Shop for all in Fence construction - except agricultural

Nylon Rack with steel core for quiet operation. Each unit is 1m long. Comes with self drilling mounting screws and washers. Part Number # AAC1

Stagnoli heavy-duty nylon gear rack for cantilever gates to 1200kg. Made in Italy.

Stagnoli nylon gear rack for cantilever gates to 800kg. Made in Italy.

Stagnoli heavy-duty nylon gear rack for sliding gates to 1200kg. Made in Italy.

$1,350.00 Available on back-order

$1,459.00 Robus400 Motor. Italian made. 24 month warranty. 230 vac / 24vdc 400kg gate maximum capacity. Mechanical limit switch. Control unit already installed. Part # RB400

Back up battery for those unexpected power cuts. Part # KT/SLG/LF/BB

$1,656.00

$922.00 $1,082.08 Deus High Performance Gate Motor Italian Made. 3 year factory warranty. 230 v ac supply and 24v dc motor. Back up battery capable 600kg gate maximum capacity. Control unit already installed. Part Number # DEUS6HP

$860.00 $1,020.08 Deus High Speed Gate Motor Italian Made. 3 year factory warranty. 230 v ac supply and 24v dc motor. Back up battery capable 400kg gate maximum capacity. Control unit already installed. Part Number # DEUS4HS

$894.00 $1,054.00 Life Acer Gate Motor Italian Made. 3 year factory warranty. 230v ac or 24v ac power supply and 24v dc motor. Back up battery capable 300kg gate maximum capacity. Control unit already installed. Part Number # AC3RM DL Easy

Remote control for gate. Recessed button feature. Part Number # Maxi2

Infrared photocells prevent the gates from closing when objects pass through their beam. This prevents gates closing on people or moving cars. can also be used to open gates automatically as you approach the gates. Part Number # Visio

$1,116.00 Armor 24v Motors, one master with preinstalled control unit and one slave motor. Italian Made. 3 year factory warranty. 230v supply 2m gate maximum leaf. Part Number # ARMOR

Wireless keypad for visitor access. Great for people like delivery drivers, meter readers or friends and family that dont need a remote. Up to 16 different codes can be easily changed. Part # WI

Extended Arms make life easier when the motor to gate pivot are further away or off set more than normal. Typical situations are when gates are mounted mid or to the front of wide columns. Complete with brass bushes and SS pins. Part Number # ARMAX (sold in single sets

Wireless keypad for visitor access. Ideal for delivery people, gardeners, friends and family. No keys required and codes can easily be altered by you. Part # EDSW

Remote controller for operating the Robus400 gate motor. Hangs from keyring or a hook. Part # FLO2R-S

Remote control for the Nice range of gate automation controllers. Can be dash mounted in the cradle or hung on keyring. Part # FLO2RE

Photocells to prevent the gates closing on obstructions or cars when they break the light beam. Can also be used to automatically open the gates. Part Number # EPM

Back up battery for those unexpected power cuts. Part # PS124 Available on back-order

Aerial gives the remote control extended reception distance allowing you to open the gate from further away. Part # ABF

$1,375.00 The Starter Kit has the basic parts required to automate medium sized residential swing gates. The 240vac/24vdc linear gear motor provide reliability and strength for purpose. Adjustable mounting brackets. Suitable for 1 x 3.5m leaf. Italian made. 24 month warranty. Part # WINGO3524SKT Not...

$1,880.00

$1,897.00

2m Swing Gate Motors made in Italy, complete starter installation kit for DYI and Trade access solutions. Double swing gates. 230/24v

$1,684.00 Italian Quality 3 Year Factory Warranty if installed by a competent installer.

$1,227.00

Tuned antenna increases the range for receiving the open and close signals from your remote. Lets you activate the gates before you arrive and have to stop or wait for them to open. Part # SKANT

Handle sets available as aluminium or stainless-steel for Locinox Insert Locks.

Euro-profile lock cylinder for Locinox Insert Lock with three keys.

Covers for Locinox insert locks.

Black LED light for fences gates.

Intralec electric gate strike for 40-50mm posts.

