Discover more like 14mm Safety Flange

Whites complete range of workshop hardware is a must for all workshops. Everything from Washers, Screws, Split Pins, Nuts, Bolts and more The ideal spares to have at the ready for all maintenance, replacement and upgrades for your Japanese rides. All constructed from zinc coated steel, giving a shin...

The base flange is designed as a fixation flange. Normally used as a wall or base flange where only positional fixing is required. It must not be used to support guard railings, balustrade or dependent structures.

Mez Iso Flange - 120i - 130i MEZ Iso flange is ideal for isolated duct systems. The use of this flange with the Klemm capping minimises temperature loss and aids the dissipation of sound

3" Threaded Floor Flange Used in non-cassette style toilet installations, a 3" Threaded Tank Flange is usually bolts onto the black water tank. It allows you to connect the tank to the 3" Toilet Flange by means of a threaded joiner pipe.

Flange 35mm Profile Strong, virtually leak-free rectangular duct connection flange. Our flange comes with an integral mastic sealant to seal against the duct wall and eliminate air loss. Our flange is manufactured from roll-formed galvanized steel and features a unique downturned corner to provide a greater seal than many other brands on the market.

TD06 Rear dump flange New rear mild steel 10mm thick flange to suit our TD06 T3 turbos Turbo Flange Gasket Mitsubishi 4D34 / 6D31 / 6M60T Includes Gasket Listing is for 1x Flange and gasket only

Flange 23mm profile/strong Strong, virtually leak-free rectangular duct connection flange. Our flange comes with an integral mastic sealant to seal against the duct wall and eliminate air loss. Our flange is manufactured from roll-formed galvanized steel and features a unique down turned corner to provide a greater seal than many other brands on the market.

Mez Stainless Steel Flange - 120E - 130E The MEZ flange system allows for speedy, economical connection of ducts as it only needs to be bolted on the four corners. MEZ is stressed to provide uniform pressure over the whole length of the flange ensuring a tight mechanical fit.

The railing base flange 0 to 11 is designed as a strong base flange to support vertical pots at nacute angel to the ground surface of up to 11. Often used together with MasterKlamp product types 1.03 or 1.06 for the top rials and 2.11 for the mid rails.

The Square Flange enables you to quickly weld SHS in place. Then you can bolt down the flange to your surface.

Mez Flange Standard Profile - 120LS - 130LS The MEZ flange system allows for speedy, economical connection of ducts as it only needs to be bolted on the four corners. MEZ is stressed to provide uniform pressure over the whole length of the flange ensuring a tight mechanical fit. It is also injected ...

Mez Aluminium Flange - 121A Profile:20mm, 5m long The MEZ flange system allows for speedy, economical connection of ducts as it only needs to be bolted on the four corners. MEZ is stressed to provide uniform pressure over the whole length of the flange ensuring a tight mechanical fit. It is also inj...

The railing base flange is designed as a strong base flange to support vertical posts. The fixing holes in the base should be set in line with the applied load to give maximum strength.

3" Threaded Floor Flange An important part of a 'Drop-through' or 'Black Water' toilet installations. The toilet bolts to the floor flange (which is screwed to the floor inside the bathroom). The 3" threaded socket on the under side of the flange allows

Mez Cleats - 124 - 134 These 2 metre cleats provide extra stability and precision on larger duct sections. The 124 suits the 20mm profile and the 134 the 30mm of MEZ Flange. Suitable as weather capping for outdoor installation and ideal for mounting in tight areas.

MEZ-SYPHON-FLANGE system 20 is injected with MEZ-BLUEMASTIC-GEL to provide for the manufacturing of air duct systems with high tightness requirements. By placing the MEZ-BLUEMASTIC-GEL inside the MEZ-SYPHON-FLANGE you are able to meet the requirements of air tightness class C D according to EN 1507....

EXPLOREY Winch Hook 12/14mm WILL 5.3T with a safety factor of 5:1. This hook has a termination of 26,500kg Removable pin. All parts included in package. Suitable for 12mm and 14mm ropes.

All purpose are used to secure (by welding) any steel surface to its fixable flange surface.

Lobster Clasps are approximately 14mm. Weight displayed is of 10 pieces. Item is NOT sterling silver. Minimum quantity per order is 10 pieces and will be automatically added in cart. (Example; Add 1 unit to cart = 10 pieces will be added and charged)

Rectangular steel flanges for welding to 50shs sections. Suit applications where there is not space to use a four hole flange, such as on nib walls.

Welcome to Fab Supply Co, your go-to source for high-quality welding consumables and New Zealands exclusive Everlast Welders distributor. Titanium Weld Flange for Turbosmart BOV, models 50mm. Flange only. Does not include clamp.