ends: BSP F/F Body and trim: Nickel plated brass body, full bore chrome plated brass ball PTFE seats Rating: CWP - 50bar size 8mm to 30 bar size 25mm Max Temp: 150oC

Applications - Hot and Cold Water - Compressed Air - Oils - Non-aggressive Chemicals Specifications - Body and trim: Nickel plated brass body, full bore chrome plated brass ball PTFE seats - Rating: CWP - 40 bar size 15mm to 20 bar size 50mm - Max Temp 150oC

A gate valve is the most common valve for water supply systems. It represents a linear-motion isolation valve and has a function to stop or allow the flow of water. - Aust. Std AS1628 - PN20 - Dezincification Resistant Brass - Kitemark KM 06254 - Operating temperature 0.5 - 180C (see attached specification) - Thread ISO7 - RP DZR Brass Gate Valve Spec Sheet

- 316 Stainless - BSP threaded ends - Maximum pressure 900PSI / 63Bar - EPDM seal maximum temperature 120C

Female/Female Tee Handle Gas Ball Valve Applications - Industrial, Pneumatic, domestic and hydraulic installation - Hot water - Dry steam - Gasoline Fuel - Gas-Oil, Kerosene, Oils - Compressed Air - NOT suitable with methyl alcohol and saturated steam Specifications - Maximum Working Temperature 60oC - Minimum Working Temperature -20oC

Comes with a plastic screen.

- For quick and convenient access to water. - Constructed from heavy duty brass.

- 316 Stainless - BSP threaded ends - Maximum pressure 900PSI / 63Bar - EPDM seal maximum temperature 120C

Swing check valve with soft seat. Applications include use in water, other liquids and gases. Specifications Ends: Screwed BSP Body and trim: Forged brass body and flap with NBR rubber seat Rating: From 12 bar CWP for 15mm to 10 bar from 50mm

- High quality full flow valve - Smooth open and close action - Lightweight and strong - Corrosion resistant - UV Stabilised - Drinking water approved - Removable handle for security and varying applications - High pressure 16 Bar/235 psi rated - Manufactured from glass fibre reinforced nylon with polypropylene ball and nitrile rubber O-rings. AS/NZS 4020 Approved SGS M&I Approved

Comes with nitrile rubber seat Applications - Pneumatic and water systems - Air conditioning and heating systems - With strainer - a foot valve for irrigation, industrial water supply, water circulation Specifications Ends: Screwed BSP Body and trim: Brass body, Stainless steel plate, NBR seal, Stainless steel spring Rating: Up to 18 bar CWP Max temp: -30oC to 110oC

Durable tubeless valves. Vittoria Singleway tubeless valves are made of brass for higher durability. They are compatible with high-concentrated particles sealant and feature a plastic cap. Available in 40mm and 60mm, Vittoria Singleway tubeless valve can be used with the most common rim depths. The ...

Brass Quick Coupling Valve Accessories. - 25mm - For quick and convenient access to water - Constructed from heavy duty brass - Use with quick coupler key and brass swivel.

Hansen Female Tank Fittings And Short Female Tank Fittings Details Hansen Female Check Valve Hansen Check valves are used in-line as a non-return valve to stop fluids from flowing back through your system. The unique design gives you exceptional flow rates, which means you can move more water in les...

91498 - Universal Valve Core Remover / Installer Mastrecool universal valve core remover comes with a safety nut allowing the technician to freely access the valve core without fighting high pressure. It also comes with 1/2" 20UNF and 1/4" flare fittings for all applications.

For vertical or horizontal installations. The rubber coated ball is free inside the valve body to move completely out of the main flow stream to avoid restrictions and blockages common with waste water. This also requires less pressure to open than spring loaded check valve. Ball check valves are easily serviceable via the removable ball cover plate.

25mm brass Quick Coupling Valve Key - For quick and convenient access to water. - Constructed from heavy duty brass.

Specifications6000 PSI Rating Ends: Screwed BSPT Body and trim: 316SS, PTFE Packing Rating: 413 Bar

You can extend the length of 2 piece Presta valves by using the Valve Extender, available in 2 lengths 20mm and 50mm. You may attach and remove valve cores by using the Valve Core Tool. The Valve Core Tool can be used as a valve cap.

Applications - Industrial, pneumatic, domestic and hydraulic installation - Hot water - Dry steam - Gasoline and fuel - Gas-oil, kerosene, oils - Compressed air - NOT suitable with methyl alcohol and saturated steam Specifications - Maximum working temperature 60oC - Minimum working temperature -20oC

Operating Temperature Range 1 C - 60 C Compatible with Threaded Fittings s are compatible with any Threaded fitting of the appropriate size

Stan's NoTubes Universal Presta Valve Set (Pair) - Brass - Durable brass construction - Removable valve core makes adding sealant easy - Fits up to 8mm valve hole The original and still the best tubeless valve stem for most rims and a perfect fit for all Stans BST rim models. Weighs only 16g, 18g and 21g per valve respectively for the 35mm, 44mm and 55mm models. Sold as a pair.

. A ball valve is a flow control device which uses a hollow, perforated and pivoting ball to control liquid flowing through it. It is open when the ball's hole is in line with the flow inlet and closed when it is pivoted 90-degrees by the valve handle, blocking the flow. Full Flow: Minimum head loss...