Joins two 4m arms to make 8m arm for Bionik-8 barriers.

Venus is the world's first true motorised operator designed specifically for outdoor pedestrian gates.

Antenna

The REFLEX-180 safety photocells ensure that the gate won't close on a vehicle or person.

The EYE-METAL safety photocells ensure that the gate won't close on a vehicle or person.

The Flips-Bat safety photocells ensure that the gate won't close on a vehicle or person.

Articulated long arm for Ayron series.

Safety edges are sensors designed to protect people from the hazards of automated gates and doors.

Wireless Transmitter for Safety Edges 916Mhz

Wireless Receiver for safety edges 916Mhz

Hybrid inverter, Full Solar" version, for powering the automation.

Complete your access control on pedestrian gates with this stainless steel keep, specifically designed for use with a Vera code lock used with Locinox Insert locks.

Created for skilled gate professionals seeking quality, these robust guide rollers boast stainless steel hardware. Boss Hardware's new O-Ring Guide Rollers are designed for residential and smaller commercial gates.

The base plate is designed as a brace fitting for attachments to walls, floors and ceilings. Normally used together with MasterKlamp product type 5.09. Please refer to MasterKlamp product type 4.11 for further specifications. This fitting is not designed to withstand lateral loadings

TonkaTrak is all about engineered extrusions and precision hardware that can be seamlessly integrated creating easy-to-install gates.

Push bar for an easy opening and a free exit of a gate by a simple push.

Stainless-steel keep for Locinox Surface Mount Lock.

Lynx sliding gate guide rollers feature a 41mm diameter nylon roller, and hot dip galvanised 14mm shaft. Available in three sizes, 60mm, 150mm and 250mm. They are a hard wearing cost effective sliding gate guide roller.

Electric strike with keep for Insert Locks by Locinox.

Integrated Magnet Lock for Swing Gates by Locinox. Use with 12v or 24v.

Slide Gate s come in two varieties: Bolt-on or weld-on. Our weld-on model is finished in hot dip gal and includes rubber bumper, whereas our Bolt-on model boasts our new design and a sleek black zinc finish from Boss Hardware.

Fits with Bionik-4. Does not fit Bionik-4-HP

The Roger Technology Monos is a powerful swing gate operator capable of moving gates of up to 400kg or 4m wide.

The Roger Tower TW90-600-HS is a powerful sliding gate operator designed to be hidden inside the gate post, capable of moving gates of up to 600kg at speeds of 25m/m.

Entrapment between the vertical bars of a gate and the guide post or wall is the leading safety concern with automated sliding gates.

An attached to the gate post and used in conjunction with a Sliding Gate Catch. It provides a way of attaching the Catch and also stops the gate from being lifted off the track.

The designed for 80nb posts and perfect for guiding Pipe Mesh gates.

TruGlide is a super convenient way to guide your aluminium sliding gate - especially on sloping driveways.

Sliding bolted to the ground. U shaped, grooved wheels are attached to the underside of a gate enabling it to slide over the track.

Drilling jig to prepare the gate-/strike-post for swing gate locks and according keeps. The jig can be adjusted for profiles 40-50-60 mm. The jig guarantees a perfect center alignment of the Locinox lock/keep on your posts.

The Dino Hinge features a double-bearing design encased in a durable aluminium housing. Its stainless steel bearings ensure the gate opens and closes smoothly. Installation is straightforward with the Quick-Fix system.

The new generation of the Quick-Fix can be reused completely many times thanks to its innovative design. With its 1000kg tensile strength a firm anchoring is always guaranteed.

Gooseneck Intercom post made from aluminium 65 SHS with flange. Rain Hoods and adaptor plates available. Available in black or yellow.

Gooseneck Double Intercom post for Truck plus Car access. Made from aluminium 65 SHS with flange. Rain Hoods and adaptor plates available. Available in black or yellow.

Drilling jig to prepare the gate-/strike-post for sliding gate locks and according keeps. The jig can be adjusted for profiles 40-50-60 mm. The jig guarantees a perfect center alignment of the Locinox lock/keep on your posts.

Wireless exit buttons can be mounted up to 50m away from from your gate or garage door and are a convenient way of opening it for visitors.

Touchless Switches allow a gate or door to be opened by simply swiping your hand in front of the sensor.

Override keyswitch for Doors, Gates, Shutters. Suits indoor or outdoor applications. Can be rekeyed to match your other keys. - Supplied with IP67 rated microswitch with 500mm wiring leads attached - 47mm wide x 117mm high x 42.5mm projection. - Body and Cams made from tough Glass Filled Nylon (blac...

Closely spaced wire lets air flow through and allows visibility but is too narrow for fingers, toes or hand tools.

Introducing the Finn Contour Panel: A fence panel with a twist. The Finn Contour Panel is characterised by closely spaced vertical pickets. This creates a 3d affect to the fence so that it appears more solid when viewed from an angle.

Introducing the. designed to meet the growing need for enhanced security and flexibility in access control. This lock seamlessly integrates with your existing gate, fitting perfectly into its profile. Not only does it offer a sleek aesthetic solution, but it also significantly boosts privacy. Made in Belgium by Locinox. DOES NOT INCLUDE THE INSERT LOCK.

Navi is automation for industrial doors up to 1.5m, 200kg for bifold doors (each leaf) and 2m/300kg for single doors.

Ngaru Mesh 358 is a rigid wire mesh panel that combines high strength and security with a stylish modern look.

The Roger Tower TW110 is a powerful sliding gate operator designed to be hidden inside the gate post, capable of moving gates of up to 1600kg at speeds of 25m/m.

Experience a reliable, low-maintenance solution for guiding slide gates with the Industrial.

The Boss range of sliding gate wheels are a premium quality product without compromise.

The Grande is a powerful operator capable of moving gates to 1500kg at speeds of 25m/m.

The Double Rebate Gate Wheels is engineered to provide the pinnacle of safety and reliability for large industrial sliding gates, of up to 1400kg.

The durable Boss Guide s are constructed with 5mm steel and coated with a black zinc finish and with the Boss range the steel is electroplated zinc with black E-coat on top for a durable lasting finish.

Caracal is a 180 hydraulic hinge for pedestrian gates of 60kg up to 1100mm wide.

The Roger Bionik-4-HP is fast, powerful automatic barrier arm are ideal for commercial applications up to 4m.

The strip is routed inside the sealed barrier arm and connects to the control board. It comes in three sizes and can be trimmed to suit.

The e-Trans-50 is a single channel transceiver for all e-Loop models. It has a single NO output relay connecting to Open on the controller.

The e-Loop Commercial Presence Mode wireless detection module features radar protection.

The e-Diagnostic bidirectional Diagnostics Remote is an essential tool for any frequent installer, offering advanced control over e-Loop settings and diagnostics for troubleshooting. It allows users to adjust a variety of variables on the e-Loops. Once connected, you can view live input values transmitted almost instantaneously from the loops.

Heavy-duty 12mm steel gear rack for slide and cantilever gates to 2500kg. Available as 1m or 2m lengths.

The Red-Green RGB Head Light is used for traffic management but also includes many more colours in addition to red and green. The Red-Green RGB Head Light works together with the RGB Arm strip. An essential addition to high-traffic and public installations.

The features stainless-steel body mechanism and comes as a complete kit with everything you need for the installation. Made in Belgium by Locinox. - 100% Sealed Stainless Steel Body: Ensures durability and resistance to the elements. - Adjustable Self-Latching Bolt and Hook Lock: Made from stainless...

The E-Loop Inground Exit is a wireless exit sensor housed in a super-strong housing for residential or commercial driveways.

The e-Loop inground wireless sensor features 360 degree radar protection.

This Battery kit is a separate IP66 Box that needs to be mounted near the operator. It works for the Roger Bambino motor.

Split fittings are the easiest way to connect round posts and rails when building a chain link fence, tennis court or storage cage.

SYNUS is the new remote from Roger Technology. It is a universal control system, for residential, multi-dwellings, commercial and industrial locations.

Lynx chainlink mesh is manufactured in New Zealand using a Bergandi chain link mesh weaver from the USA. It produces tight knuckles which ensure a deformation resistant mesh. TWIST TOP mesh now available on request (POA).

Split fittings are the easiest way to connect round posts and rails when building a chain link fence, tennis court or storage cage.

Split fittings are the easiest way to connect round posts and rails when building a chain link fence, tennis court or storage cage.

MasterKlamp Pipe Clamp System is engineered for the simple, rapid assembly of tubular structures without the need for welding, bending or threading.

The short tee 0-11, allows two pipes to be joined at any selected angle between 0 and 11. No matter the complexity of the design, MasterKlamp enables quick, on-site construction.

The long tee is designed to give a 90 butt joint between two pipes. This fitting should be used where a join is required between the horizontal pipes, as the sleeve holds two setscrews.

The long tee 0 to 11 allows two pipes to be joined at any selected angle between 0 to 11. Often used together with MasterKlamp product types 2.11 for the middle rail and 4.05 for the rail base flange. this clamp can be used where a join is required between tow in-line pipes, as the sleeve holds two set screws.

The adjustable tee 30 to 60 is used for struts and bracing in structures. It can be used at any selected angle between 30 to 60. Normally used together with MasterKlamp product type 2.04 for the middle rail.

The clamp on tee is designed to give a 90 joint between two pipes. Because of the bolt construction it is an easy add-on fitting for existing structures.

The two socket cross is designed to give a 90 joint between an upright and the middle rail of any rectangular structure such as guard rails. The upright should pass continuously through the fitting.

The three way mid corner is designed to give a 90 corner joint for the middle of any rectangular structure such as a guard or mid railing.

The two socket cross 30 to 45 is designed to give a variable joint between the upright and the middle rail. It can be used at any selected angle between 30 and 45. Normally used together with MasterKlamp product type 1.07 for the top rail.

The crossover 90 is designed to give a 90 crossover joint. Normally used on guard rails and other structures where a continuous horizontal rail is required.

The clamp-on crossover 90 is designed to give a 90 crossover joint between two pipes. Because of the open-end construction it makes an easy add on fitting for existing structures.

The two socket cross 0 to 11 gives a variable joint angle between two pipe lengths from 0 to 11. Often used together with MasterKlamp product types 1.03 or 1.06 for the top rails and 4.05 for the rail base flange.

The elbow 90 is designed to give a 90 elbow joint. Normally used as the end joint for the top rail of guard railings.

The variable elbow 79 to 101 is designed as an elbow joint that can be locked at any selected angle between 79 to 101.

The variable elbow 30 to 60 is designed as an elbow joint that can be locked at any selected angle between 30 to 60.

The base flange is designed as a fixation flange. Normally used as a wall or base flange where only positional fixing is required. It must not be used to support guard railings, balustrade or dependent structures.

The railing base flange is designed as a strong base flange to support vertical posts. The fixing holes in the base should be set in line with the applied load to give maximum strength.

The horizontal base railing support is designed so that pipe can be secured parallel to the fixing surface. Typical applications include guard rails. balustrades and flagpoles. The pipe does not pass completely through the fittings.

The vertical base railing support is designed so that pipe can be secured parallel to the fixing surface. Typical applications include guard rails. balustrades and flagpoles. The pipe does not pass completely through the fittings.

The railing base flange 0 to 11 is designed as a strong base flange to support vertical pots at nacute angel to the ground surface of up to 11. Often used together with MasterKlamp product types 1.03 or 1.06 for the top rials and 2.11 for the mid rails.

The handrail msupport is designed to carry handrails alongside walls. As an alternative it can also be used to attach pipe to floors, walls or ceilings.

The swivel base is designed as a variable angle brace fitting for attachments to walls, floors and ceilings. This fitting is not designed to withstand lateral loadings.

The 4 hole base flange is designed to suit balustrade applications. Four fixing points to offer better attachment and rigidity to the post and the short neck allows for a bottom rail to not pass the 100mm requirement from the ground.

The side palm is designed for fixing pipe close to the wall, such as balustrades and guard rails. The pipe does not pass completely through the fitting.

s are screwed into a wooden fence post (after drilling a pilot hole), and allow a gate with an attached socket to slip over the protruding gudgeon.

s are a simple and effective way of hinging your gate.

Thru Post gudgeon hinges for industrial swing gates are a strong and cost effective way to hang a big gate. Rated up to 350kg for a 1:1 height to width ratio gate.

Weld-on gudgeon hinges for industrial swing gates are a strong and cost effective way to hang a big gate. Rated up to 350kg for a 1:1 height to width ratio gate.

Clamp Hinges are desinged for rural pipe gates. They lock onto the frame of the gate and elminiate the need for welded sockets.

Rising Hinges for Pipe Mesh gates slide inside the gate frame allowing it to rise as it opens.

Lock Thru gudgeon hinges for industrial and rural swing gates are a strong and cost effective way to hang a gate.

Strap Hinges for Timber Rural Gates. Available to suit 16mm and 20mm pin gudgeons and from 150mm right up to 600mm long.

Center bands are used in conjunction with a tensioning bar.

s are used to hang a light weight pipe and mesh gate to a round post.

s are used in conjunction with a tensioning bar and shifts the mesh to the front of the posts.

s use a bolt and bush with a hole in it to allow the fencesmith to tension fencing wire by turning the bolt. Made from hot dip galvanised steel.

The suitable for gates of up to 75mm wide frames and is used in conjunction with Lynx Nylon Rollers.

Box Guide Rollers are a premium guide roller option for industrial sliding gates. They have a hot dip galv bracket and use stainless steel bearing rollers. The ultimate industrial sliding gate guide. The bracket attaches to the side posts on either side of the gate and guide it while preventing sway...

es are an easy way to latch two rural swing gates together.

Boss Slide Gate es are attached to the post at the end of your gate and retain it in the closed position. Used in conjunction with a Boss Gate Nose to prevent scratching of the gate.

The bolts onto the leading edge of your gate to guide it smoothly and quietly into the end catch and prevent scratching. Used with Lynx End Catches

Created for skilled gate professionals seeking quality, these robust guide rollers boast stainless steel hardware. Boss Hardware's new Heavy Duty O-Ring Guide Rollers designed for high frequency usage, commercial and industrial gates.

Created for skilled gate professionals seeking quality, these robust guide rollers boast Boss Hardware's new O-Ring Guide Rollers featuring full stainless steel hardware.

Boss s for sliding gates have a black finish and Japanese NSK bearings.

Nylon sliding gate guide roller and bracket. The easiest way to guide a sliding gate.

s are the best way to guide a gate from one side. The two rollers run against an equal angle section that is part of the gate frame.

LokkBolt is a high-quality, heavy duty drop-bolt for retaining and securing driveway and other residential or commercial gates.

MagnaLatch Child Safety Gate Latches are the safest and most trusted gate latches on the market.

The MagnaLatch Vertical Pull gate latch is the ideal gate latch for use on front gates, pet gates, side gates and perimeter gates.

The MagnaLatch ALERT is the ultimate safety gate latch and the ideal alert device for when you cant turn your back for a second.

The MagnaLatch Side Pull key-lockable model is a general-purpose, magnetic gate latch that offers simple, effective latching for many home and garden gates, and some swimming pool gate applications.

Screws into the top of the TruClose hinge range to prevent the hinge barrel from being used as a toe hold for toddlers with good climbing skills.

Pricing is for a pair of hinges. TruClose Safety Gate Hinges are the world's most trusted child safety gate hinges.

Price is for a pair of hinges. TruClose HEAVY DUTY range of hinges are designed for heavy or high-traffic gates weighing up to 70kg. The engineering-grade polymers and a stainless-steel closing spring deliver hinges designed to last a lifetime. Due to a high degree of safety and reliability, TruClos...

Screws into the top of the TruClose HD hinge range to prevent the hinge barrel from being used as a toe hold for toddlers with good climbing skills.

The T-Latch toggle-action gate latch is remarkably simple and effective.

The 3006-PUSH seamlessly integrates with Locinox Surface Mounted Locks to facilitate easy emergency gate access with just a push. This kit replaces existing handles, ensuring a swift installation on both new and older lock models, while also engaging the day-bolt. Featuring a blinded side, for a neat appearance on the outside.

The adaptor plates are to fit Locinox surface mounted swing and sliding gate locks onto round pipe frames and posts.

Bracket for fitting a Mammoth gate closer on round chain link fence.

High quality aluminium bracket for installation of Tiger gate closer on round chain link fences. The brackets are installed between gate closer and post. A perfect, firm and easy installation is guaranteed thanks to the drilling jig.

Handy toolbox with all components to position the gate frame as opposed to the fixed post upon assembly of the hinges, gate closers and other accessories.

Strong surface mounted ground stop for double wing gates. Drop bolts with a maximum axle of 20 mm are the perfect fit.

Electradrop 24V Drop Bolt for securely locking automated swing gates.

Leonardo is a premium mechanical code lock for sliding gates with aluminium housing and stainless steel mechanism. Use with SSKZ-QF keep for an easy and secure anchoring of the gate lock.

First-grade lock for manual sliding gates with aluminium housing and stainless steel mechanism. The unique Twist-finger and conforming self-correcting keep guarantees a perfect closing of your sliding gate. For a fast and highly precise installation, we recommend using the Drill-Fix drilling jig and sliding gate keep SSKZ-QF.

Extensive range of high-quality european made plastic caps. Available from 35x30mm right up to 150x50mm.

s are used for closing off the open end of SHS.

This knock on round Steel Post Cap is designed to fit externally over a round opening, such as pipe, to close off the open end.

s are to be knocked (with a wooden or rubber mallet) onto the outer surface of square steel tubing.

s are a great way to finish your job with touches that will delight your customer.

Extensive range of high-quality, European made plastic caps. Available to suit 15mm right up to 114m outside diameter pipe.

s for 50shs or 65shs posts. Available ex-stock in mill finish or black powder coated.

Rectangular steel flanges for welding to 50shs sections. Suit applications where there is not space to use a four hole flange, such as on nib walls.

Split fittings are the easiest way to connect round posts and rails when building a chain link fence, tennis court or storage cage.

Split fittings are the easiest way to connect round posts and rails when building a chain link fence, tennis court or storage cage.

Split fittings are the easiest way to connect round posts and rails when building a chain link fence, tennis court or storage cage.

The Square Flange enables you to quickly weld SHS in place. Then you can bolt down the flange to your surface.

All purpose are used to secure (by welding) any steel surface to its fixable flange surface.

for welding to the bottom or side of a length of aluminium. Use 125mm flanges for 50shs and 150mm flanges for 65shs posts.

A pipe sleeve is used when joining two pieces of pipe. These are designed to be a firm fit and require some force to secure it in place.

are used on the legs of pallets, thus allowing them to be safely and securely stacked.

s are used to secure pipe lengths in parallel to each other. Typically these are used to secure temporary fence panels.

Split fittings are the easiest way to connect round posts and rails when building a chain link fence, tennis court or storage cage.

Cais Medium Bearing Hinges are the best way to hang an automated gate of up to 250kg (1:2 height to width ratio). The low friction movement reduces noise and wear on the gate and motor. - The Bottom Hinge has a tapered thrust bearing that transfers the weight of the gate and force of the automation ...

A rubber Bumper attached to an end stop, is designed to be a cushion between the gate and the stopper.

Pintle hinges are strong and reliable and great for automated gates.

Pintle hinges are strong and reliable and great for automated gates.

The end cup supports the gate when it is fully open and fully closed.

The end cup supports the gate when it is fully open and fully closed.

Roller End Catches are the smoothest way to guide your gate into the post. Install between two hoop posts or using the PARK-240 Side bracket.

Park Bracket is a convenient offset bracket for mounting catches and end cups.

The end cap is an optional addition to the gate to cap off the cantilever track.

The end cap is an optional addition to the gate to cap off the cantilever track.

Rebate bearing hinges fit inside the frame of the gate to achieve a clean minimalist finish with very low post to gate gaps.

The end wheel guides the track up into the end cup. Cap sold separately

The end wheel guides the gate up onto the end cup and helps to support the gate while it is resting. Cap sold separately.

Two Roller or Four Roller over-head guide bracket and roller assemblies for Gates of up to 150mm wide.

Steel Cantilever Gate systems are where CAIS made their reputation and the cantilever track production is at the heart of their operation. Enhanced design and superior production from the Czech Republic using high quality German steel. Formed from high quality, heavily galvanized, German steel in an...

Steel Cantilever Gate systems are where CAIS made their reputation and the cantilever track production is at the heart of their operation.

Steel Cantilever Gate systems are where CAIS made their reputation and the cantilever track production is at the heart of their operation.

Steel Cantilever Gate systems are where CAIS made their reputation and the cantilever track production is at the heart of their operation.

Bi-folding Gates are an amazing space-saving invention as the gate arc is half that of a normal swing gate.

Sliding Gate Bolt-on wheel from Cais. 120mm diameter with double bearings and a round groove for 20mm track. Capacity 460kg per gate.

Cais rebate gate wheels are made in the Czech Republic from high quality steel and bearings.

Under-gate Wheels are great for long industrial gates where the driveway may have significant camber and aesthetic is not so important.

The fits inside the track to stop the carriage at the end of its travel.

Eltrak sliding door systems are ideal for sheds big and small. The projects out from the track to support a flashing. custom tab Edgesmith's technicial support provides you with the support you need to have confidence when specifying or installing Eltrak. Download Product Guide /custom tab

The adjustable for different cladding widths in double doors.

The used with the ED19 bracket.

The suitable for doors of up to 200kg.

The used to support the track by bolting it into the purlin.

The for use with the ED19.

The projects the track out from the building so that the door will clear the cladding.

The used with an ED19 and bolt set. The slot in the top allows adjustment for different cladding types.

The supports two door tracks and is designed to be side fixed. Use with ED19 and a bolt set.

The suitable for doors up to 200kg.

The allows the hanger to be used with a wooden door.

The used to join lengths of track for very wide doors.

The used with the EH19 bracket.

The comes in three and is suitable for door of up to 450kg (steel wheel with side thrust bearing).

The has four closely spaced wheels that allow it to run on curved tracks.

Eltrak sliding door systems are ideal for sheds big and small. The allows doors to run along the inside wall of your shed. custom tab Edgesmith's technicial support provides you with the support you need to have confidence when specifying or installing Eltrak. Download Product Guide /custom tab

Eltrak sliding door systems are ideal for sheds big and small. The used to guide the top of bottom rolling doors. custom tab Edgesmith's technicial support provides you with the support you need to have confidence when specifying or installing Eltrak. Download Product Guide /custom tab

The used to support the track by bolting it into the purlin.

The for use with the EH19.

The Hercules Sliding Door Track is suitable for doors up to 450kg.

The projects the track out from the building so that the door will clear the cladding.

Eltrak sliding door systems are ideal for sheds big and small. The supports two door tracks, spacing them appart to clear the cladding of the doors. custom tab Edgesmith's technicial support provides you with the support you need to have confidence when specifying or installing Eltrak. Download Product Guide /custom tab

The used with an EH19 and bolt set. The slot in the top allows adjustment for different cladding types.

The supports two door tracks and is designed to be side fixed. Use with EH19 and a bolt set.

Eltrak sliding door systems are ideal for sheds big and small. The a custom tab Edgesmith's technicial support provides you with the support you need to have confidence when specifying or installing Eltrak. Download Product Guide /custom tab

The attached to the bottom of the door and runs in a channel.

The hinges the bottom of a sectional door and keeps in on track.

The Hercules Sliding Door Four Wheel Single Hinge Hanger is a for the bottom end of a sectional door running on curved track.

The a for light doors.

The used to join lengths of track for very wide doors.

s have a unique 5 sided recess in the head of the fastener meaning that it can only be removed or inserted using the special drive bit.

Quad drive security bolts have a tri-lobular self threading screw.

s provide a permanent fastening that is very hard to remove once installed. They are driven with a socket or spanner.